As filed with the Securities and Exchange Commission on April 1, 2011

Registration No. 333-172917

 

UNITED STATES SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

 

 

Amendment No. 1

to

Form S-1

REGISTRATION STATEMENT

UNDER

THE SECURITIES ACT OF 1933

 

 

U.S. CONCRETE, INC.

(Exact name of registrant as specified in its charter)

 

 

 

2925 Briarpark, Suite 1050

Houston, Texas 77042

(713) 499-6200

(Address, including zip code, and telephone number, including area code, of registrant’s principal executive offices)

 

 

 

Curt M. Lindeman, Esq.

U.S. Concrete, Inc.

2925 Briarpark, Suite 1050

Houston, Texas 77042

(713) 499-6200

(Name, address, including zip code, and telephone number, including area code, of agent for service)

 

 

Copies to:

 

Tracey A. Zaccone, Esq.

Paul, Weiss, Rifkind, Wharton & Garrison LLP

1285 Avenue of the Americas

New York, New York 10019-6064

(212) 373-3000

 

Approximate date of commencement of proposed sale to the public:  From time to time after the effective date of this Registration Statement.

 

If any of the securities being registered on this Form are to be offered on a delayed or continuous basis pursuant to Rule 415 under the Securities Act of 1933, check the following box:  þ 

 

If this Form is filed to register additional securities for an offering pursuant to Rule 462(b) under the Securities Act, please check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering.  o

 

If this Form is a post-effective amendment filed pursuant to Rule 462(c) under the Securities Act, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering.  o

 

If this Form is a post-effective amendment filed pursuant to Rule 462(d) under the Securities Act, check the following box and list the Securities Act registration number of the earlier effective registration statement for the same offering.  o

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

 

(Do not check if a smaller reporting company)

 

 

 

 

CALCULATION OF REGISTRATION FEE

 

 

 

 

 

The Registrant hereby amends this Registration Statement on such date or dates as may be necessary to delay its effective date until the Registrant shall file a further amendment which specifically states that this Registration Statement shall thereafter become effective in accordance with Section 8(a) of the Securities Act of 1933 or until the Registration Statement shall become effective on such date as the Commission, acting pursuant to said Section 8(a), may determine.

 

 

SUBJECT TO COMPLETION, DATED APRIL 1, 2011

 

Prospectus

 

3,044,661 shares of common stock

 

 

U.S. Concrete, Inc.

 

The selling stockholders identified in this prospectus may sell, from time to time, up to 3,044,661 shares of our common stock (the “Securities”). The selling stockholders may offer for sale the shares of our common stock covered by this prospectus in one or more transactions, directly to purchasers or through underwriters, brokers or dealers or agents, in public or private transactions, at fixed prices, prevailing market prices at the times of sale, prices related to the prevailing market prices, varying prices determined at the times of sale or negotiated prices. For additional information on the methods of sale, you should refer to the section of this prospectus entitled “Plan of Distribution.” We will not receive any of the proceeds from the sale of these shares by the selling stockholders. We will bear all expenses in connection with this offering of our common stock, other than any underwriting fees, discounts, selling commissions and stock transfer taxes, if any.

 

The Securities include shares of common stock that are issuable or have been issued upon conversion of our 9.5% Convertible Secured Notes due 2015 (the “Convertible Notes”) and shares of our common stock that may be issued by us to pay interest, premium or other amounts to holders of the Convertible Notes.

 

Our common stock is listed on the Nasdaq Capital Market under the symbol “USCR”. The last reported sale price of our common stock on the Nasdaq Capital Market on March 31, 2011 was $9.51 per share.

 

You should carefully read this prospectus before you invest. Investing in our Securities involves a high degree of risk. See “Risk Factors” beginning on page 5.

 

Neither the Securities and Exchange Commission nor any state securities commission has approved or disapproved of these Securities or determined if this prospectus is truthful or complete. Any representation to the contrary is a criminal offense.

 

The date of this prospectus is          , 2011.

TABLE OF CONTENTS

 

 

ABOUT THIS PROSPECTUS

 

This prospectus is part of a registration statement that we filed with the SEC. You should rely only on the information contained in this prospectus. Neither we nor the selling stockholders have authorized any other person to provide you with different information. If anyone provides you with different or inconsistent information, you should not rely on it. Neither we not the selling stockholders are making an offer to sell these securities in any jurisdiction where the offer or sale is not permitted. You should assume that the information appearing in this prospectus is accurate only as of the date on the front cover of this prospectus or such other date stated in this prospectus.

 

Prospectus Summary

	•	all outstanding obligations under our Old Notes were cancelled and the indenture governing the Old Notes was terminated;
	•	all amounts outstanding under the Revolving Credit, Term Loan and Guarantee Agreement (the “DIP Credit Agreement”) were paid and such agreement was terminated in accordance with its terms;
	•	all of our then existing equity securities, including our common stock (the “Old Common Stock”), all options to purchase the Old Common Stock and all rights to purchase the Company’s Series A Junior Participating Preferred Stock pursuant to a Rights Agreement, dated as of November 5, 2009, were cancelled.
	•	the following equity incentive plans, and all awards granted under such plans, were terminated: (i) 1999 Incentive Plan of U.S. Concrete, Inc.; (ii) U.S. Concrete, Inc. 2000 Employee Stock Purchase Plan; (iii) 2001 Employee Incentive Plan of U.S. Concrete, Inc.; and (iv) U.S. Concrete, Inc. 2008 Incentive Plan;
	•	issuance of (i) approximately 11.9 million shares of Common Stock to holders of the Old Notes, (ii) Class A Warrants (the “Class A Warrants”) to purchase aggregate of approximately 1.5 million shares of common stock to holders of Old Common Stock and (iii) Class B Warrants (the “Class B Warrants”) to purchase aggregate of approximately 1.5 million shares of common stock to holders of Old Common Stock, (see Note 16 to our consolidated financial statements for more information on the Class A and Class B Warrants);
	•	adoption of a management equity incentive plan (the “Incentive Plan”), under which 9.5% of the equity of the reorganized Company authorized pursuant to the Plan, on a fully-diluted basis, is reserved for issuance as equity-based awards to management and employees, and 0.5% of such equity, on a fully-diluted basis, is reserved for issuance to directors of the reorganized Company;
	•	entry into a new credit agreement, dated as of August 31, 2010 (the “Credit Agreement”), which provides for a $75.0 million asset-based revolving credit facility (the “Revolving Facility”), (see “Liquidity and Capital Resources” below for more information on the Credit Agreement); and
	•	issuance of $55.0 million aggregate principal amount of 9.5% Convertible Secured Notes due 2015 (the “Convertible Notes”) pursuant to a subscription offering, (see “Liquidity and Capital Resources” below for more information on the Convertible Notes).

Issuer		U.S. Concrete, Inc.

Common stock outstanding before this offering		As of March 29, 2011, 11,943,869 shares of our common stock were issued and outstanding.

Common stock offered by us		None.

Common stock offered by the selling stockholders		This prospectus relates to the resale by the selling stockholders described in the section entitled “Selling Stockholders” beginning on page 94 of up to 3,044,661 shares of our common stock (the “Securities”). These shares of common stock are issued or issuable upon conversion of the 9.5% Convertible Secured Notes due 2015 (the “Conversion Notes”). The Securities also include shares of our common stock that may be issued by us to pay interest, premium or other amounts to holders of the Convertible Notes. See the “Plan of Distribution” section of this prospectus for additional information concerning the manner in which the Securities may be offered.

Common stock outstanding after this offering		14,988,530 shares of our common stock, assuming that all of the Convertible Notes held by the selling stockholders are converted into shares of our common stock and no shares are issued to pay interest, premium or other amounts.(1)

Use of proceeds		We will not receive any proceeds from the resale of securities by the selling stockholders. See the “Use of Proceeds” section of this prospectus for additional information.
Nasdaq symbol		“USCR.”
Risk Factors		You should read the “Risk Factors” section of this prospectus beginning on page 5 for a discussion of factors that you should consider carefully before deciding to invest in our common stock.

(1)		Unless otherwise specified, the number of shares of our common stock outstanding after this offering is based on 11,943,869 shares outstanding as of March 29, 2011 and assumes no exercise of our Class A Warrants or Class B Warrants to purchase shares of our common stock or other outstanding securities that are convertible into or exercisable or exchangeable for our common stock other than the Convertible Notes held by the selling stockholders. As of December 31, 2010, there were 2,243,933 shares of our common stock reserved for issuance under our management equity incentive plan, including 786,969 shares underlying outstanding awards.

 

Investing in our common stock involves substantial risks. In addition to the other information in this prospectus, you should carefully read and consider the risk factors set forth below before deciding to invest in our common stock. Any of the following risks could adversely affect our business, results of operations, financial condition and liquidity. The market price of our common stock could decline if one or more of these risks and uncertainties develop into actual events, causing you to lose all or part of your investment in our common stock. Certain statements in “Risk Factors” are forward-looking statements. See “Cautionary Note Regarding Forward-Looking Statements.”

 

Risks Associated With Our Business

 

Further tightening of mortgage lending or mortgage financing requirements could adversely affect the residential construction market and prolong the downturn in, or further reduce, the demand for new home construction, which began in 2006 and has had a negative effect on our sales volumes and revenues.

 

Since 2006, the mortgage lending and mortgage finance industries experienced significant instability due to, among other things, defaults on subprime loans and adjustable rate mortgages. In light of these developments, lenders, investors, regulators and other third parties have questioned the adequacy of lending standards and other credit requirements for several loan programs made available to borrowers in recent years. This has led to reduced investor demand for mortgage loans and mortgage-backed securities, reduced market values for those securities, tightened credit requirements, reduced liquidity, increased credit risk premiums and increased regulatory actions. Deterioration in credit quality among subprime and other loans has caused many lenders to eliminate subprime mortgages and other loan products that do not conform to Fannie Mae, Freddie Mac, FHA or VA standards. Fewer loan products and tighter loan qualifications in turn make it more difficult for some categories of borrowers to finance the purchase of new homes. In general, these developments have been a significant factor in the downturn of, and have delayed any general improvement in, the housing market.

 

Approximately 19% of our 2010 revenue was from residential construction contractors. Further tightening of mortgage lending or mortgage financing requirements could adversely affect the availability to obtain credit for some borrowers and prolong the downturn in, or further reduce the demand for, new home construction, which could have a material adverse effect on our business and results of operations in 2011. A further downturn in new home construction could also adversely affect our customers focused in this industry segment, possibly resulting in slower payments, higher default rates in our accounts receivable, and an overall increase in working capital.

 

There are risks related to our internal growth and operating strategy.

 

Our ability to generate internal growth will be affected by, among other factors, our ability to:

 

 

Our inability to achieve internal growth could materially and adversely affect our business, financial condition, results of operations and cash flows.

 

One key component of our operating strategy is to operate our businesses on a decentralized basis, with local or regional management retaining responsibility for day-to-day operations, profitability and the internal growth of the individual business. If we do not implement and maintain proper overall business controls, this decentralized operating strategy could result in inconsistent operating and financial practices and our overall profitability could be adversely affected.

Our operating results may vary significantly from one reporting period to another and may be adversely affected by the seasonal and cyclical nature of the markets we serve.

 

The ready-mixed concrete and precast concrete businesses are seasonal. In particular, demand for our products and services during the winter months is typically lower than in other months because of inclement winter weather. In addition, sustained periods of inclement weather or permitting delays could postpone or delay projects over geographic regions of the United States, and consequently, could adversely affect our business, financial condition, results of operations and cash flows. The relative demand for our products is a function of the highly cyclical construction industry. As a result, our revenues may be adversely affected by declines in the construction industry generally and in our local markets. Our results also may be materially affected by:

 

 

As a result, our operating results in any particular quarter may not be indicative of the results that you can expect for any other quarter or for the entire year. Furthermore, negative trends in the ready-mixed concrete industry or in our geographic markets could have material adverse effects on our business, financial condition, results of operations and cash flows.

 

We may lose business to competitors who underbid us, and we may be otherwise unable to compete favorably in our highly competitive industry.

 

Our competitive position in a given market depends largely on the location and operating costs of our plants and prevailing prices in that market. Generally, our products are price-sensitive. Our prices are subject to changes in response to relatively minor fluctuations in supply and demand, general economic conditions and market conditions, all of which are beyond our control. Because of the fixed-cost nature of our business, our overall profitability is sensitive to minor variations in sales volumes and small shifts in the balance between supply and demand. Price is the primary competitive factor among suppliers for small or less complex jobs, principally in residential construction. However, timeliness of delivery and consistency of quality and service, as well as price, are the principal competitive factors among suppliers for large or complex jobs. Concrete manufacturers like us generally obtain customer contracts through local sales and marketing efforts directed at general contractors, developers, governmental agencies and homebuilders. As a result, we depend on local relationships. We generally do not have long-term sales contracts with our customers.

 

Our competitors range from small, owner-operated private companies to subsidiaries or operating units of large, vertically integrated manufacturers of cement and aggregates. Our vertically integrated competitors generally have greater manufacturing, financial and marketing resources than we have, providing them with

competitive advantages. Competitors having lower operating costs than we do or having the financial resources to enable them to accept lower margins than we do will have competitive advantages over us for jobs that are particularly price-sensitive. Competitors having greater financial resources or less financial leverage than we do to invest in new mixer trucks, build plants in new areas or pay for acquisitions also will have competitive advantages over us.

 

We depend on third parties for concrete equipment and supplies essential to operate our business.

 

We rely on third parties to sell or lease property, plant and equipment to us and to provide us with supplies, including cement and other raw materials, necessary for our operations. We cannot assure you that our favorable working relationships with our suppliers will continue in the future. Also, there have historically been periods of supply shortages in the concrete industry, particularly in a strong economy.

 

If we are unable to purchase or lease necessary properties or equipment, our operations could be severely impacted. If we lose our supply contracts and receive insufficient supplies from other third parties to meet our customers’ needs or if our suppliers experience price increases or disruptions to their business, such as labor disputes, supply shortages or distribution problems, our business, financial condition, results of operations and cash flows could be materially adversely affected.

 

In 2006, cement prices rose at rates similar to those experienced in 2005 and 2004, as a result of strong domestic consumption driven largely by historic levels of residential construction that did not abate until the second half of 2006. During 2007 through 2010, residential construction slowed significantly, which resulted in a decline in the demand for ready-mixed concrete. Cement prices remained relatively flat in 2010, while cement supplies were at levels that indicated a very low risk of cement shortages in our markets. Should demand increase substantially beyond our current expectations, we could experience shortages of cement in future periods, which could adversely affect our operating results, through both decreased sales and higher cost of raw materials.

 

The departure of key personnel could disrupt our business.

 

We depend on the efforts of our executive officers and, in many cases, on senior management of our businesses. Our success will depend on retaining our senior-level managers and officers. We need to insure that key personnel are compensated fairly and competitively to reduce the risk of departure of key personnel to our competitors or other industries. To the extent we are unable to attract and retain qualified management personnel, our business, financial condition, results of operations and cash flows could be materially and adversely affected. We do not carry key personnel life insurance on any of our employees.

 

We may be unable to attract and retain qualified employees.

 

Our ability to provide high-quality products and services on a timely basis depends on our success in employing an adequate number of skilled plant managers, technicians and drivers. Like many of our competitors, we experience shortages of qualified personnel from time to time. We may not be able to maintain an adequate skilled labor force necessary to operate efficiently and to support our growth strategy, and our labor expenses may increase as a result of a shortage in the supply of skilled personnel.

 

Collective bargaining agreements, work stoppages and other labor relations matters may result in increases in our operating costs, disruptions in our business and decreases in our earnings.

 

As of March 29, 2011, approximately 35%, or 686, of our employees were covered by collective bargaining agreements, which expire between 2011 and 2013. Our inability to negotiate acceptable new contracts or extensions of existing contracts with these unions could cause work stoppages by the affected employees. In addition, any new contracts or extensions could result in increased operating costs attributable to both union and nonunion employees. If any such work stoppages were to occur, or if other of our employees were to become represented by a union, we could experience a significant disruption of our operations and higher ongoing labor costs, which could materially adversely affect our business, financial

condition, results of operations and cash flows. Also, labor relations matters affecting our suppliers of cement and aggregates could adversely impact our business from time to time.

 

We contribute to 18 multiemployer pension plans. During 2006, the “Pension Protection Act of 2006” (the “PPA”) was signed into law. For multiemployer defined benefit plans, the PPA establishes new funding requirements or rehabilitation requirements, creates additional funding rules for plans that are in endangered or critical status, and introduces enhanced disclosure requirements to participants regarding a plan’s funding status. The Worker, Retiree and Employer Recovery Act of 2008 (the “WRERA”) was enacted in late 2008 and provided some funding relief to defined benefit plan sponsors affected by recent market conditions. The WRERA allowed multiemployer plan sponsors to elect to freeze their current fund status at the same funding status as the preceding plan year (for example, a calendar year plan that was not in critical or endangered status for 2008 was able to elect to retain that status for 2009), and sponsors of multiemployer plans in endangered or critical status in plan years beginning in 2008 or 2009 were allowed a three-year extension of funding improvement or rehabilitation plans (extended the timeline for these plans to accomplish their goals from 10 years to 13 years, or from 15 years to 18 years for seriously endangered plans). Additionally, if we were to withdraw partially or completely from any plan that is underfunded, we would be liable for a proportionate share of that plan’s unfunded vested benefits. Based on the information available from plan administrators, we believe that our portion of the contingent liability in the case of a full or partial withdrawal from or termination of several of these plans or the inability of plan sponsors to meet the funding or rehabilitation requirements would be material to our business financial condition, results of operations and cash flows.

 

Our overall profitability is sensitive to price changes and minor variations in sales volumes.

 

Generally, our products are price-sensitive. Prices for our products are subject to changes in response to relatively minor fluctuations in supply and demand, general economic conditions and market conditions, all of which are beyond our control. Because of the fixed-cost nature of our business, our overall profitability is sensitive to price changes and minor variations in sales volumes.

 

The global financial crisis may impact our business and financial condition in ways that we currently cannot predict.

 

Adverse or worsening economic trends or the continuation of the current economic situation could have a negative impact on our suppliers and our customers and their financial condition and liquidity, which could cause them to fail to meet their obligations to us and could have a material adverse effect on our revenues, income from operations and cash flows. The uncertainty and volatility of the global financial crisis may have further impacts on our business and financial condition that we currently cannot predict or anticipate.

 

The turmoil in the global financial system may have an impact on our business and our financial condition. Accordingly, our ability to access the capital markets may be restricted or be available only on unfavorable terms. Limited access to the capital markets could adversely impact our ability to take advantage of business opportunities or react to changing economic and business conditions and could adversely impact our ability to execute our long-term growth strategy. Ultimately, we may be required to reduce our future capital expenditures substantially. Such a reduction could have a material adverse effect on our revenues, income from operations and cash flows.

 

If one or more of the lenders under our senior secured credit facility were to become unable or unwilling to perform their obligations under that facility, our borrowing capacity could be reduced. Our inability to borrow additional amounts under our senior secured credit facility could limit our ability to fund our future operations and growth.

 

Our substantial indebtedness could adversely affect our financial condition and prevent us from fulfilling our obligations under the Convertible Notes.

 

We have approximately $55.0 million of outstanding senior indebtedness represented by the Convertible Notes. The Revolving Facility provides for aggregate borrowings up to $75.0 million. As of December 31, 2010,

we had approximately $8.0 million drawn under the Revolving Facility. As a result, we are a highly leveraged company. This level of indebtedness could have important consequences to you, including the following:

 

 

If we are unable to return to profitability and/or if current economic conditions do not improve in the foreseeable future, we may not be able to generate sufficient cash flow from operations in the future to allow us to service our debt, pay our other obligations as required and make necessary capital expenditures, in which case we may need to dispose of additional assets and/or minimize capital expenditures and/or try to raise additional financing. There is no assurance that any of these alternatives would be available to us, if at all, on satisfactory terms.

 

We may not be able to generate sufficient cash flows to meet our debt service obligations.

 

Our ability to make payments on and to refinance our indebtedness, including the Convertible Notes, and to fund planned capital expenditures will depend on our ability to generate cash from our operations’ in the future. This, to a certain extent, is subject to general economic, financial, competitive, legislative, regulatory and other factors that are beyond our control.

 

Our business may not generate sufficient cash flow from operations and future sources of capital under the Revolving Facility or otherwise may not be available to us in an amount sufficient to enable us to pay our indebtedness, including the Convertible Notes, or to fund our other liquidity needs. If we complete an acquisition, our debt service requirements could increase. We may need to refinance or restructure all or a portion of our indebtedness, including the Convertible Notes, on or before maturity. We may not be able to refinance any of our indebtedness, including the Revolving Facility and the Convertible Notes, on commercially reasonable terms, or at all. If we cannot service our indebtedness, we may have to take actions such as selling assets, seeking additional equity or reducing or delaying capital expenditures, strategic acquisitions, investments and alliances. We may not be able to effect such actions, if necessary, on commercially reasonable terms, or at all.

 

The Convertible Notes Indenture and the Revolving Facility will restrict our ability to operate our business and to pursue our business strategies.

 

The Revolving Facility and the Convertible Notes Indenture limit our ability, among other things, to:

 

 

 

Our failure to comply with the covenants contained in the agreement governing the Revolving Facility or our other debt agreements, including as a result of events beyond our control, could result in an event of default which could materially and adversely affect our operating results and our financial condition.

 

The Revolving Facility contains certain financial covenants. In addition, the Revolving Facility requires us to comply with various operational and other covenants. If there were an event of default under any of our debt instruments that was not cured or waived, the holders of the defaulted debt could cause all amounts outstanding with respect to the debt to be due and payable immediately. Our assets and cash flow may not be sufficient to fully repay borrowings under our outstanding debt instruments, either upon maturity or if accelerated upon an event of default. If we were required to repurchase the Convertible Notes or any of our other debt securities upon a change of control, we may not be able to refinance or restructure the payments on those debt securities. If, as or when required, we are unable to repay, refinance or restructure our indebtedness under, or amend the covenants contained in, the Revolving Facility, the lenders thereunder could elect to terminate their commitments thereunder, cease making further loans and institute foreclosure proceedings against the collateral which secures our obligations under the Revolving Facility on a first-priority basis, which also secures the Convertible Notes on a second-priority basis. Any such actions could force us into bankruptcy or liquidation.

 

Governmental regulations, including environmental regulations, may result in increases in our operating costs and capital expenditures and decreases in our earnings.

 

A wide range of federal, state and local laws, ordinances and regulations apply to our operations, including the following matters:

 

 

In many instances, we must have various certificates, permits or licenses in order to conduct our business. Our failure to maintain required certificates, permits or licenses or to comply with applicable governmental requirements could result in substantial fines or possible revocation of our authority to conduct some of our operations. Delays in obtaining approvals for the transfer or grant of certificates, permits or licenses, or failure to obtain new certificates, permits or licenses, could impede the implementation of any acquisitions.

 

Governmental requirements that impact our operations include those relating to air quality, solid waste management and water quality. These requirements are complex and subject to frequent change. They impose strict liability in some cases without regard to negligence or fault and may expose us to liability for the conduct of or conditions caused by others, or for our acts that complied with all applicable requirements when we performed them. Our compliance with amended, new or more stringent requirements, stricter interpretations

of existing requirements, or the future discovery of environmental conditions may require us to make unanticipated material expenditures. In addition, we may fail to identify or obtain indemnification from environmental liabilities of acquired businesses. We generally do not maintain insurance to cover environmental liabilities.

 

Our operations are subject to various hazards that may cause personal injury or property damage and increase our operating costs.

 

Operating mixer trucks, particularly when loaded, exposes our drivers and others to traffic hazards. Our drivers are subject to the usual hazards associated with providing services on construction sites, while our plant personnel are subject to the hazards associated with moving and storing large quantities of heavy raw materials. Operating hazards can cause personal injury and loss of life, damage to or destruction of property, plant and equipment and environmental damage. Although we conduct training programs designed to reduce these risks, we cannot eliminate these risks. We maintain insurance coverage in amounts we believe are in accord with industry practice; however, this insurance may not be adequate to cover all losses or liabilities we may incur in our operations, and we may not be able to maintain insurance of the types or at levels we deem necessary or adequate or at rates we consider reasonable. A partially or completely uninsured claim, if successful and of sufficient magnitude, could have a material adverse effect on us.

 

The insurance policies we maintain are subject to varying levels of deductibles. Losses up to the deductible amounts are accrued based on our estimates of the ultimate liability for claims incurred and an estimate of claims incurred but not reported. If we were to experience insurance claims or costs above our estimates, our business, financial condition, results of operations and cash flows might be materially and adversely affected.

 

We may incur material costs and losses as a result of claims our products do not meet regulatory requirements or contractual specifications.

 

Our operations involve providing products that must meet building code or other regulatory requirements and contractual specifications for durability, stress-level capacity, weight-bearing capacity and other characteristics. If we fail or are unable to provide products meeting these requirements and specifications, material claims may arise against us and our reputation could be damaged. In the past, we have had significant claims of this kind asserted against us that we have resolved. There currently are claims, and we expect that in the future there will be additional claims, of this kind asserted against us. If a significant product-related claim or claims are resolved against us in the future, that resolution may have a material adverse effect on our business, financial condition, results of operations and cash flows.

 

Our net revenue attributable to infrastructure projects could be negatively impacted by a decrease or delay in governmental spending.

 

Our business depends in part on the level of governmental spending on infrastructure projects in our markets. Reduced levels of governmental funding for public works projects or delays in that funding could adversely affect our business, financial condition, results of operations and cash flows.

 

Some of our plants are susceptible to damage from earthquakes, for which we have a limited amount of insurance.

 

We maintain only a limited amount of earthquake insurance, and, therefore, we are not fully insured against earthquake risk. Any significant earthquake damage to our plants could materially adversely affect our business, financial condition, results of operations and cash flows.

 

Increasing insurance claims and expenses could lower our profitability and increase our business risk.

 

The nature of our business subjects us to product liability, property damage and personal injury claims. Increased premiums charged by insurance carriers may further increase our insurance expense as coverage expires or otherwise cause us to raise our self-insured retention. If the number or severity of claims within our

self-insured retention increases, we could suffer losses in excess of our reserves. An unusually large liability claim or a string of claims based on a failure repeated throughout our mass production process may exceed our insurance coverage or result in direct damages if we were unable or elected not to insure against certain hazards because of high premiums or other reasons. In addition, the availability of, and our ability to collect on, insurance coverage is often subject to factors beyond our control.

 

Applicable accounting rules relating to the conversion features of the Convertible Notes will result in increased non-cash interest expense and may cause volatility in our results of operations due to the requirement to adjust any derivative liability associated with the conversion features to fair value each quarter.

 

The conversion features contained within the Convertible Notes are deemed to be an embedded derivative under ASC Topic 815, Derivatives and Hedging (“ASC 815”). In accordance with ASC 815, an embedded derivative related to the conversion features requires bifurcation from the debt component of the Convertible Notes and a separate valuation. We recognize the embedded derivative as a liability on our balance sheet, measure it at its estimated fair value and recognize changes in its estimated fair value within our results of operations each quarter. We estimate the fair value of the embedded derivative using acceptable valuation methodologies. Valuation methodologies are complex and require significant judgments. Additionally, given the volatility of our stock price and the stock price of other comparable companies, which have a direct impact on our valuation, future changes in the estimated fair value of the conversion features of the Convertible Notes may have a material impact on our results of operations. As a result of the required bifurcation of the embedded derivative related to the conversion features of the Convertible Notes under ASC 815, the carrying value of the Convertible Notes at issuance was less than the $55.0 million face value of the Convertible Notes. The difference between the face value and the carrying value of the Convertible Notes as of the date of issuance will be reflected as an increase to our interest expense using the effective interest rate method over the term of the Convertible Notes. This discount accretion will result in a significantly higher rate of noncash interest expense within our results of operations over the stated interest rate of the Convertible Notes and a corresponding decrease to our net income.

 

Risks Related to Our Common Stock

 

We do not intend to pay dividends on our common stock.

 

We have not declared or paid any dividends on our common stock to date, and we do not anticipate paying any dividends on our common stock in the foreseeable future. We intend to reinvest all future earnings in the development and growth of our business. In addition, our Revolving Facility and the indenture governing our Convertible Notes prohibits us from paying dividends and future loan agreements may also prohibit the payment of dividends. Any future determination relating to our dividend policy will be at the discretion of our board of directors and will depend on our results of operations, financial condition, capital requirements, business opportunities, contractual restrictions and other factors deemed relevant. To the extent we do not pay dividends on our common stock, investors must look solely to stock appreciation for a return on their investment in our common stock. Investors seeking cash dividends should not purchase our common stock.

 

Our stock price may be volatile and you may be unable to resell your shares at or above the offering price.

 

In recent years the stock market has experienced significant price and volume fluctuations that are often unrelated to the operating performance of specific companies. The market price of our common stock may fluctuate based on a number of factors, including:

 

 

 

A large number of our shares are eligible for future sale which could depress our stock price.

 

The selling stockholders will beneficially own approximately 33.6% of the outstanding shares of our common stock assuming the conversion of all Convertible Notes beneficially owned by the selling stockholders into shares of our common stock without regard to the conversion cap set forth in the indenture governing the Convertible Notes that prohibits the conversion of the Convertible Notes by a holder if such conversion would result in the holder and its affiliates beneficially owning more than 9.9% of the Company’s issued and outstanding common stock. Subject to holding period, volume, manner of sale limitations and certain other requirements, these shares can be sold pursuant to Rule 144 under the Securities Act of 1933, as amended (the “Securities Act”). In addition, we have granted these stockholders registration rights as described in “Selling Stockholders — Material Relationships with the Selling Stockholders — Registration Rights Agreement.” Sales of a substantial number of these shares of our common stock, or the perception that a large number of these shares will be sold, could depress the market price of our common stock. This could also impair our ability to raise additional capital in the future through the sale of our equity securities.

 

Our amended and restated certificate of incorporation, third amended and restated bylaws and Delaware law contain provisions that could discourage acquisition bids or merger proposals, which may adversely affect the market price of our common stock.

 

Provisions in our amended and restated certificate of incorporation, our third amended and restated bylaws and applicable provisions of the General Corporation Law of the State of Delaware may make it more difficult or expensive for a third party to acquire control of us even if a change of control would be beneficial to the interests of our stockholders. These provisions could discourage potential takeover attempts and could adversely affect the market price of our common stock. In addition, Delaware law prohibits us from engaging in any business combination with any “interested stockholder,” meaning generally that a stockholder who beneficially owns more than 15% of our common stock cannot acquire us for a period of three years from the date this person became an interested stockholder, unless various conditions are met, such as approval of the transaction by our board of directors.

 

This prospectus contains “forward-looking statements.” These statements relate to future events or our future financial performance. In some cases, you can identify forward-looking statements by terminology such as “may,” “will,” “should,” “expect,” “plan,” “anticipate,” “believe,” “estimate,” “predict,” “potential” or “continue,” the negative of such terms or other comparable terminology. These statements are only predictions. Actual events or results may differ materially.

 

Although we believe that the expectations reflected in the forward-looking statements are reasonable, we cannot guarantee future results, levels of activity, performance or achievements. Moreover, neither we nor any other person assumes responsibility for the accuracy and completeness of the forward-looking statements. All written and oral forward-looking statements made in connection with this prospectus that are attributable to us or persons acting on our behalf are expressly qualified in their entirety by the “Risk Factors” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” sections and other cautionary statements included in this prospectus. We are under no duty to update any of the forward-looking statements after the date of this prospectus to conform such statements to actual results or to changes in our expectations, except as required by federal securities laws.

 

There can be no assurance that other factors will not affect the accuracy of these forward-looking statements or that our actual results will not differ materially from the results anticipated in such forward-looking statements. Unpredictable or unknown factors we have not discussed in this prospectus also could have material adverse effects on actual results of matters that are the subject of our forward-looking statements. We do not intend to update our description of important factors each time a potential important factor arises. We advise our existing and potential security holders that they should (1) be aware that important factors to which we do not refer in this prospectus could affect the accuracy of our forward-looking statements and (2) use caution and common sense when considering our forward-looking statements.

 

The selling stockholders will receive all of the proceeds from the sale of the common stock offered by this prospectus. We will not receive any proceeds from the sale of our common stock by the selling stockholders.

 

Our Old Common Stock ceased trading on the NASDAQ Global Market on May 10, 2010 and was traded in the over-the-counter market under the symbol RMIX.PK until the Effective Date. Upon the Effective Date of the Plan, the Old Common Stock was cancelled and holders of the Old Common Stock received Class A Warrants and Class B Warrants. The holders of the Old Notes were issued 11.9 million shares of new common stock on the Effective Date which began trading on the over-the-counter Bulletin Board (the “OTC Bulletin Board” or “OTC BB”) on October 15, 2010 under the symbol “USCR”. The new common stock was listed and began trading on the NASDAQ Capital Market on February 1, 2011 under the symbol “USCR”. The share price of the Old Common Stock bears no relation to the share price of the new common stock.

 

As of March 29, 2011, shares of our common stock were held by approximately 1,089 stockholders of record. The number of record holders does not necessarily bear any relationship to the number of beneficial owners of our common stock.

 

The closing price for our common stock on the NASDAQ Capital Market on March 31, 2011 was $9.51 per share. The following table sets forth, for the periods indicated, the range of high and low sales prices for our common stock:

 

 

There were no trades of our common stock from the Effective Date through October 14, 2010.

 

 

We have not paid or declared any dividends since our formation and currently do not intend to pay dividends in 2011. Additional information concerning restrictions on our payment of cash dividends may be found below in “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Liquidity and Capital Resources” and Note 13 to our consolidated financial statements in this prospectus.

 

Statements we make in the following discussion that express a belief, expectation or intention, as well as those that are not historical fact are forward-looking statements that are subject to various risks, uncertainties and assumptions. Our actual results, performance or achievements, or market conditions or industry results, could differ materially from those we express in the following discussion as a result of a variety of factors, including the risks and uncertainties to which we refer above under the headings “Cautionary Note Regarding Forward-Looking Statements” and “Risk Factors.”

 

Our Business

 

We operate our business in two business segments: ready-mixed concrete and concrete-related products and precast concrete products.

 

Ready-Mixed Concrete and Concrete-Related Products.  Our ready-mixed concrete and concrete-related products segment is engaged primarily in the production, sale and delivery of ready-mixed concrete to our customers’ job sites. To a lesser extent, this segment is engaged in the mining and sale of aggregates; and the resale of building materials, primarily to our ready-mixed concrete customers. We provide these products and services from our operations in north and west Texas, northern California, New Jersey, New York, Washington, D.C. and Oklahoma.

 

Precast Concrete Products.  Our precast concrete products segment engages principally in the production, distribution and sale of precast concrete products from our seven precast plants located in California, Arizona and Pennsylvania. From these facilities, we produce precast concrete structures such as utility vaults, manholes and other wastewater management products, specialty engineered structures, pre-stressed bridge girders, concrete piles, curb-inlets, catch basins, retaining and other wall systems, custom designed architectural products and other precast concrete products.

 

We derive substantially all our revenues from the sale of ready-mixed concrete, precast concrete and concrete-related products to the construction industry in the United States. We typically sell our products under purchase orders that require us to formulate, prepare and deliver the product to our customers’ job sites. The principal states in which we operate are Texas, California and New Jersey/New York. Revenue from continuing operations was 36% in 2010 and 38% in 2009 in Texas, 25% in 2010 and 26% in 2009 in California, and 19% in 2010 and 17% in 2009 in New Jersey/New York. We serve substantially all segments of the construction industry in our markets. Our customers include contractors for commercial and industrial, residential, street and highway and other public works construction. The approximate percentages of our concrete product revenue by construction type activity were as follows in 2010 and 2009:

 

 

The markets for our products are generally local, and our operating results are subject to fluctuations in the level and mix of construction activity that occur in our markets. The level of activity affects the demand for our products, while the product mix of activity among the various segments of the construction industry affects both our relative competitive strengths and our operating margins. Commercial and industrial projects generally provide more opportunities to sell value-added products that are designed to meet the high-performance requirements of these types of projects.

 

Our customers are generally involved in the construction industry, which is a cyclical business and is subject to general and more localized economic conditions, including the recessionary conditions impacting all our markets. In addition, our business is impacted by seasonal variations in weather conditions, which vary by regional market. Accordingly, demand for our products and services during the winter months are typically lower than in other months of the year because of inclement weather. Also, sustained periods of inclement

weather and other adverse weather conditions could cause the delay of construction projects during other times of the year.

 

Market Trends and Restructuring

 

Since the middle of 2006, the United States building materials construction market has been challenging. Currently, the construction industry, particularly the ready-mixed concrete industry, is characterized by significant overcapacity and fierce competitive activity. However, the fourth quarter of 2010 showed what we believe are positive signs with a 3.3% increase in revenue from continuing operations and an 8.6% increase in ready-mix concrete sales volume compared to the fourth quarter of 2009. The year-over-year volume increase is the first since the third quarter of 2007. While our average sales prices declined approximately 1.5% in the fourth quarter of 2010 compared to the same period in 2009, the decline was relatively modest.

 

From 2007 through 2010, we implemented a variety of cost reduction initiatives to deal with the challenging conditions, including workforce reductions, suspension of employee benefits, temporary plant idling, rolling stock dispositions and divestitures of underperforming business units to reduce our operating and fixed costs. Despite these initiatives, our business and financial performance was severely affected by the overall downturn in construction activity, particularly the steep decline in single-family home starts in the U.S. residential construction markets, the previous turmoil in the global credit markets and the U.S. economic downturn. These conditions have had a significant impact on demand for our products since the middle of 2006 and continuing through 2010. During 2007, 2008 and 2009, single family home starts declined significantly, and commercial construction activity, which has been negatively affected by the recent U.S. economic downturn, was weaker in most of our markets in 2010 when compared to 2009. Sales volumes in our precast operations have also been significantly affected due to the dramatic downturn in residential construction and weaker commercial activity. We have also experienced pricing pressure due to lower demand and our ready-mixed concrete pricing declined in 2010 compared to 2009 in most of our markets, which negatively impacted our gross margins.

 

The continued weak economic conditions, including ongoing softness in residential construction, reduction in demand in the commercial sector and delays in anticipated public works projects in many of our markets, combined to cause a significant reduction in our liquidity during 2010. We retained legal and financial advisors to assist us in reviewing the strategic and financing alternatives available to us. We also engaged in discussions with the holders of our Old Notes regarding a permanent restructuring of our capital structure.

 

Chapter 11 Bankruptcy and Emergence

 

We reached an agreement with a substantial majority of the holders of our Old Notes on the terms of a comprehensive debt restructuring plan in April 2010. To implement the restructuring, on Petition Date, the Debtors filed voluntary petitions in the Bankruptcy Court seeking relief under the provisions of Chapter 11 of Title 11 of the Bankruptcy Code. The Bankruptcy Court ordered joint administration of the Chapter 11 Cases under the lead case: In re U.S. Concrete, Inc., Case No. 10-11407.

 

On July 29, 2010, the Bankruptcy Court entered an order confirming the Debtors’ Plan pursuant to Chapter 11 of the Bankruptcy Code. On the Effective Date, the Debtors consummated their reorganization under the Bankruptcy Code and the Plan became effective.

 

The consummation, on the Effective Date, of our reorganization under the Plan provided for the following:

 

 

 

Our Old Common Stock ceased trading on the NASDAQ Global Market on May 10, 2010 and was traded in the over-the-counter market until the Effective Date. Upon the Effective Date of the Plan, the Old Common Stock was cancelled and holders of the Old Common Stock received Class A Warrants and Class B Warrants. The common stock issued to holders of the Old Notes on the Effective Date began trading on the OTC Bulletin Board on October 15, 2010 under the symbol “USCR” and began trading on the NASDAQ Capital Market on February 1, 2011 under the symbol “USCR”.

 

Basis of Presentation

 

In connection with our emergence from Chapter 11, we applied the accounting under Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) Topic 852 (“ASC 852”), “Reorganizations,” as of August 31, 2010 (see Note 2 to our consolidated financial statements). The results for the four-month period ended December 31, 2010 (we refer to the Company during such period as the “Successor”) and the results for the eight-month period ended August 31, 2010 (we refer to the Company during such periods as the “Predecessor”) are presented separately. This presentation is required by generally accepted accounting principles in the United States (“GAAP”), as the Successor is considered to be a new entity for financial reporting purposes, and the results of the Successor reflect the application of fresh-start accounting. Accordingly, our financial statements after August 31, 2010 are not comparable to our financial statements for any period prior to our emergence from Chapter 11. In discussions regarding our operating results and cash flows, we have combined the successor and predecessor periods in instances where this will provide meaningful information.

 

In August 2010, we entered into a redemption agreement to redeem our 60% interest in our Michigan subsidiary, Superior Materials Holdings, LLC (“Superior”). This redemption was finalized and closed on September 30, 2010. The results of operations of Superior, net of the minority owner’s 40% interest, have been included in discontinued operations in our consolidated statements of operations for all periods presented.

Liquidity and Capital Resources

 

As a result of our emergence from Chapter 11 on August 31, 2010, our total debt has declined from $296.5 at December 31, 2009 to $53.2 million, net of a $13.0 discount, at December 31, 2010, thereby reducing our debt service costs and providing more liquidity. The discount was related to an embedded derivative in our Convertible Notes that was bifurcated and separately valued at issuance on the Effective Date. Our primary liquidity needs over the next 12 months consist of financing seasonal working capital requirements, servicing indebtedness under the Credit Agreement and Convertible Notes (defined and described below) and purchasing property and equipment. Our working capital needs are typically at their lowest level in the first quarter, increase in the second and third quarters to fund the increases in accounts receivable and inventories during those periods, and then decrease in the fourth quarter. The availability under the Credit Agreement was approximately $30.6 million at December 31, 2010 and $23.9 million at January 31, 2011. The decline is due to normal seasonality of our business due to weather and to unusual inclement weather during January in most of our markets. Even if we are unable to generate cash from operations over the next 12 months, we believe that our Credit Agreement provides adequate liquidity.

 

The projection of our cash needs is based upon many factors, including our forecasted volume, pricing, cost of materials and capital expenditures. Based on our projected cash needs, we believe that the Credit Agreement will provide us with sufficient liquidity in the ordinary course. The Credit Agreement is scheduled to mature in August 2014. If, however, the Credit Agreement is not adequate to fund our operations in the event that our operating results and projected needs are proven to be incorrect, we would need to obtain an amendment to the Credit Agreement or seek other debt financing to provide additional liquidity. As a result of the challenging and prolonged economic and industry conditions, we currently anticipate being approximately cash neutral for all of 2011. We continue to focus on minimizing our capital investment expenditures in order to maintain liquidity.

 

The principal factors that could adversely affect the amount of our internally generated funds include:

 

 

The following key financial measurements reflect our financial position and capital resources as of December 31, 2010, 2009 and 2008 (dollars in thousands):

 

 

Our cash and cash equivalents consist of highly liquid investments in deposits we hold at major financial institutions.

 

The following discussion provides a description of our arrangements relating to outstanding indebtedness.

 

Senior Secured Credit Facility due 2014

 

On the Effective Date of the Plan, we and certain of our subsidiaries entered into Credit Agreement, which provides for a $75.0 million asset-based Revolving Facility. The Credit Agreement matures in August 2014. As of December 31, 2010, we had outstanding borrowings of $8.0 million and $21.4 million of undrawn

standby letters of credit under the Revolving Facility. The availability under the Revolving Facility was approximately $30.6 million at December 31, 2010.

 

Up to $30.0 million of the Revolving Facility is available for the issuance of letters of credit, and any such issuance of letters of credit will reduce the amount available for loans under the Revolving Facility. Advances under the Revolving Facility are limited by a borrowing base of (a) 85% of the face amount of eligible accounts receivable plus (b) the lesser of (i) 85% of the net orderly liquidation value (as determined by the most recent appraisal) of eligible inventory and (ii) the sum of (A) 50% of the eligible inventory (other than eligible aggregates inventory) and (B) 65% of the eligible aggregates inventory plus (c) the lesser of (i) $15.0 million and (ii) the sum of (A) 85% of the net orderly liquidation value (as determined by the most recent appraisal) of eligible trucks plus (B) 80% of the cost of newly acquired eligible trucks since the date of the latest appraisal of eligible trucks minus (C) the depreciation amount applicable to eligible trucks since the date of the latest appraisal of eligible trucks minus (d) such reserves as the Administrative Agent may establish from time to time in its permitted discretion. The Administrative Agent may, in its permitted discretion, reduce the advance rates set forth above, adjust reserves or reduce one or more of the other elements used in computing the borrowing base. In addition, prior to the delivery of our financial statements for the fiscal quarter ended September 30, 2011, there will be an availability block of $15.0 million and after such date, unless the fixed charge coverage ratio for any trailing twelve month period is greater than or equal to 1.00:1.00, there will be an availability block of $15.0 million, to be increased monthly by $1.0 million up to a maximum of $20.0 million. Beginning with the fiscal month in which the availability block is eliminated and with respect to each fiscal month thereafter, at any time that availability under the Revolving Facility is less than $15.0 million, the Company must maintain a fixed charge coverage ratio of at least 1.00:1.00 until availability is greater than or equal to $15.0 million for a period of 30 consecutive days.

 

Under the Credit Agreement, our capital expenditures may not exceed (i) $15.0 million in the aggregate from the Effective Date (August 31, 2010) through and including December 31, 2010 and (ii) 7.0% of our consolidated annual revenue for the trailing twelve month period ending on the last day of each fiscal quarter thereafter (commencing with the fiscal quarter ended March 31, 2011); provided that the amount of any capital expenditures permitted to be made in respect of the trailing twelve month period ending on March 31, 2011 shall be increased by a maximum of $7.5 million of the unused amount of capital expenditures that were permitted to be made during the fiscal year ended December 31, 2010. Our capital expenditures from the Effective Date through December 31, 2010 were approximately $1.8 million. The Revolving Facility requires us to comply with certain other customary affirmative and negative covenants, and contains customary events of default.

 

At our option, loans may be maintained from time to time at an interest rate equal to the Eurodollar-based rate (“LIBOR”) or the applicable domestic rate (“CB Floating Rate”). The CB Floating Rate shall be the greater of (x) the interest rate per annum publicly announced from time to time by JPMorgan Chase Bank, N.A. as its prime rate and (y) the interest rate per annum equal to the sum of 1.0% per annum plus the adjusted LIBOR rate for a one month interest period, in each case plus the applicable margin. The applicable margin on loans is 2.75% in the case of loans bearing interest at the CB Floating Rate and 3.75% in the case of loans bearing interest at the LIBOR rate. Issued and outstanding letters of credit are subject to a fee equal to the applicable margin then in effect for LIBOR loans, a fronting fee equal to 0.20% per annum on the stated amount of such letter of credit, and customary charges associated with the issuance and administration of letters of credit. We will also pay a commitment fee on undrawn amounts under the Revolving Facility in an amount equal to 0.75% per annum. Upon any event of default, at the direction of the required lenders under the Revolving Facility, all outstanding loans and the amount of all other obligations owing under the Revolving Facility will bear interest at a rate per annum equal to 2.0% plus the rate otherwise applicable to such loans or other obligations.

 

Outstanding borrowings under the Revolving Facility are prepayable, and the commitments under the Revolving Facility may be permanently reduced, without penalty. There are mandatory prepayments of principal in connection with (i) the incurrence of certain indebtedness, (ii) certain equity issuances and (iii) certain asset sales or other dispositions (including as a result of casualty or condemnation). Mandatory

prepayments are applied to repay outstanding loans without a corresponding permanent reduction in commitments under the Revolving Facility and are subject to the terms of an Intercreditor Agreement.

 

In connection with the Credit Agreement, on the Effective Date we and certain of our subsidiaries entered into a Pledge and Security Agreement (the “Security Agreement”) with the Administrative Agent. Pursuant to the Security Agreement, all obligations under the Revolving Facility will be secured by (i) a first-priority perfected lien (subject to certain exceptions) in substantially all of our and certain of our subsidiaries present and after acquired inventory (including as-extracted collateral), accounts, certain specified mixer trucks, deposit accounts, securities accounts, commodities accounts, letter of credit rights, cash and cash equivalents, general intangibles (other than intellectual property and equity in subsidiaries), instruments, documents, supporting obligations and related books and records and all proceeds and products of the foregoing and (ii) a perfected second-priority lien (subject to certain exceptions) on substantially all other present and after acquired property (including, without limitation, material owned real estate).

 

Convertible Secured Notes due 2015

 

On the Effective Date of the Plan, we issued $55.0 million aggregate principal amount of the Convertible Notes pursuant to a subscription offering contemplated by the Plan. The Convertible Notes are governed by an indenture (the “Indenture”), dated as of August 31, 2010. Under the terms of the Indenture, the Convertible Notes bear interest at a rate of 9.5% per annum and will mature on August 31, 2015. Interest payments will be payable quarterly in cash in arrears. Additionally, we recorded a discount of approximately $13.6 million related to an embedded derivative that was bifurcated and separately valued (See Note 14 to the consolidated financial statements). This discount will be accreted over the term of the Convertible Notes and included in interest expense.

 

The Convertible Notes will be convertible, at the option of the holder, at any time on or prior to maturity, into shares of our new common stock (the “Common Stock”), at an initial conversion rate of 95.23809524 shares of Common Stock per $1,000 principal amount of Convertible Notes (the “Conversion Rate”). The Conversion Rate is subject to adjustment to prevent dilution resulting from stock splits, stock dividends, combinations or similar events. In connection with any such conversion, holders of the Convertible Notes to be converted shall also have the right to receive accrued and unpaid interest on such Convertible Notes to the date of conversion (the “Accrued Interest”). We may elect to pay the Accrued Interest in cash or in shares of Common Stock in accordance with the terms of the Indenture.

 

In addition, if a “Fundamental Change of Control” (as defined in the Indenture) occurs prior to the maturity date, in addition to any conversion rights the holders of Convertible Notes may have, each holder of Convertible Notes will have (i) a make-whole provision calculated as provided in the Indenture pursuant to which each holder may be entitled to additional shares of Common Stock upon conversion (the “Make Whole Premium”), and (ii) an amount equal to the interest on such Convertible Notes that would have been payable from the date of the occurrence of such Fundamental Change of Control (the “Fundamental Change of Control Date”) through the third anniversary of the Effective Date, plus any accrued and unpaid interest from the Effective Date to the Fundamental Change of Control Date (the amount in this clause (ii), the “Make Whole Payment”). We may elect to pay the Make Whole Payment in cash or in shares of Common Stock.

 

If the closing price of the Common Stock exceeds 150% of the Conversion Price (defined as $1,000 divided by the Conversion Rate) then in effect for at least 20 trading days during any consecutive 30-day trading period (the “Conversion Event”), we may provide, at our option, a written notice (the “Conversion Event Notice”) of the occurrence of the Conversion Event to each holder of Convertible Notes in accordance with the Indenture. Except as set forth in an Election Notice (as defined below), the right to convert Convertible Notes with respect to the occurrence of the Conversion Event shall terminate on the date that is 46 days following the date of the Conversion Event Notice (the “Conversion Termination Date”), such that the holder shall have a 45-day period in which to convert its Convertible Notes up to the amount of the Conversion Cap (as defined below). Any Convertible Notes not converted prior to the Conversion Termination Date, as a result of the Conversion Cap shall be, at the holder’s election and upon written notice to the Company (the “Election Notice”), converted into shares of Common Stock on a date or dates prior to the date

that is 180 days following the Conversion Termination Date, subject to the Conversion Cap. The “Conversion Cap” means the number of shares of Common Stock into which the Convertible Notes are convertible and that would cause the related holder to “beneficially own” (as such term is used in the Exchange Act) more than 9.9% of the Common Stock at any time outstanding.

 

Any Convertible Notes not otherwise converted prior to the Conversion Termination Date or specified for conversion in an Election Notice shall be redeemable, in whole or in part, at our election at any time prior to maturity at par plus accrued and unpaid interest thereon to the Conversion Termination Date.

 

The Indenture contains certain covenants that restrict our ability to, among other things,

 

 

The Convertible Notes are guaranteed by each of our existing and future direct or indirect domestic restricted subsidiaries. In connection with the Indenture, on August 31, 2010, we and certain of our subsidiaries entered into a Pledge and Security Agreement (the “Pledge and Security Agreement”) with the note holder collateral agent. Pursuant to the Pledge and Security Agreement, the Convertible Notes and related guarantees will be secured by first-priority liens on certain of the property and assets directly owned by the Company and each of the guarantors, including material owned real property, fixtures, intellectual property, capital stock of subsidiaries and certain equipment, subject to permitted liens (including a second-priority lien in favor of the Administrative Agent) with certain exceptions. Obligations under the Revolving Facility and those in respect of hedging and cash management obligations owed to the lenders (and their affiliates) that are a party to the Revolving Facility (collectively, the “Revolving Facility Obligations”) are secured by a second-priority lien on such collateral.

 

The Convertible Notes and related guarantees are also secured by a second-priority lien on the assets of the Company and the guarantors securing the Revolving Facility Obligations on a first-priority basis, including, inventory (including as extracted collateral), accounts, certain specified mixture trucks, general intangibles (other than collateral securing the Convertible Notes on a first-priority basis), instruments, documents, cash, deposit accounts, securities accounts, commodities accounts, letter of credit rights and all supporting obligations and related books and records and all proceeds and products of the foregoing, subject to permitted liens and certain exceptions.

 

Registration Rights Agreement

 

In connection with the issuance of the Convertible Notes, we entered into a registration rights agreement, dated August 31, 2010 (the “Registration Rights Agreement”), under which we agreed, pursuant to the terms and conditions set forth therein, to register the resale of Convertible Notes and the Common Stock into which the Convertible Notes convert. Under the Registration Rights Agreement, we are required to use commercially reasonable efforts to file a registration statement covering the resale by the Electing Holders (as defined in the Registration Rights Agreement) of Convertible Notes that are Registrable Securities (as defined in the Registration Rights Agreement) by the first business day following the date that is 366 days following the Effective Date, and were required to file a registration statement covering the resale of shares of Common Stock issued or issuable upon conversion of the Convertible Notes that constitute Registrable Securities by the Electing Holders, on a delayed or continuous basis, within 180 days of the Issue Date. We are required to pay special interest if we fail to file either registration statement by the applicable deadline or if any registration statement required by the Registration Rights Agreement ceases to be effective for more than 45 days, with

respect to any Registrable Securities that are Convertible Notes and are Restricted Securities (as defined in the Indenture).

 

DIP Credit Agreement and Prepetition Credit Facility

 

Effective as of May 3, 2010, we and certain of our subsidiaries entered into the DIP Credit Agreement which provided us with a debtor-in-possession term loan and revolving credit facility during Chapter 11. The DIP Credit Agreement was paid in full and cancelled on the Effective Date of the Plan. Our prepetition senior secured credit facility initially due 2011, was paid in full on May 3, 2010 with funds obtained under our DIP Credit Agreement and immediately terminated.

 

Old Notes

 

As discussed above, we reached an agreement with a substantial majority of the holders of the Old Notes on the terms of a comprehensive debt restructuring plan prior to April 30, 2010, the date an event of default would have occurred for non-payment of interest on the Old Notes. On the Effective Date, the Old Notes were cancelled and the holders received approximately 11.9 million shares of new common stock in our reorganized company.

 

Superior Credit Facility and Subordinated Debt

 

As discussed above, we redeemed our 60% interest in Superior in September 2010. As a result, the debt balance under Superior’s credit facility at December 31, 2010 was zero. The outstanding borrowings under the Superior credit facility at December 31, 2009 were $5.6 million. As a condition precedent to the initial advance under the Superior credit agreement, U.S. Concrete Inc. and Levy were required to fund $3.6 million to Superior in the form of cash equity contributions, representing a prefunding of the respective obligations under certain support letters entered into in connection with the previous Superior Credit Agreement for the period from January 1, 2010 through September 30, 2010. Our portion of this cash obligation was $1.1 million. Additionally, we made capital contributions in the amount of $2.6 million during the first quarter of 2010 in lieu of cash payment of related party payables by Superior. In the first quarter of 2009, we provided subordinated debt capital in the amount of $2.4 million in lieu of receiving cash payment of related party payables from Superior. This subordinated debt was eliminated when Superior was consolidated with U.S. Concrete. Additionally, the minority partner, Levy, provided $1.6 million of subordinated debt capital to fund operations during the first quarter of 2009. During the third quarter of 2009, U.S. Concrete and Levy converted the subordinated debt capital into capital contributions to Superior.

 

Fair Value of Financial Instruments

 

Our financial instruments consist of cash and cash equivalents, trade receivables, trade payables, long-term debt and derivative liabilities. We consider the carrying values of cash and cash equivalents, trade receivables and trade payables to be representative of their respective fair values because of their short-term maturities or expected settlement dates. The carrying value of outstanding amounts under our Revolving Facility approximates fair value due to the floating interest rate, and the fair value of our Convertible Notes was approximately $63.0 million, including the embedded derivative, at December 31, 2010. The fair value of the embedded derivative in our Convertible Notes that was bifurcated and separately valued was $12.5 million at December 31, 2010 and the fair value of issued warrants was $3.2 million at the same date. See Note 14 to our consolidated financial statements for further information regarding our derivative liabilities.

Cash Flow

 

The net cash provided by or used in our operating, investing and financing activities is presented below (in thousands):

 

 

Our net cash provided by operating activities generally reflects the cash effects of transactions and other events used in the determination of net income or loss. Net cash used in operating activities was $31.7 million for the year ended December 31, 2010, compared to net cash provided by operating activities of $8.0 million in 2009. The change in 2010 was primarily the result of lower profitability, lower interest payments and cash payments for professional fees related to our reorganization. During 2010, we made cash payments related to our reorganization of approximately $16.1 million. Interest payments were lower by approximately $20.7 million in 2010 compared to 2009 primarily due to the cancellation of our Old Notes. Additionally, in 2009, our working capital needs were lower due to the rapid decline in our volume of business as compared to 2010.

 

Net cash provided by operating activities decreased to $8.0 million for the year ended December 31, 2009 from $29.7 million for the year ended December 31, 2008. The change in 2009 was principally a result of lower profitability partially offset by the receipt of a federal tax refund of $4.9 million and lower working capital requirements.

 

We used $7.3 million of cash in investing activities in 2010 and used $9.0 million in 2009. The change during 2010 was primarily attributable to lower net capital expenditures and lower payments related to acquisitions in 2010 compared to 2009. We made payments of $0.7 million during 2010 related to the acquisition of three ready-mix plants in west Texas and paid $0.6 million related to the redemption of Superior. During 2009, we received $6.0 million in proceeds from the sale of some of our ready-mixed concrete plants in the Sacramento, California market and we paid approximately $4.5 million for a concrete crushing and recycling operation in New York. Additionally, in the first quarter of 2009, we made a $750,000 payment, reduced for certain uncollected pre-acquisition accounts receivable, to the sellers of a precast operation related to a contingent payment obligation.

 

Our net cash used in investing activities of $9.0 million for the year ended December 31, 2009 decreased $30.5 million from the net cash used in investing activities for the year ended December 31, 2008. The change during 2009 was primarily attributable to lower payments related to acquisitions, lower capital expenditures and higher proceeds from property, plant and equipment divestitures compared to 2008. During 2008, we received $7.6 million in proceeds from the sale of our Memphis operations and spent approximately $6.3 million for three ready-mixed concrete operations in New York, $13.5 million for certain ready-mixed concrete operations in west Texas and $2.5 for a precast operation in San Diego, California. We also paid $1.4 million of contingent purchase price consideration during 2008, related to real estate acquired in connection with the acquisition of a ready-mixed operation in 2003.

 

Our net cash provided by financing activities was $40.1 million in 2010 and used in financing activities was $0.1 million in 2009. The increase in 2010 was primarily the result of proceeds from our Convertible Notes obtained upon the Effective Date partially offset by financing costs. In addition, the Superior minority owner made a $2.5 million contribution to Superior in the first quarter of 2010 and we purchased $12.4 million principal amount of our Old Notes for $4.8 million during 2009. Our net cash used in financing activities of

$0.1 million in 2009 decreased from the net cash provided by financing activities of $0.3 million in 2008. While this change was negligible year over year, we purchased $12.4 million principal amount of the Old Notes for $4.8 million during 2009 and purchased shares under our previous common stock repurchase program for $6.6 million in 2008.

 

Off-Balance Sheet Arrangements

 

We do not currently have any off-balance sheet arrangements that have or are reasonably likely to have a material current or future effect on our financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources. From time to time, we may enter into noncancelable operating leases that would not be reflected on our balance sheet. For additional discussion on our operating leases, see Note 20 to our consolidated financial statements in this prospectus.

 

Quantitative and Qualitative Disclosures About Market Risk

 

We are exposed to certain risks relating to our ongoing business operations. However, derivative instruments are not used to hedge these risks. As of December 31, 2009, we were not a party to any derivative financial instruments. As of December 31, 2010, we are required to account for derivative instruments as a result of the issuance of warrants and Convertible Notes associated with our emergence from Chapter 11 (see Note 14 to the consolidated financial statements included in this prospectus). None of our derivatives manage business risk or are executed for speculative purposes.

 

All derivatives are required to be recorded on the balance sheet at their fair values. Each quarter, we determine the fair value of our derivative liabilities and changes result in income or loss. The key inputs in determining fair value of our derivative liabilities of $15.7 million at December 31, 2010 include our stock price, stock price volatility, risk free interest rates and interest rates for conventional debt of similarly situated companies. Changes in these inputs will impact the valuation of our derivatives and result in income or loss each quarterly period. A 5% increase in the stock price, volatility and risk free interest rates would increase the value of our warrant derivative liability by approximately $0.7 million, resulting in a loss in the same amount. A 5% increase in the stock price, volatility and conventional debt interest rates would increase the value of our embedded Convertible Notes derivative liability by approximately $2.1 million, resulting in a loss in the same amount. During the four month period ending December 31, 2010, we recorded income from fair value changes in our embedded Convertible Notes derivative of approximately $1.0 million due primarily to changes in the price of our common stock and market changes in conventional debt interest rates. Additionally, we recorded a loss from fair value changes in our warrants of approximately $0.1 million during the four month period ending December 31, 2010.

 

Borrowings under our Credit Agreement expose us to certain market risks. Interest on amounts drawn varies based on the floating rates under the agreement. Based on the $8.0 million outstanding under this facility as of December 31, 2010, a one percent change in the applicable rate would change our annual interest expense by $0.1 million.

 

Our operations are subject to factors affecting the overall strength of the U.S. economy and economic conditions impacting financial institutions, including the level of interest rates, availability of funds for construction, and the level of general construction activity. A significant decrease in the level of general construction activity in any of our market areas has and may continue to have a material adverse effect on our consolidated revenues and earnings.

Commitments

 

The following are our contractual commitments associated with our indebtedness and our lease obligations as of December 31, 2010 (in millions):

 

 

 

 

The following are our commercial commitment expirations as of December 31, 2010 (in millions):

 

 

The standby letters of credit and performance bonds have not been drawn upon as of December 31, 2010. The following long-term liabilities included on the consolidated balance sheet are excluded from the table above: accrued employment costs, income tax contingencies, insurance accruals and other accruals. Due to the nature of these accruals, the estimated timing of such payments (or contributions in the case of certain accrued employment costs) for these items is not predictable. As of December 31, 2010, the total unrecognized tax benefit related to uncertain tax positions was $8.0 million. It is possible that a reduction of $0.7 million may occur within the next 12 months.

 

Acquisitions and Divestitures

 

Superior Redemption

 

Certain of our subsidiaries (the “Joint Venture Partners”) and Edw. C. Levy Co. (“Levy”) were members of Superior and each held “Shares” of Superior, as defined in the Superior Operating Agreement, dated April 1, 2007 (the “Operating Agreement”). In August 2010, we entered into the Redemption Agreement (the “Redemption Agreement”) with the Joint Venture Partners, Superior and Levy, regarding the redemption of the Joint Venture Partners’ Shares by Superior (the “Redemption”). In September 2010, we entered into a Joinder Agreement to the Redemption Agreement with the Joint Venture Partners, Superior, Levy, VCNA Prairie, Inc. (the “New Joint Venture Partner”) and Votorantim Cement North America, Inc. (“VCNA”), whereby the New Joint Venture Partner and VCNA became parties to the Redemption Agreement. On September 30, 2010, the Company completed the disposition of its interest in Superior pursuant to the Redemption Agreement.

 

Pursuant to the Redemption Agreement, as consideration for the Redemption, Superior, Levy, the New Joint Venture Partner and VCNA (the “Indemnifying Parties”) agreed to indemnify us and the Joint Venture Partners from, among other items: (i) facts or circumstances that occur on or after the closing of the Redemption (the “Closing”) and which relate to the post-closing ownership or operation of Superior; (ii) the Agreement Approving Asset Sale with Central States, Southeast Areas Pension Fund, dated March 30, 2007; (iii) the Company’s obligation to provide retiree medical coverage to current and former Levy subsidiary employees of Superior and its affiliates pursuant to the collective bargaining agreement between Superior and the Teamster’s Local Union No. 614; and (iv) Superior’s issuance of 500 Shares to the New Joint Venture Partner.

At the closing of the Redemption on September 30, 2010, the Company and the Joint Venture Partners collectively paid $640,000 in cash and issued a $1.5 million promissory note (the “Promissory Note”) to Superior as partial consideration for the indemnification and other consideration provided by the Indemnifying Parties pursuant to the Redemption Agreement.

 

The Promissory Note does not bear interest and requires the Company and the Joint Venture Partners to pay Superior $750,000 on or before each of January 1, 2011 and January 1, 2012. The Promissory Note may be prepaid, in whole or in part, without premium, penalty or additional interest. We recognized a loss of approximately $11.8 million from redeeming our interest in Superior. We and the Joint Venture Partners have also agreed, for a period of five (5) years after the Closing not to compete with Superior in the State of Michigan, subject to certain exceptions.

 

Other

 

In October 2010, we acquired three ready-mix concrete plants in west Texas for approximately $3.0 million, plus a payment for certain inventory on hand at closing. In May 2009, we acquired substantially all the assets of a concrete crushing and recycling business in Queens, New York for approximately $4.5 million.

 

During the third quarter of 2009, we sold our ready-mixed concrete plants in the Sacramento California market for approximately $6.0 million, plus a payment for certain inventory on hand at closing. This sale resulted in a pre-tax loss of approximately $3.0 million after the allocation of approximately $3.0 million of goodwill related to these assets.

 

Critical Accounting Policies and Estimates

 

Preparation of our financial statements requires us to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenues and expenses. Note 4 to our consolidated financial statements included in this prospectus describes the significant accounting policies we use in preparing those statements. We believe the most complex and sensitive judgments, because of their significance to our financial statements, result primarily from the need to make estimates about the effects of matters that are inherently uncertain. The most significant areas involving our management’s judgments and estimates are described below. Actual results in these areas could differ from our estimates. Additionally, we implemented fresh start accounting as of August 31, 2010, the date of our emergence from Chapter 11. Refer to Note 1 and Note 2 to our consolidated financial statements included in this prospectus for more information.

 

Allowance for Doubtful Accounts

 

We extend credit to customers and other parties in the normal course of business. We regularly review outstanding receivables and provide for estimated losses on accounts receivable we believe we may not collect in full. A provision for bad debt expense recorded to selling, general and administrative expenses increases the allowance, and accounts receivable that we write off our books decrease the allowance. We determine the amount of bad debt expense we record each period and assess the resulting adequacy of the allowance at the end of each period by using a combination of our historical loss experience, customer-by-customer analyses of our accounts receivable balances each period and subjective assessments of our bad debt exposure.

 

Goodwill

 

We record as goodwill the amount by which the total purchase price we pay in our acquisition transactions exceeds our estimated fair value of the identifiable net assets we acquire. We test goodwill for impairment on an annual basis, or more often if events or circumstances indicate that there may be impairment. We generally test for goodwill impairment in the fourth quarter of each year, because this period gives us the best visibility of the reporting units’ operating performances for the current year (seasonally, April through October are highest revenue and production months) and outlook for the upcoming year, since much of our customer base is finalizing operating and capital budgets. The impairment test we use consists of comparing our estimates of the current fair values of our reporting units with their carrying amounts. We

currently have seven reporting units. Reporting units are organized based on our two product segments ((1) ready-mixed concrete and concrete related products and (2) precast concrete products) and geographic regions. We did not have a goodwill balance after the implementation of fresh start accounting on August 31, 2010. We acquired three ready-mix concrete plants during October 2010 which resulted in the recording of approximately $1.5 million of goodwill. We will test this goodwill for impairment during the fourth quarter of 2011 or sooner if events or circumstances indicate there may be an impairment.

 

There was no impairment of goodwill as a result of our fourth quarter 2009 test. During the third quarter of 2009, we sold some of our ready-mixed concrete plants in the Sacramento California market. These plants and operations were included in our northern California ready-mixed concrete reporting unit, and $3.0 million of goodwill was allocated to these assets and included in the calculation of loss on sale. Concurrently with this sale, we performed an impairment test on the remaining goodwill for this reporting unit and on all other reporting units with remaining goodwill as a result of current economic conditions. The U.S. economic downturn and resulting impact on the U.S. construction markets impacted our revenue and expected future growth. The cost of capital had increased while the availability of funds from capital markets had not improved significantly. Lack of available capital impacted our customers by creating project delays or cancellations, thereby impacting our revenue growth and assumptions. The downturn in residential construction had not improved, and we saw the economic downturn affect the commercial sector of our revenue base. In addition, the California budget crisis adversely affected public works spending in that market. All these factors led to a more negative outlook for expected future cash flows and during the third quarter 2009, resulting in an impairment charge of $45.8 million, of which $42.2 million related to our northern California reporting unit.

 

In 2008 we recorded an impairment charge of $135.3 million. The macro economic factors including the unprecedented and continuing credit crisis, the U.S. recession, the escalating unemployment rate and specifically the severe downturn in the U.S. construction markets, had a significant impact on the valuation metrics used in determining the long-term value of our reporting units. The slowdown in construction activity resulted in lower sales volumes and more competition for construction projects, thereby reducing expected future cash flows. These specific negative factors, combined with (i) lower enterprise values resulting from lower multiples of sales and EBITDA comparables, and (ii) the lack of recent third party transactions due to depressed macro economic conditions, resulted in the goodwill impairment expense for 2008.

 

Our fair value analysis is supported by a weighting of three generally accepted valuation approaches.

 

These valuation methods include the following:

 

 

These approaches include numerous assumptions with respect to future circumstances, such as industry and/or local market conditions that might directly impact each of the reporting units operations in the future, and are, therefore uncertain. These approaches are utilized to develop a range of fair values and a weighted average of these approaches is utilized to determine the best fair value estimate within that range.

 

Income Approach — Discounted Cash Flows.  This valuation approach derives a present value of the reporting unit’s projected future annual cash flows over the next 15 years and the present residual value of the reporting unit. We use a variety of underlying assumptions to estimate these future cash flows, including assumptions relating to future economic market conditions, product pricing, sales volumes, costs and expenses and capital expenditures. These assumptions vary by each reporting unit depending on regional market conditions, including competitive position, degree of vertical integration, supply and demand for raw materials and other industry conditions. The discount rate used in the Income Approach, specifically, the weighted average cost of capital, used in our analysis for 2009 and 2008 was 15.0% and 14.0%, respectively. Our

increased cost of capital assumption for 2009 and 2008 reflects the U.S. credit crisis which has negatively affected our ability to borrow cost effectively. The revenue compounded annual growth rates used in the Income Approach for 2009 and 2008 varied from -0.1% to 3.0%, depending on the reporting unit and the year. Our EBITDA margins derived from these underlying assumptions varied between approximately 3% to 22% for 2008, depending on the reporting unit. For 2009, our EBITDA margins varied between approximately -8% and 18%, depending on the reporting unit. The terminal growth rate used in each year was 3.0%.

 

Market Approach — Multiples of Sales and EBITDA.  This valuation approach utilizes publicly traded construction materials companies’ enterprise values, as compared to their recent sales and EBITDA information. For the fourth quarter 2009 impairment test, we used an average sales multiple of 0.62 times and an average EBITDA multiple of 8.14 times. For the third quarter 2009 impairment test, we used an average sales multiple of 0.60 times and an average EBITDA multiple of 6.79 times in determining this market approach metric. For 2008, we used an average sales multiple of 0.48 times and an average EBITDA multiple of 5.29 times. These multiples are used as a valuation metric to our most recent financial performance. We use sales as an indicator of demand for our products/services and EBITDA because it is a widely used key indicator of the cash generating capacity of construction material companies.

 

Market Approach — Comparisons of Recent Transactions.  This valuation approach uses publicly available information regarding recent third-party sales transactions in our industry to derive a valuation metric of the target’s respective enterprise values over their EBITDA amounts. For 2009 and 2008, we did not weigh this market approach because current economic conditions did not yield significant recent transactions to derive an appropriate valuation metric. We utilize this valuation metric with each of our reporting units’ most recent financial performance to derive a “what if” sales transaction comparable, fair-value estimate.

 

We selected these valuation approaches because we believe the combination of these approaches and our best judgment regarding underlying assumptions and estimates provides us with the best estimate of fair value for each of our reporting units. We believe these valuation approaches are proven valuation techniques and methodologies for the construction materials industry and widely accepted by investors. The estimated fair value of each reporting unit would change if our weighting assumptions under the three valuation approaches were materially modified. For the years ended December 31, 2009 and 2008, we weighted the Income Approach-Discounted Cash Flows 45% and the Market Approach Multiples of Sales and EBITDA 55%. No weighting was used in 2009 and 2008 for the Market Approach — comparison of Recent Transactions as described above.

 

Detailed below is a table of key underlying assumptions for all reporting units utilized in the fair value estimate calculation for the years ended December 31, 2009 and 2008.

 

 

See Note 5 to our consolidated financial statements included in this prospectus for additional information about our goodwill.

Insurance Programs

 

We maintain third-party insurance coverage in amounts and against the risks we believe are reasonable. We share the risk of loss with our insurance underwriters by maintaining high deductibles subject to aggregate annual loss limitations. We believe our workers’ compensation, automobile and general liability per occurrence retentions are consistent with industry practices, although there are variations among our business units. We fund these deductibles and record an expense for losses we expect under the programs. We determine the expected losses using a combination of our historical loss experience and subjective assessments of our future loss exposure. The estimated losses are subject to uncertainty from various sources, including changes in claims reporting and settlement patterns, judicial decisions, new legislation and economic conditions. Although we believe the estimated losses are reasonable, significant differences related to the items we have noted above could materially affect our insurance obligations and future expense. The amount accrued for self-insurance claims was $10.6 million as of December 31, 2010, compared to $12.8 million as of December 31, 2009, which is currently classified in accrued liabilities. The decrease in 2010 is primarily attributable to improved loss experience and to the redemption of Superior which occurred in September 2010.

 

Income Taxes

 

We use the liability method of accounting for income taxes. Under this method, we record deferred income taxes based on temporary differences between the financial reporting and tax bases of assets and liabilities and use enacted tax rates and laws that we expect will be in effect when we recover those assets or settle those liabilities, as the case may be, to measure those taxes. In cases where the expiration date of tax carryforwards or the projected operating results indicate that realization is not likely, we provide for a valuation allowance.

 

We have deferred tax assets, resulting from deductible temporary differences that may reduce taxable income in future periods. A valuation allowance is required when it is more likely than not that all or a portion of a deferred tax asset will not be realized. In assessing the need for a valuation allowance, we estimate future taxable income, considering the feasibility of ongoing tax-planning strategies and the realizability of tax loss carryforwards. Valuation allowances related to deferred tax assets can be impacted by changes in tax laws, changes in statutory tax rates and future taxable income levels. If we were to determine that we would not be able to realize all or a portion of our deferred tax assets in the future, we would reduce such amounts through a charge to income in the period in which that determination is made. Conversely, if we were to determine that we would be able to realize our deferred tax assets in the future in excess of the net carrying amounts, we would decrease the recorded valuation allowance through an increase to income in the period in which that determination is made. Based on the assessment, we recorded a valuation allowance of $36.5 million at December 31, 2010 and $18.1 million at December 31, 2009. In determining the valuation allowance in 2010 and 2009, we used such factors as (i) cumulative federal taxable losses, (ii) the amount of deferred tax liabilities that we generally expect to reverse in the same period and jurisdiction that are of the same character as the temporary differences giving rise to our deferred tax assets and (iii) certain tax contingencies under authoritative accounting guidance related to accounting for uncertainty in income taxes which, should they materialize, would be offset by our net operating loss generated in 2008 through 2010. We provided a valuation allowance in 2010 and 2009 related to certain federal and state income tax attributes we did not believe we could utilize within the tax carryforward periods.

 

In the ordinary course of business there is inherent uncertainty in quantifying our income tax positions. We assess our income tax positions and record tax benefits for all years subject to examination based upon management’s evaluation of the facts, circumstances and information available at the reporting date. For those tax positions where it is more likely than not that a tax benefit will be sustained, we have recorded the highest amount of tax benefit with a greater than 50% likelihood of being realized upon ultimate settlement with a taxing authority that has full knowledge of all relevant information. For those income tax positions where it is not more likely than not that a tax benefit will be sustained, no tax benefit has been recognized in the financial statements. See Notes 4 and 17 to the consolidated financial statements for further discussion.

Inventory

 

Inventories are stated at the lower of cost or fair market value. We reduce the carrying value of our inventories for estimated excess and obsolete inventories equal to the difference between the cost of inventory and its estimated realizable value based upon assumptions about future product demand and market conditions. Once the new cost basis is established, the value is not increased with any changes in circumstances that would indicate an increase after the remeasurement. If actual product demand or market conditions are less favorable than those projected by management, additional inventory write-downs may be required that could result in a material change to our consolidated results of operations or financial position.

 

Property, Plant and Equipment, Net

 

We state our property, plant and equipment at cost and use the straight-line method to compute depreciation of these assets over their estimated remaining useful lives. Our estimates of those lives may be affected by such factors as changing market conditions, technological advances in our industry or changes in applicable regulations.

 

We evaluate the recoverability of our property, plant and equipment when changes in circumstances indicate that the carrying amount of the asset may not be recoverable in accordance with authoritative accounting guidance related to the impairment or disposal of long-lived assets. We compare the carrying values of long-lived assets to our projection of future undiscounted cash flows attributable to those assets. If the carrying value of a long-lived asset exceeds the future undiscounted cash flows we project to be derived from that asset, we record an impairment loss equal to the excess of the carrying value over the fair value. Actual useful lives and future cash flows could be different from those we estimate. These differences could have a material effect on our future operating results.

 

Other

 

We record accruals for legal and other contingencies when estimated future expenditures associated with those contingencies become probable and the amounts can be reasonably estimated. However, new information may become available, or circumstances (such as applicable laws and regulations) may change, thereby resulting in an increase or decrease in the amount required to be accrued for such matters (and, therefore, a decrease or increase in reported net income in the period of such change).

 

Recent Accounting Pronouncements

 

For a discussion of recently adopted accounting standards, see Note 4 to our consolidated financial statements included in this prospectus.

Results of Operations

 

The following table sets forth selected historical statement of operations information and that information as a percentage of total revenue for the years indicated.

 

Year Ended December 31, 2010 Compared to Year Ended December 31, 2009

 

Revenue

 

Ready-mixed concrete and concrete-related products.  Revenue from our ready-mixed concrete and concrete-related products segment decreased $29.1 million, or 6.6%, from $442.7 million in 2009 to $413.6 million in 2010. Our ready-mixed sales volume for 2010 was approximately 3.8 million cubic yards, down 3.6% from the 3.9 million cubic yards of concrete we sold in 2009. The decline reflected the continuing downturn in residential home construction activity that began in the second half of 2006 in all our major markets and the downturn in commercial construction and public works spending due to the ongoing economic downturn in the United States. In addition to the effects of lower sales volumes, was the approximate 4.0% decrease in the ready-mix average sales price per cubic yard of ready-mixed concrete during 2010, as compared to 2009.

 

Precast concrete products.  Revenue from our precast concrete products segment was down $1.0 million, or 1.7%, from $57.0 million in 2009 to $56.0 million in 2010. This decrease reflected the continued downturn primarily in residential and commercial construction in our San Diego, California market and lower commercial construction activity in our mid-Atlantic market.

 

Cost of goods sold before depreciation, depletion and amortization

 

Ready-mixed concrete and concrete-related products.  Cost of goods sold before depreciation, depletion and amortization for our ready-mixed concrete and concrete-related products segment decreased $20.7 million, or 5.7%, from $364.9 million in 2009 to $344.2 million in 2010. As a percentage of ready-mixed concrete and concrete-related product revenue, cost of goods sold before depreciation, depletion and amortization was 83.2% in 2010, as compared to 82.4% in 2009. The increase in cost of goods sold as a percentage of ready-mixed concrete and concrete-related products revenue was primarily attributable to fixed costs being spread over lower volumes and higher per unit delivery and plant costs due to repairs and maintenance, as compared to 2009.

 

Precast concrete products.  The increase in cost of goods sold before depreciation, depletion and amortization for our precast concrete products segment of $3.1 million, or 6.7%, to $48.6 million in 2010 from $45.5 million in 2009, was primarily related to the mix of projects compared to 2009 in our Phoenix, Arizona and San Diego, California precast markets. As a percentage of precast concrete revenue, cost of goods sold before depreciation, depletion and amortization for precast concrete products rose from 79.9% in 2009 to 86.7% in 2010, reflecting decreased efficiency in our plant operations in San Diego, California, Phoenix, Arizona and in our mid-Atlantic markets, resulting from lower margin projects.

 

Goodwill and other asset impairments.  The Company performed an impairment test on goodwill and recorded an impairment charge of $45.8 million in 2009 related to our northern California and Atlantic Region reporting units. Additionally, we had an asset impairment charge of $1.6 million on assets that were 100% owned in the Michigan market. There were no goodwill or asset impairment charges recorded during 2010.

 

Selling, general and administrative expenses.  Selling, general and administrative expenses were $58.8 million in 2010, compared to $60.1 million in 2009. Excluding approximately $7.8 million in reorganization related costs incurred before our filing for Chapter 11 and after our emergence from Chapter 11, adjusted SG&A expenses were $51.0 million in 2010. The $9.1 million, or 15.2 percent, reduction in SG&A expense is the result of cost control measures implemented in 2009 and 2010, including reduced compensation as a result of workforce reductions, lower equity-based compensation expense and other administrative cost reductions.

 

Loss on sale of assets.  Our loss on sale of assets decreased to $0.1 million in 2010, compared to a loss of $2.4 million in 2009. The loss in 2009 was primarily attributable to a $3.0 million loss, after the allocation of $3.0 million of related goodwill, on the sale of certain ready-mixed concrete plants in our California market for $6.0 million.

Depreciation, depletion and amortization.  Depreciation, depletion and amortization expense for 2010 decreased $2.6 million to $23.7 million, as compared to $26.3 million for 2009, primarily due to lower asset valuations after the application of fresh-start accounting on August 31, 2010.

 

Interest expense, net.  Net interest expense for 2010 was down approximately $5.1 million to $20.8 million, compared to $25.9 million for 2009. The decrease is due primarily to the cancellation of Old Notes in accordance with the consummation of the Plan of Reorganization on August 31, 2010 and the cessation of recording interest expense on these notes after filing for Chapter 11 on April 29, 2010. This decrease is partially offset by interest incurred from May 2010 through August 2010 under the debtor-in-possession credit facility which was paid in full and cancelled on August 31, 2010 upon consummation of the Plan. Additionally, the Company incurred interest from September 2010 through December 2010 on borrowings under the Revolving Facility and the Convertible Notes.

 

Gain on purchases of senior subordinated notes.  During the first and second quarters of 2009, we purchased $12.4 million aggregate principal amount of the Old Notes in open-market transactions for approximately $4.8 million. This resulted in a gain of approximately $7.4 million after writing off a total of $0.2 million of previously deferred financing costs associated with the pro-rata amount of the Old Notes purchased. There was no gain recorded during 2010.

 

Derivative income.  During the four month period ended December 31, 2010, we recorded income of approximately $1.0 million related to fair value changes in our embedded Convertible Notes derivative and warrants. This fair value change was due primarily to changes in the price of our common stock and market changes in conventional debt interest rates.

 

Reorganization items.  Reorganization items net gain of $59.2 million during 2010 consisted of a $151.9 million gain on the cancellation of our Old Notes, partially offset by a $79.0 million loss on asset valuations resulting from fresh start accounting and $13.7 million of professional fees and other reorganization costs.

 

Income tax provision (benefit).  We recorded income tax expense allocated to continuing operations equal to approximately $1.6 million for the eight month period ended August 31, 2010. We recorded an income tax benefit of $0.9 million for the four month period ended December 31, 2010 and an income tax benefit of $0.3 million for the year ended December 31, 2009. Our effective tax rate differs substantially from the federal statutory rate primarily due to the application of a valuation allowance that reduced the recognized benefit of our deferred tax assets. In addition, certain state income taxes are calculated on bases different than pre-tax income (loss). This resulted in recording income tax expense in certain states that experience a pre-tax loss.

 

In accordance with GAAP, the recognized value of deferred tax assets must be reduced to the amount that is more likely than not to be realized in future periods. The ultimate realization of the benefit of deferred tax assets from deductible temporary differences or tax carryovers depends on the generation of sufficient taxable income during the periods in which those temporary differences become deductible. We considered the scheduled reversal of deferred tax liabilities, projected future taxable income, and tax planning strategies in making this assessment. Based on these considerations, we relied upon the reversal of certain deferred tax liabilities to realize a portion of our deferred tax assets and established a valuation allowance as of August 31, 2010, December 31, 2010 and December 31, 2009 for other deferred tax assets because of uncertainty regarding their ultimate realization. Our total net deferred tax liability as of August 31, 2010, December 31, 2010 and December 31, 2009 was $0.8 million, $0.7 million and $1.8 million, respectively.

 

We reorganized pursuant to Chapter 11 of the Bankruptcy Code under the terms of our Plan with an effective date of August 31, 2010 (See Note 1). Under our Plan, our Old Notes were cancelled, giving rise to cancellation of indebtedness income (“CODI”). The Internal Revenue Code (“IRC”) provides that CODI arising under a plan of bankruptcy reorganization is excludible from taxable income, but the debtor must reduce certain of its tax attributes by the amount of CODI realized under the Plan. Based on the estimate of CODI and required tax attribute reduction, we believe the effects of the Plan will not cause a significant change in our recorded deferred tax liability. Our required reduction in tax attributes, or deferred tax assets, will be accompanied by a corresponding release of valuation allowance that is currently reducing the carrying value of such tax attributes. The allocation of the tax attribute reduction is an estimate and will not be

finalized until the 2010 tax return, which includes the effective date of the Plan, is filed. Any changes in the estimate could impact deferred taxes.

 

We underwent a change in ownership for purposes of Section 382 of the IRC as a result of our Plan and emergence from Chapter 11 on August 31, 2010. As a result, the amount of our pre-change net operating losses (“NOLs”) and other tax attributes that are available to offset future taxable income are subject to an annual limitation. The annual limitation is based on the value of the corporation as of the effective date of the Plan. The ownership change and the resulting annual limitation on use of NOLs are not expected to result in the expiration of our NOL carryforwards if we are able to generate sufficient future taxable income within the carryforward periods. However, the limitation on the amount of NOL available to offset taxable income in a specific year may result in the payment of income taxes before all NOLs have been utilized. Additionally, a subsequent ownership change may result in further limitation on the ability to utilize existing NOLs and other tax attributes.

 

Loss from discontinued operations.  In August 2010, the Company entered into a redemption agreement to exit the Michigan market with the divestiture of its interest in Superior. This divestiture closed in September 2010. In connection with the divestiture of Superior, we paid $640,000 in cash and issued the Promissory Note which requires that we pay Superior $750,000 on or before each of January 1, 2011 and January 1, 2012 in return for a release of certain liabilities and obligations and indemnification related to contingent underfunded pension liabilities. The $11.8 million loss related to the Redemption and results of operations of Superior have been included as discontinued operations for all periods presented. The allocable share of net loss of Superior to the minority interest owner (non-controlling interest), has also been reflected in discontinued operations for all periods presented.

 

Year Ended December 31, 2009 Compared to Year Ended December 31, 2008

 

Revenue.

 

Ready-mixed concrete and concrete-related products.  Revenue from our ready-mixed concrete and concrete-related products segment decreased $191.0 million, or 30.1%, from $633.7 million in 2008 to $442.7 million in 2009. Our ready-mixed sales volume for 2009 was approximately 3.9 million cubic yards, down 30.4% from the 5.7 million cubic yards of concrete we sold in 2008. The decline reflected the continuing downturn in residential home construction activity that began in the second half of 2006 in all our major markets and the downturn in commercial construction and public works spending due to the ongoing economic downturn in the United States.

 

Precast concrete products.  Revenue from our precast concrete products segment was down $11.1 million, or 16.3%, from $68.1 million in 2008 to $57.0 million in 2009. This decrease reflected the continued downturn primarily in residential construction in our northern California and Phoenix, Arizona markets and lower commercial construction activity in our mid-Atlantic market. The decrease in revenue was partially offset by higher revenue in 2009 from the acquisition of our assets of a San Diego, California precast operation in August 2008.

 

Cost of goods sold before depreciation, depletion and amortization.

 

Ready-mixed concrete and concrete-related products.  Cost of goods sold before depreciation, depletion and amortization for our ready-mixed concrete and concrete-related products segment decreased $154.2 million, or 29.7%, from $519.1 million in 2008 to $364.9 million in 2009. These decreases were primarily associated with lower sales volumes in 2009. As a percentage of ready-mixed concrete and concrete-related product revenue, cost of goods sold before depreciation, depletion and amortization was 82.4% in 2009, as compared to 81.9% in 2008. The increase in cost of goods sold as a percentage of ready-mixed concrete and concrete-related products revenue was primarily attributable to the effect of our fixed costs being spread over lower volumes and to higher per unit delivery costs, as compared to 2008.

 

Precast concrete products.  The reduction in cost of goods sold before depreciation, depletion and amortization for our precast concrete products segment of $7.8 million, or 14.7%, from $53.4 million in 2008 to $45.5 million in 2009, was primarily related to the declining residential construction market that has been impacting our northern California and Phoenix, Arizona precast markets. As a percentage of precast concrete revenue, cost of goods sold before depreciation, depletion and amortization for precast concrete products rose from 78.4% in 2008 to 79.9% in 2009, reflecting decreased efficiency in our plant operations in California and Phoenix, Arizona, resulting from lower demand for our primarily residential product offerings in these markets.

 

Goodwill and other asset impairments.  During the third quarter of 2009, we recorded a goodwill impairment charge of $45.8 million related to our northern California and Atlantic Region reporting units. During the fourth quarter of 2008, we recorded a goodwill impairment charge of $135.3 million related to five of our reporting units. See “Critical Accounting Policies” above for more information concerning these impairments.

 

Selling, general and administrative expenses.  Selling, general and administrative expenses were $60.1 million in 2009, compared to $72.9 million in 2008. This decrease was primarily due to reduced compensation as a result of workforce reductions in 2008 and 2009, lower incentive compensation accruals, lower litigation accruals and other administrative cost reductions such as in travel and entertainment costs and office expenses. This was partially offset by an increase in our bad debt provision when compared to 2008.

 

Loss on sale of assets.  Our loss on sale of assets increased to $2.4 million in 2009, compared to a loss of $0.8 million in 2008. We completed the sale of our ready-mixed concrete plants in the Sacramento, California market for $6.0 million, plus payment for inventory on hand at closing, during the third quarter of 2009. This sale resulted in a $3.0 million loss after the allocation of $3.0 million of related goodwill.

Depreciation, depletion and amortization.  Depreciation, depletion and amortization expense increased $0.9 million, or 3.5%, from $25.4 million in 2008 to $26.3 million in 2009. The increase was attributable primarily to higher depreciation expense related to our new information system technology system, which was placed in service during 2008.

 

Interest expense, net.  Net interest expense for 2009 was down approximately $0.5 million to $26.0 million, compared to $26.5 million for 2008. This change was primarily due to the interest savings from the repurchase of some of the Old Notes and lower interest rates on borrowings under the Predecessor revolving credit agreement when compared to 2008. This was mostly offset by increased interest associated with higher amounts outstanding under the Predecessor revolving credit agreement.

 

Gain on purchases of senior subordinated notes.  During the first and second quarters of 2009, we purchased $12.4 million aggregate principal amount of the Old Notes in open-market transactions for approximately $4.8 million. This resulted in a gain of approximately $7.4 million after writing off a total of $0.2 million of previously deferred financing costs associated with the pro-rata amount of the Old Notes purchased.

 

Income tax provision (benefit).  We recorded an income tax benefit from continuing operations of $0.3 million for the full year 2009, as compared to $18.0 million in 2008. Our effective tax benefit rate was 0.4% for 2009 and 12.3% in 2008. For 2009, we applied a valuation allowance against certain of our deferred tax assets, including net operating loss carryforwards, which reduced the effective benefit rate from the expected statutory rate. In accordance with authoritative accounting guidance, a valuation allowance is required unless it is more likely than not that future taxable income or the reversal of deferred tax liabilities will be sufficient to recover deferred tax assets. In addition, certain state taxes are calculated on bases different than pre-tax loss. This resulted in us recording income tax expense for these states, which also lowered the effective benefit rate in 2009 compared to the statutory rate.

 

Loss from discontinued operations.  In August 2010, the Company entered into the Redemption Agreement to exit the Michigan market with the divestiture of its interest in Superior. This divestiture closed in September 2010. The results of operations of Superior have been included as discontinued operations for all periods presented. The allocable share of net loss of Superior to the minority interest owner (non-controlling interest), has also been reflected in discontinued operations for all periods presented. In 2009, we reported a loss of $9.9 million, net of income taxes, in discontinued operations. In 2008, the discontinued operations generated a loss of approximately $4.0 million, net of income taxes, which is primarily related to our disposition in Superior.

 

Inflation

 

We experienced minimal increases in operating costs during 2010 related to inflation. However, in non-recessionary conditions cement prices and certain other raw material prices, including aggregates and diesel fuel prices, have generally risen faster than regional inflationary rates. When these price increases have occurred, we have been able to partially mitigate our cost increases with price increases we obtained for our products.

 

General

 

We are a major producer of ready-mixed concrete, precast concrete products and concrete-related products in select markets in the United States. We operate our business through our ready-mixed concrete and concrete-related products segment and our precast products concrete segment. We are a leading producer of ready-mixed concrete or precast concrete products in substantially all the markets in which we have operations. Ready-mixed and precast concrete products are important building materials that are used in a vast majority of commercial, residential and public works construction projects.

 

All of our operations are in (and all of our sales are made within) the United States. We operate principally in Texas, California and New Jersey/New York, with those markets representing approximately 36%, 25%, and 19%, respectively, of our consolidated revenues from continuing operations for the year ended December 31, 2010. According to publicly available industry information, those states represented an aggregate of 28% of the consumption of ready-mixed concrete in the United States in 2010 (Texas, 13.1%; California, 9.3%; and New Jersey/New York, 5.4%). Our consolidated revenues from continuing operations for the year ended December 31, 2010 were $455.7 million, of which we derived approximately 87.7% from our ready-mixed concrete and concrete-related products segment and 12.3% from our precast concrete products segment. For more information on our consolidated revenues and results of operations for the years ended December 31, 2010, 2009 and 2008 and our consolidated total assets as of December 31, 2010 and 2009, see our consolidated financial statements included in this prospectus.

 

As of March 29, 2011, we had 102 fixed and 11 portable ready-mixed concrete plants, seven precast concrete plants and seven aggregates facilities. During 2010, these plants and facilities produced approximately 3.8 million cubic yards of ready-mixed concrete and 3.1 million tons of aggregates. We lease two of the seven aggregates facilities to third parties and retain a royalty on production from those facilities.

 

Our ready-mixed concrete and concrete-related products segment engages principally in the formulation, preparation and delivery of ready-mixed concrete to the job sites of our customers. We also provide services intended to reduce our customers’ overall construction costs by lowering the installed, or “in-place,” cost of concrete. These services include the formulation of mixtures for specific design uses, on-site and lab-based product quality control, and customized delivery programs to meet our customers’ needs. Our marketing efforts primarily target concrete sub-contractors, general contractors, governmental agencies, property owners and developers and home builders whose focus extends beyond the price of ready-mixed concrete to product quality, on-time delivery and reduction of in-place costs. We generally do not provide paving or other finishing services, which construction contractors or subcontractors typically perform. To a lesser extent, this segment is also engaged in the mining and sale of aggregates and the resale of building materials, primarily to our ready-mixed concrete customers. These businesses are generally complementary to our ready-mixed concrete operations and provide us opportunities to cross-sell various products in markets where we sell both ready-mixed concrete and concrete-related products. We provide our ready-mixed concrete and concrete-related products from our continuing operations in north and west Texas, northern California, New Jersey, New York, Washington, D.C. and Oklahoma.

 

Our precast concrete products segment produces precast concrete products at seven plants in three states, with five plants in California, one in Arizona and one in Pennsylvania. Our customers choose precast technology for a variety of architectural applications, including free-standing walls used for landscaping, soundproofing and security walls, panels used to clad a building façade and storm water drainage. Our operations also specialize in a variety of finished products, among which are utility vaults, manholes, catch basins, highway barriers, curb inlets, pre-stressed bridge girders, concrete piles and custom-designed architectural products.

 

In August 2010, we entered into a redemption agreement to redeem our 60% interest in our Michigan subsidiary, Superior Materials Holdings, LLC (“Superior”). This redemption was finalized and closed on September 30, 2010. The results of operations of Superior, net of the minority owner’s 40% interest, have been included in discontinued operations in our consolidated statements of operations for all periods presented.

 

For financial information regarding our reporting segments, including revenue and operating income (loss) for the four month period ended December 31, 2010, the eight month period ended August 31, 2010, and the years ended December 31, 2009 and 2008, see Note 18 to our consolidated financial statements included in this prospectus.

 

U.S. Concrete, Inc. is a Delaware corporation which was incorporated in 1997. We began operations in 1999, which is the year we completed our initial public offering.

 

Market Trends and Restructuring

 

Since the middle of 2006, the United States building materials construction market has been challenging. Currently, the construction industry, particularly the ready-mixed concrete industry, is characterized by significant overcapacity and fierce competitive activity. However, the fourth quarter of 2010 showed what we believe are positive signs with a 3.3% increase in revenue from continuing operations and an 8.6% increase in ready-mix concrete sales volume compared to the fourth quarter of 2009. The year-over-year volume increase is the first since the third quarter of 2007. While our average sales prices declined approximately 1.5% in the fourth quarter of 2010 compared to the same period in 2009, the decline was relatively modest.

 

From 2007 through 2010, we implemented a variety of cost reduction initiatives, including workforce reductions, suspension of certain employee benefits, temporary plant idling, rolling stock dispositions and divestitures of underperforming business units to reduce our operating and fixed costs. Despite these initiatives, our business and financial performance was severely affected by the overall downturn in construction activity, particularly the steep decline in single-family home starts in the U.S. residential construction markets, the previous turmoil in the global credit markets and the U.S. economic downturn. These conditions have had a significant impact on demand for our products since the middle of 2006 and continuing through 2010. During 2007, 2008 and 2009, single family home starts declined significantly, and commercial construction activity, which has been negatively affected by the recent U.S. economic downturn, was weaker in our markets in 2010 when compared to 2009. Sales volumes in our precast operations have also been significantly affected due to the dramatic downturn in residential construction. We have also experienced pricing pressure and our ready-mixed concrete pricing declined in 2010 compared to 2009 in most of our markets, which negatively impacted our gross margins.

 

The continued weakening economic conditions, including ongoing softness in residential construction, further reduction in demand in the commercial sector and delays in anticipated public works projects in many of our markets, combined to cause a significant reduction in our liquidity during 2010. We retained legal and financial advisors to assist us in reviewing the strategic and financing alternatives available to us. We also engaged in discussions with the holders of our Old Notes regarding a permanent restructuring of our capital structure.

 

Chapter 11 Bankruptcy and Emergence

 

We reached an agreement with a substantial majority of the holders of our Old Notes on the terms of a comprehensive debt restructuring plan in April, 2010. To implement the restructuring, on the Petition Date, the Debtors filed voluntary petitions in the Bankruptcy Court seeking relief under the Bankruptcy Code. The Bankruptcy Court ordered joint administration of the Chapter 11 Cases.

 

On July 29, 2010, the Bankruptcy Court entered an order confirming the Plan. On the Effective Date, the Debtors consummated their reorganization under the Bankruptcy Code and the Plan became effective.

 

The consummation, on the Effective Date, of our reorganization under the Plan provided for the following:

 

 

 

Our Old Common Stock ceased trading on the NASDAQ Global Market on May 10, 2010 and was traded in the over-the-counter market until the Effective Date. Upon the Effective Date of the Plan, the Old Common Stock was cancelled and holders of the Old Common Stock received Class A Warrants and Class B Warrants. The common stock issued to holders of the Old Notes on the Effective Date began trading on the OTC Bulletin Board on October 15, 2010 under the symbol “USCR” and began trading on the NASDAQ Capital Market on February 1, 2011 under the symbol “USCR”.

 

Industry Overview

 

General

 

Ready-mixed concrete is a highly versatile construction material that results from combining coarse and fine aggregates, such as gravel, crushed stone and sand, with water, various chemical admixtures and cement. We manufacture ready-mixed concrete in thousands of variations, which in each instance may reflect a specific design use. We generally maintain only a few days’ inventory of raw materials and coordinate our daily materials purchases with the time-sensitive delivery requirements of our customers.

 

The quality of ready-mixed concrete is time-sensitive as it becomes difficult to place within 90 minutes after mixing. Consequently, the market for a permanently installed ready-mixed concrete plant is usually limited to an area within a 25-mile radius of such plant’s location. We produce ready-mixed concrete in batches at our plants and use mixer and other trucks to distribute and deliver the concrete to the job sites of our customers.

 

Ready-mixed concrete is poured-in-place in forms at a construction site and cured on site. In contrast, our precast concrete products are made with ready-mixed concrete (its primary raw material), but are cast in reusable molds or “forms” and cured in a controlled environment at our plant, then either placed in inventory or transported to the construction site. The advantages of using precast concrete products include the higher quality of the material, when formed in controlled conditions, and the reduced cost of reusable forms as compared to the cost of constructing large forms used with ready-mixed concrete placed at the construction site.

Concrete has many attributes that make it a highly versatile construction material. In recent years, industry participants have developed various uses for concrete products, including:

 

 

Other examples of successful innovations that have opened new markets for concrete include:

 

 

We generally obtain contracts through local sales and marketing efforts directed at concrete sub-contractors, general contractors, property owners and developers, governmental agencies and home builders. In many cases, local relationships are very important.

 

Based on information from the National Ready-Mixed Concrete Association (“NRMCA”) and the National Precast Concrete Association (“NPCA”), we estimate that, in addition to vertically integrated manufacturers of cement and aggregates, over 2,200 independent ready-mixed concrete producers currently operate approximately 5,000 plants in the United States and 3,200 precast concrete products manufacturers operate in the United States and Canada. Larger markets generally have several producers competing for business on the basis of product quality, service, on-time delivery and price.

 

Annual usage of ready-mixed concrete in the United States dropped significantly in 2010, 2009 and 2008 from its “near record” 2006 level. According to information available from the NRMCA, total volume (measured in cubic yards) from the production and delivery of ready-mixed concrete in the United States over the past three years were as follows (in millions):

 

 

Ready-mixed concrete and precast concrete products have historically benefited from relatively stable demand and pricing. However, pricing of our products is primarily driven by the cost of raw materials (cement, aggregates, etc.), cost of labor and competition in our local markets. From 2006 through most of 2007, raw materials cost and ready-mixed concrete products average selling prices increased. For 2008, 2009 and 2010, pricing of our raw materials, particularly cement, and our ready-mixed pricing has been put under competitive pressure due to product demand declines resulting from the slowdown in construction activity in all of our markets, especially in the residential construction sector.

According to recently published McGraw-Hill Construction data, the four major segments of the construction industry accounted for the following approximate percentages of the total volume of ready-mixed concrete produced in the United States in 2010, 2009 and 2008:

 

 

Barriers to the start-up of new ready-mixed concrete and precast concrete products manufacturing operations have been increasing. During the past decade, public concerns about dust, process water runoff, noise and heavy mixer and other truck traffic associated with the operation of these types of plants and their general appearance have made obtaining the permits and licenses required for new plants more difficult. Delays in the regulatory process, coupled with the capital investment that start-up operations entail, have raised the barriers to entry for those operations.

 

For a discussion of the general seasonality of the construction industry, see “Risk Factors — Risks Associated With Our Business — Our operating results may vary significantly from one reporting period to another and may be adversely affected by the seasonal and cyclical nature of the markets we serve” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations”.

 

Products and Services

 

Ready-Mixed Concrete and Concrete-Related Products Segment

 

Ready-Mixed Concrete.  Our ready-mixed concrete products consist of proportioned mixes we prepare and deliver in an unhardened plastic state for placement and shaping into designed forms at the job site. Selecting the optimum mix for a job entails determining not only the ingredients that will produce the desired permeability, strength, appearance and other properties of the concrete after it has hardened and cured, but also the ingredients necessary to achieve a workable consistency considering the weather and other conditions at the job site. We believe we can achieve product differentiation for the mixes we offer because of the variety of mixes we can produce, our volume production capacity and our scheduling, delivery and placement reliability. Additionally, we believe our environmentally friendly concrete (EF Technology^®) initiative, which utilizes alternative materials and mix designs that result in lower CO₂ emissions, helps differentiate us from our competitors. We also believe we distinguish ourselves with our value-added service approach that emphasizes reducing our customers’ overall construction costs by reducing the in-place cost of concrete and the time required for construction.

 

From a contractor’s perspective, the in-place cost of concrete includes both the amount paid to the ready-mixed concrete manufacturer and the internal costs associated with the labor and equipment the contractor provides. A contractor’s unit cost of concrete is often only a small component of the total in-place cost that takes into account all the labor and equipment costs required to build the forms for the ready-mixed concrete and place and finish the ready-mixed concrete, including the cost of additional labor and time lost as a result of substandard products or delivery delays not covered by warranty or insurance. By carefully designing proper mixes and using advances in mixing technology, we can assist our customers in reducing the amount of reinforcing steel, time and labor they will require in various applications.

 

We provide a variety of services in connection with our sale of ready-mixed concrete that can help reduce our customers’ in-place cost of concrete. These services include:

 

 

 

We produce ready-mixed concrete by combining the desired type of cement, other cementitious materials (described below), sand, gravel and crushed stone with water and, typically, one or more admixtures. These admixtures, such as chemicals, minerals and fibers, determine the usefulness of the product for particular applications.

 

We use a variety of chemical admixtures to achieve one or more of five basic purposes:

 

 

We frequently use various mineral admixtures as supplements to cement, which we refer to as cementitious materials, to alter the permeability, strength and other properties of concrete. These materials include fly ash, ground granulated blast-furnace slag, silica fume and other natural pozzolans. These materials also reduce the amount of cement content used which results in a reduction in CO₂emissions.

 

We also use fibers, such as steel, glass, synthetic and carbon filaments, as additives in various formulations of concrete. Fibers help control shrinkage cracking, thus reducing permeability and improving abrasion resistance. In many applications, fibers can replace welded steel wire and reinforcing bars. Relative to the other components of ready-mixed concrete, these additives generate comparatively high-margins.

 

Aggregates.  We produce crushed stone aggregates, sand and gravel from seven aggregates facilities located in New Jersey and Texas. We sell these aggregates for use in commercial, industrial and public works projects in the markets they serve, as well as consume them internally in the production of ready-mixed concrete in those markets. We produced approximately 3.1 million tons of aggregates in 2010 from these facilities with Texas producing 37.8% and New Jersey 62.2% of that total production. We believe our aggregates reserves provide us with additional raw materials sourcing flexibility and supply availability, although they will provide us with supply for less than 5% of our annual consumption of aggregates. In April 2007, we entered into an agreement to lease our sand pit operations in Michigan and we receive a royalty based on the volume of product produced and sold from the Michigan quarry during the term of the lease.

 

Building Materials.  Our building materials operations supply concrete masonry, various resale materials, products and tools contractors use in the concrete construction industry. These materials include rebar, concrete block, wire mesh, color additives, curing compounds, grouts, wooden forms and numerous other items. Our building materials operations are located near several of our ready-mixed concrete operations in northern California.

 

Precast Concrete Products Segment

 

We produce precast concrete products at seven plants in three states, with five in California, one in Arizona and one in Pennsylvania. Our precast concrete products consist of ready-mixed concrete we either produce on-site or purchase from third parties, which is then poured into reusable molds at our plant sites. After the concrete sets, we strip the molds from the finished products and either place the finished products in inventory or ship them to our customers. Our precast technology produces a wide variety of finished products, including a variety of architectural applications, such as free-standing walls used for landscaping, soundproofing and security walls, signage, utility vaults, manholes, panels to clad a building façade, highway barriers, pre-stressed bridge girders, concrete piles, catch basins and curb inlets.

 

Because precast concrete products are not perishable, we can place these products into inventory and stage them at plants or other distribution sites to serve a larger geographic market area. The cost of

transportation and storage usually limits the market area for these types of products to within approximately 150 miles of our plant sites and, therefore, sales are generally driven by the level of construction activity within the market area served by our plants. Our precast concrete products are marketed by our local sales organizations and are sold to numerous customers.

 

Operations

 

Ready-Mixed Concrete

 

Our ready-mixed concrete plants consist of fixed and portable facilities that produce ready-mixed concrete in wet or dry batches. Our fixed-plant facilities produce ready-mixed concrete that we transport to job sites by mixer trucks. Our portable plant operations deploy our 11 portable plant facilities to produce ready-mixed concrete at the job site that we direct into place using a series of conveyor belts or a mixer truck. We use our portable plants to service high-volume projects or projects in remote locations. Several factors govern the choice of plant type, including:

 

 

Generally, we will construct wet batch plants to serve markets that we expect will have consistently high demand, as opposed to dry batch plants that will serve those markets that we expect will have a less consistent demand. A wet batch plant generally has a higher initial cost and daily operating expenses, but yields greater consistency with less time required for quality control in the concrete produced and generally has greater daily production capacity than a dry batch plant. We believe that construction of a wet batch plant having an hourly capacity of 250 cubic yards currently would cost approximately $1.5 million, while a dry batch plant having the same capacity currently would cost approximately $0.7 million. As of March 29, 2011, our batch plants included 16 wet batch plants and 97 dry batch plants.

 

Our batch operator at a dry batch plant simultaneously loads the dry components of stone, sand and cement with water and admixtures in a mixer truck that begins the mixing process during loading and completes that process while driving to the job site. In a wet batch plant, the batch operator blends the dry components and water in a plant mixer from which an operator loads the already mixed concrete into a mixer truck, which leaves for the job site promptly after loading.

 

Any future decisions we make regarding the construction of additional plants will be impacted by market factors, including:

 

 

Mixer trucks slowly rotate their loads en route to job sites in order to maintain product consistency. Our mixer trucks typically have load capacities of 10 cubic yards, or approximately 20 tons, and an estimated useful life of 12 years. A new truck of this size currently costs between $160,000 and $190,000, depending on the geographic location and design specifications. Depending on the type of batch plant from which the mixer trucks generally are loaded, some components of the mixer trucks usually require refurbishment after three to five years. As of December 31, 2010, we operated a fleet of approximately 800 owned and leased mixer trucks, which had an average age of approximately nine years.

 

In our ready-mixed concrete operations, we emphasize quality control, pre-job planning, customer service and coordination of supplies and delivery. We often obtain purchase orders for ready-mixed concrete months

in advance of actual delivery. A typical order contains specifications the contractor requires the concrete to meet. After receiving the specifications for a particular job, we use computer modeling, industry information and information from previous similar jobs to formulate a variety of mixtures of cement, aggregates, water and admixtures which meet or exceed the contractor’s specifications. We perform testing to determine which mix design is most appropriate to meet the required specifications. The test results enable us to select the mixture that has the lowest cost and meets or exceeds the job specifications. The testing center creates and maintains a project file that details the mixture we will use when we produce the concrete for the job. For quality control purposes, the testing center also is responsible for maintaining batch samples of concrete we have delivered to a job site.

 

We use computer modeling to prepare bids for particular jobs based on the size of the job, location, desired margin, cost of raw materials and the design mixture identified in our testing process. If the job is large enough and has a projected duration beyond the supply arrangement in place at that time, we obtain quotes from our suppliers as to the cost of raw materials we use in preparing the bid. Once we obtain a quotation from our suppliers, the price of the raw materials for the specified job is informally established. Several months may elapse from the time a contractor has accepted our bid until actual delivery of the ready-mixed concrete begins. During this time, we maintain regular communication with the contractor concerning the status of the job and any changes in the job’s specifications in order to coordinate the multisourced purchases of cement and other materials we will need to fill the job order and meet the contractor’s delivery requirements. We confirm that our customers are ready to take delivery of manufactured products throughout the placement process. On any given day, one of our plants may have production orders for dozens of customers at various locations throughout its area of operation. To fill an order:

 

 

Our central dispatch system tracks the status of each mixer truck as to whether a particular truck is:

 

 

The system is updated continuously on the trucks’ status via signals received from sensors. In this manner, the dispatcher can determine the optimal routing and timing of subsequent deliveries by each mixer truck and monitor the performance of each driver.

 

Our plant managers oversee the operations of each of our plants. Our operational employees also include:

 

 

 

We generally operate each of our plants on an extended single shift, with some overtime operation during the year. On occasion, however, we may have projects that require deliveries around the clock.

 

Precast Concrete Products

 

Our precast concrete products operations consist of seven fixed plant sites where precast products are produced, staged and shipped to our customers, and distribution yards. We stage precast products at distribution facilities to serve markets beyond the normal reach of our existing manufacturing sites. Each of our precast manufacturing sites has as its primary components:

 

 

Some of the products we produce are designed by the customer for use in their own systems, while other products are designed by our in-house engineers to meet the needs of our customers through a more standardized product. Each of our precast manufacturing sites produces a range of precast products.

 

Generally, precast structures are manufactured by placing pre-engineered ready-mixed concrete into molds, which are then vibrated to facilitate consolidation of the concrete within the mold and remove any voids created by air that may be trapped during the pouring process. These molds generally utilize some form of reinforcing which can include products ranging from (1) welded steel wire or re-bar placed inside the mold in a pre-engineered design to support the integrity of the finished precast product, to (2) steel fibers or other similar additives which are blended into the ready-mixed concrete during mixing to serve a similar purpose, or a combination of both. Once the pouring is complete, any exposed surfaces are finished and the product is allowed to cure in a controlled environment for a minimum of two to four hours and as long as 24 hours, depending on the product and design specification. After the product has cured, the mold is stripped and prepared for re-use in the manufacturing process.

 

Precast concrete structures are not perishable products. This contributes to our ability to maintain some level of standardized products in inventory at all times, as well as service a larger market area from a plant location than a ready-mixed concrete plant site. Our precast concrete products can be shipped across the country, but due to the weight of the products, shipping is generally limited to within a 150-mile radius of a plant site. Depending on our overall costs, shipments occur either through our existing fleet of crane-equipped trucks or through contract haulers. In some markets, we also install our precast products and provide our customers with the added benefit of eliminating coordination with a third party.

 

Bidding and order fulfillment processes for our precast business are similar to our ready-mixed concrete operations, as previously described above. Cement and aggregates are the two primary raw materials used in precast concrete manufacturing, similar to our ready-mixed concrete operations, while labor costs are second only to our materials cost.

 

Promoting Operational Excellence

 

We strive to be an operationally excellent organization by:

 

 

 

Cement and Other Raw Materials

 

We obtain most of the materials necessary to manufacture ready-mixed concrete and precast concrete products on a daily basis. These materials include cement, other cementitious materials (fly ash, blast furnace slag) and aggregates (stone, gravel and sand), in addition to certain chemical admixtures. With the exception of chemical admixtures, each plant typically maintains an inventory level of these materials sufficient to satisfy its operating needs for a few days. Our inventory levels do not decline significantly or comparatively with declines in revenue during seasonally low periods. We generally maintain inventory at specified levels to maximize purchasing efficiencies and to be able to respond quickly to customer demand.

 

Typically, cement, other cementitious materials and aggregates represent the highest-cost materials used in manufacturing a cubic yard of ready-mixed concrete. Historically, we have purchased cement from several suppliers in each of our major markets. Due to certain industry consolidations and our decision to have a primary and secondary supplier, in certain of our markets, we are now purchasing cement from fewer suppliers than in past years. Chemical admixtures are generally purchased from suppliers under national purchasing agreements.

 

Cement and aggregates prices remained relatively flat to down in most of our markets during 2010, as compared to 2009. Generally, we negotiate with suppliers on a company-wide basis and at the local market level to obtain the most competitive pricing available for cement and aggregates. The demand for construction sector products was weak from 2007 through 2010, with sales volumes significantly below 2006 peak levels. The slowdown in our end-use markets has caused an oversupply of cement in most of our markets, with cement producers slowing down or shutting down domestic production and reducing imported cement to respond to the weak demand. We do not expect to experience cement shortages. Today, in most of our markets, we believe there is an adequate supply of aggregates.

 

We recognize the value in advocating green building and construction as part of our strategy. We initiated EF Technology^®, our commitment to environmentally friendly concrete technologies that significantly reduce potential carbon dioxide (CO₂) emissions. Our EF Technology^® ready-mixed concrete products replace a portion of traditional raw materials with reclaimed fly ash, slag and other materials. This results in an environmentally superior and sustainable alternative to traditional ready-mixed concrete. We believe EF Technology^® reduces greenhouse gases and landfill space consumption and produces a highly durable product. Customers can also receive Leadership in Energy and Environmental Design (“LEED”) credits for the use of this technology. We are also a supporter of the NRMCA Green-Star program, a plant-specific certification that utilizes an environmental management system based on a model of continual improvement. In 2008, two plants in our Dallas/Ft. Worth market were part of the first group of plants to be awarded with Green-Star Certification.

 

Marketing and Sales

 

General contractors typically select their suppliers of ready-mixed concrete and precast concrete. In large, complex projects, an engineering firm or division within a state transportation or public works department may influence the purchasing decision, particularly if the concrete has complicated design specifications. In connection with large, complex projects and in government-funded projects generally, the general contractor or project engineer usually awards supply orders on the basis of either direct negotiation or a competitive bidding process. We believe the purchasing decision for many jobs ultimately is relationship-based. Our marketing efforts target general contractors, developers, design engineers, architects and homebuilders whose focus extends beyond the price of our product to quality, consistency and reducing the in-place cost.

Our marketing and sales strategy emphasizes the sale of value-added products and solutions to customers more focused on reducing their in-place building material costs than on the price per cubic yard of ready-mixed concrete or unit price of the concrete-related product they purchase. Key elements of our customer-focused approach include:

 

 

We have also formed a strategic alliance to provide alternative solutions for designers and contractors by using value-added concrete products. Through this alliance, we offer color-conditioned, fiber-reinforced, steel-reinforced and high-performance concrete and utilize software technology that can be used to design buildings constructed of reinforced concrete.

 

Customers

 

Of our 2010 revenue, commercial and industrial construction contractors represented approximately 55%, residential construction contractors represented approximately 19% and street and highway construction contractors and other public works represented approximately 26%. In 2010, no single customer or project accounted for more than 5% of our total revenue.

 

We rely heavily on repeat customers. Our management and sales personnel are responsible for developing and maintaining successful long-term relationships with key customers.

 

Competition

 

The ready-mixed concrete, precast concrete and concrete-related products industries are highly competitive. Our competitive position in a market depends largely on the location and operating costs of our plants and prevailing prices in that market. Price is the primary competitive factor among suppliers for small or less complex jobs, principally in residential construction. However, timeliness of delivery and consistency of quality and service, along with price, are the principal competitive factors among suppliers for large or complex jobs. Our competitors range from small, owner-operated private companies to subsidiaries or operating units of large, vertically integrated manufacturers of cement and aggregates. Our vertically integrated competitors generally have greater manufacturing, financial and marketing resources than we have, providing them with a competitive advantage. Competitors having lower operating costs than we do or having the financial resources to enable them to accept lower margins than we do will have a competitive advantage over us for jobs that are particularly price-sensitive. Competitors having greater financial resources or less financial leverage than we do may be able to invest more in new mixer trucks, ready-mixed concrete plants and other production equipment or pay for acquisitions which could provide them a competitive advantage over us. See “Risk Factors — Risks Associated With Our Business — We may lose business to competitors who underbid us, and we may be otherwise unable to compete favorably in our highly competitive industry.”

 

Employees

 

As of March 29, 2011, we had approximately 457 salaried employees, including executive officers and management, sales, technical, administrative and clerical personnel, and approximately 1,526 hourly personnel. The number of employees fluctuates depending on the number and size of projects ongoing at any particular time, which may be impacted by variations in weather conditions throughout the year.

 

As of March 29, 2011, approximately 686 of our employees were represented by labor unions having collective bargaining agreements with us. Generally, these agreements have multi-year terms and expire on a staggered basis between 2011 and 2013. Under these agreements, we pay specified wages to covered employees and in most cases make payments to multi-employer pension plans and employee benefit trusts rather than administering the funds on behalf of these employees.

We have not experienced any strikes or significant work stoppages in the past five years. We believe our relationships with our employees and union representatives are satisfactory.

 

Training and Safety

 

Our future success will depend, in part, on the extent to which we can attract, retain and motivate qualified employees. We believe that our ability to do so will depend, in part, on providing a work environment that allows employees the opportunity to develop and maximize their capabilities. We require all field employees to attend periodic safety training meetings and all drivers to participate in training seminars. We employ a national safety director whose responsibilities include managing and executing a unified, company-wide safety program. Employee development and safety are criteria used in evaluating performance in our annual incentive plan for salaried employees.

 

Governmental Regulation and Environmental Matters

 

A wide range of federal, state and local laws, ordinances and regulations apply to our operations, including the following matters:

 

 

In many instances, we are required to have various certificates, permits or licenses to conduct our business. Our failure to maintain these required authorizations or to comply with applicable laws or other governmental requirements could result in substantial fines or possible revocation of our authority to conduct some of our operations. Delays in obtaining approvals for the transfer or grant of authorizations, or failures to obtain new authorizations, could impede acquisition efforts.

 

Environmental laws that impact our operations include those relating to air quality, solid waste management and water quality. These laws are complex and subject to frequent change. They impose strict liability in some cases without regard to negligence or fault. Sanctions for noncompliance may include revocation of permits, corrective action orders, administrative or civil penalties and criminal prosecution. Some environmental laws provide for joint and several strict liability for remediation of spills and releases of hazardous substances. In addition, businesses may be subject to claims alleging personal injury or property damage as a result of alleged exposure to hazardous substances, as well as damage to natural resources. These laws also may expose us to liability for the conduct of or conditions caused by others, or for acts that complied with all applicable laws when performed.

 

We have conducted Phase I environmental site assessments, which are non-intrusive investigations conducted to evaluate the potential for significant on-site environmental impacts, on substantially all the real properties we own or lease and have engaged independent environmental consulting firms to complete those assessments. We have not identified any environmental concerns associated with those properties that we believe are likely to have a material adverse effect on our business, financial position, results of operations or cash flows, but we can provide no assurance material liabilities will not occur. In addition, we can provide no assurance that our compliance with amended, new or more stringent laws, stricter interpretations of existing laws or the future discovery of environmental conditions will not require additional, material expenditures.

 

We believe we have all material permits and licenses we need to conduct our operations and are in substantial compliance with applicable regulatory requirements relating to our operations. Our capital expenditures relating to environmental matters were not material in 2010. We currently do not anticipate any material adverse effect on our business, financial condition, results of operations or cash flows as a result of our future compliance with existing environmental laws controlling the discharge of materials into the environment.

Product Warranties

 

Our operations involve providing ready-mixed concrete, precast concrete products and other concrete formulations or products that must meet building code or other regulatory requirements and contractual specifications for durability, stress-level capacity, weight-bearing capacity and other characteristics. If we fail or are unable to provide products meeting these requirements and specifications, material claims may arise against us and our reputation could be damaged. In the past, we have had significant claims of this kind asserted against us that we have resolved. There currently are, and we expect that in the future there will be, additional claims of this kind asserted against us. If a significant product-related claim is resolved against us in the future, that resolution may have a material adverse effect on our business, financial condition, results of operations and cash flows.

 

Insurance

 

Our employees perform a significant portion of their work moving and storing large quantities of heavy raw materials, driving large mixer and other trucks in heavy traffic conditions and delivering concrete at construction sites or in other areas that may be hazardous. These operating hazards can cause personal injury and loss of life, damage to or destruction of properties and equipment and environmental damage. We maintain insurance coverage in amounts and against the risks we believe are in accord with industry practice, but this insurance may not be adequate to cover all losses or liabilities we may incur in our operations, and we may be unable to maintain insurance of the types or at levels we deem necessary or adequate or at rates we consider reasonable. For additional discussion of our insurance programs, see Note 20 to our consolidated financial statements included in this prospectus.

 

Legal Proceedings

 

The information set forth under the heading “Legal Proceedings” in Note 20, “Commitments and Contingencies,” to our consolidated financial statements included in this prospectus is incorporated by reference into this section.

 

Properties

 

Facilities

 

The table below lists our concrete plants as of March 29, 2011. We believe these plants are sufficient for our current needs. The ready-mixed concrete volumes shown are the volumes from continuing operations each location produced in 2010.

 

We produce crushed stone aggregates, sand and gravel, from seven aggregates facilities located in Texas and New Jersey. We sell these aggregates for use in commercial, industrial and public works projects in the markets they serve, as well as consume them internally in the production of ready-mixed concrete in those markets. We produced approximately 3.1 million tons of aggregates in 2010, with Texas producing 37.8% and New Jersey 62.2% of that total production. We believe our aggregates reserves provide us with additional raw materials sourcing flexibility and supply availability, although they will provide us with supply for less than 5% of our annual consumption of aggregates. In April 2007, we entered into an agreement to lease our sand pit operations in Michigan to a third party. We now receive a royalty based on the volume of product produced and sold from the quarry during the term of the lease.

 

Equipment

 

As of December 31, 2010, we had a fleet of approximately 800 owned and leased mixer trucks and 1,232 other vehicles. Our own mechanics service most of the fleet. We believe these vehicles generally are well maintained and are adequate for our operations. The average age of our mixer trucks is approximately nine years.

 

Directors and Executive Officers

 

The following table sets forth information regarding our directors and executive officers as of March 29, 2011.

 

 

Set forth below is a brief description of the business experience of each of the members of our board of directors and our executive officers.

 

Eugene I. Davis- Director and Chairman of the Board

 

Eugene I. Davis has served as our Chairman of the Board since we emerged from Chapter 11 proceedings in 2010. In 1997, Mr. Davis formed PIRINATE Consulting Group, LLC, a privately held consulting firm specializing in turnaround management, merger and acquisition consulting, hostile and friendly takeovers, proxy contests and strategic planning advisory services for domestic and international public and private business entities. He has served as PIRINATE’s Chairman and Chief Executive Officer since its formation, and has advised, managed, sold, liquidated and served as a Chief Executive Officer, Chief Restructuring Officer, Director, Committee Chairman and Chairman of the Board for a number of businesses operating in diverse sectors such as telecommunications, automotive, manufacturing, high-technology, medical technologies, metals, energy, financial services, consumer products and services, import-export, mining, and transportation and logistics. Mr. Davis began his career as an attorney and international negotiator with Exxon Corporation and Standard Oil Company (Indiana) and as a partner in two Texas-based law firms, where he specialized in corporate/securities law, international transactions and restructuring advisory. Mr. Davis holds a bachelor’s degree from Columbia College, a master of international affairs degree (MIA) in international law and organization from the School of International Affairs of Columbia University, and a Juris Doctorate from Columbia University School of Law.

 

Mr. Davis also serves on the board of directors of Atlas Air Worldwide Holdings, Inc., Knology, Inc., DEX One Corp., Ambassadors International Inc., Rural/Metro Corp, Spectrum Brands, Inc., YRC Worldwide Inc., GSI Group Inc. and Trump Entertainment Resorts, Inc. Within the last five years, Mr. Davis has served

as a director of American Commercial Lines, Inc., Delta Airlines, Inc., SeraCare Life Sciences Inc., Solutia, Inc., Oglebay Norton Company, McLeod Communications, Footstar, Inc., PRG Schultz International, Inc., Silicon Graphics, Inc., Foamex, Inc., Ion Broadcasting, Viskase Companies, Inc., Granite Broadcasting Corporation, Silicon Graphics International Corp. and Media General, Inc. As a result of these and other professional experiences, coupled with his strong leadership qualities, our Board of Directors concluded that Mr. Davis is well qualified to serve as one of our directors.

 

Michael W. Harlan- Director, President and Chief Executive Officer

 

Michael W. Harlan has served as our President and Chief Executive Officer since 2007, and as one of our directors since 2006. Previously, he served as one of our directors from 1999 to 2003. From 2003 through 2007, Mr. Harlan served as our Executive Vice President and Chief Operating Officer. Mr. Harlan served as our Chief Financial Officer from 1998 to 2004, as our Senior Vice President from 1998 to 2003, and as our Corporate Secretary from 1998 to 1999. Mr. Harlan is also a director and chairman of the audit committee of Waste Connections, Inc., a publicly traded solid waste services firm.

 

Our Board of Directors concluded that Mr. Harlan is well qualified to serve as one of our directors, based on his thorough knowledge of our Company and the industries in which we participate, and his prior experience and public company board service. Since the inception of our company in 1999, in addition to his service as a director, Mr. Harlan has been involved in all functional aspects, including service as our Chief Operating Officer, Chief Financial Officer and Chief Executive Officer. Mr. Harlan is also actively involved in numerous industry associations, including serving as a director and member of the executive committee of the National Ready-Mixed Concrete Association, the industry’s largest trade organization (the “NRMCA”); serving on the Board of Trustees, Chairman of the Program Committee and a member of the Advisory Council of the RMC Research & Education Foundation; and service as a member of the Concrete Industry Management National Steering Committee.

 

Prior to joining our company, Mr. Harlan served in a number of executive management and financial roles, including as Senior Vice President and Chief Financial Officer of Apple Orthodontix, Inc., an orthodontic practice management company; various positions in the finance and acquisitions departments, including Treasurer, of Sanifill, Inc., an international environmental services company that USA Waste Services, Inc. acquired in 1996; and various positions in the tax and corporate financial consulting services division of Arthur Anderson LLP, where he was a Manager. Mr. Harlan is also a certified public accountant. Including his service on our Board, Mr. Harlan has more than 11 years of service as a public company director. Mr. Harlan holds a B.A. degree from the University of Mississippi.

 

Kurt M. Cellar- Director

 

Kurt M. Cellar has served as one of our directors since we emerged from Chapter 11 proceedings in 2010. Since January 2008, Mr. Cellar has been a consultant and board member to companies in a variety of industries as well as a private investor. From 1999 to 2008, Mr. Cellar worked for the hedge fund Bay Harbour Management, L.C., where he was partner and portfolio manager from 2003 until his departure. During his tenure at Bay Harbour, the fund won many investor awards including The Absolute Return “Hedge Fund of the Year” award in 2006. Prior to Bay Harbour, Mr. Cellar was with the private equity firm Remy Investors. Before that, he was a strategy consultant at LEK/Alcar.

 

Mr. Cellar is currently a director of Aventine Renewable Energy, Hawaiian Telcom, Home Buyers Warranty, Six Flags Entertainment and Vertis Communications. Within the last five years, Mr. Cellar has served as a director of Telcove Inc. (f/k/a Adelphia Business Solutions), Harwood Lumber Manufacturing, Inc., The Penn Traffic Company and RCN Corporation. Mr. Cellar has a BA in Economics/Business from the University of California, Los Angeles and a Masters in Business Administration from the Wharton School of Business. Mr. Cellar is a Chartered Financial Analyst. Our Board of Directors concluded that Mr. Cellar is well qualified to serve as one of our directors based on his financial expertise and considerable board experience.

Michael D. Lundin- Director

 

Michael D. Lundin has served as one of our directors since we emerged from Chapter 11 proceedings in 2010. Since June 2008, he has served as the Head of Operations, Chairman North Coast Minerals with Resilience Capital Partners. Previously, Mr. Lundin was the President and Chief Executive Officer of Oglebay Norton Company from December 2002 to February 2008, where he also served as the Chief Operations Officer and the President of the Great Lakes Mineral Division and the Michigan Limestone Operations.

 

Mr. Lundin also serves as the non-executive chairman of each of Broder Brothers and Euromax. Mr. Lundin is also a director of Rand Logistics, Avtron, Inc. and the Cleveland Sight Center. Within the last five years, Mr. Lundin served as a director of World Technologies, Inc., Oglebay Norton Company and United Shipping Alliance. Mr. Lundin has a BS from the University of Wisconsin-Stout and a Masters in Business Administration from Loyola Marymount University. Our Board of directors concluded that Mr. Lundin’s experience in the aggregates sector and board service makes him well qualified to serve as one of our directors.

 

Robert M. Rayner- Director

 

Robert M. Rayner has served as one of our directors since we emerged from Chapter 11 proceedings in 2010. Mr. Rayner is President of RM Industries, LLC, an advisory firm providing services relating to management, turnarounds and acquisitions primarily to privately-held and private equity owned firms. Mr. Rayner also serves as the chairman of the board of TestEquity LLC, an Evercore portfolio company, and as a director of, and a business advisor to, Industrial Insulation Group LLC. Previously, he served as the President and Chief Executive Officer, and a director, of Specialty Products & Insulation Co. (“SPI”), a leading national distributor of insulation and architectural products and an Evercore portfolio company, from March 2004 to SPI’s sale in September 2009. Prior to joining SPI, Mr. Rayner was the President and Chief Operating Officer of Essroc Corp. (“Essroc”), the U.S. operations of a global cement company, from 1994 to early 2002. He had previously served as the Chief Financial Officer and President of the Construction Materials Division of Essroc. Prior to joining Essroc, for twelve years, Mr. Rayner held various domestic and international positions in corporate finance, treasury and international business at Pepsi Co., Inc. and before that he was a consulting civil engineer in the U.K. for six years

 

In 2001, Mr. Rayner was elected by his peers as the Chairman of the Board of the Portland Cement Association, the non-profit organization for the cement producers in the United States and Canada. Mr. Rayner holds a civil engineering degree from Bristol University, England and is a professional member of the U.K. Institution of Civil Engineers. He has a Masters in Business Administration in finance from the London Business School and a Diploma in International Management from London Business School, New York University and Hautes Etudes Commerciales, France. Our Board of Directors concluded that Mr. Rayner is well qualified to serve as one of our directors based on his experience in the cement industry, financial expertise and prior board experience.

 

Colin M. Sutherland- Director

 

Colin M. Sutherland has served as one of our directors since we emerged from Chapter 11 proceedings in 2010. He has been a Corporate Development Consultant with Armtec Infrastructure Income Fund since July 2010. Previously, Mr. Sutherland served as the Executive Vice President of Catawba Resources from March 2007 to April 2010 and as the Vice President, Business Development, Integration & Strategy at Holcim (US) Inc. from August 2003 to February 2007. He also served as the Vice President, Cementitious Materials with Lafarge S.A. from November 2001 to July 2003. Mr. Sutherland holds a Bachelor of Commerce degree from the Queen’s University. He has also pursued graduate studies at the Wharton School of Business. Based on Mr. Sutherland’s considerable experience in the building products sector, our Board of Directors concluded that he is well qualified to serve as one of our directors.

James C. Lewis- Senior Vice President and Chief Financial Officer

 

James C. Lewis has served as our Senior Vice President and Chief Financial Officer since 2010. Mr. Lewis has over 20 years of senior financial management experience. From 2006 through 2010, Mr. Lewis served as Vice President and Treasurer, and from 2003 through 2006, he served as Assistant Treasurer, of McDermott International, Inc., a global engineering and construction company with $6 billion in revenue. From 1995 through 2003, Mr. Lewis held various positions of increasing responsibility in the finance departments of Enron Corporation, including Vice President beginning in 1999. Prior to 1995, Mr. Lewis held various finance positions with Tejas Power Corp. and First City Bancorportion of Texas.

 

M. Terry Green- Senior Vice President- Operations

 

M. Terry Green has served as our Senior Vice President — Operations since 2005, and has also served as our Vice President and General Manager — Redi-Mix, LLC since 2009. He served as our Vice President — Operational Integration from 1999 through 2005. Mr. Green has managed the operations of ready-mixed concrete producers and other transportation-related businesses for over 20 years. From 1998 until 1999, he served as Vice President of Maintenance for Armellini Express Lines, Inc. From 1989 until 1998, Mr. Green served as Director of Maintenance, Equipment and Purchasing for the concrete products division of Southdown, Inc. From 1980 until 1989, Mr. Green held various positions with Kraft, Inc., serving as Private Fleet Operations Manager from 1988 until 1989.

 

Gary J. Konnie- Vice President- Human Resources

 

Gary J. Konnie has served as our Vice President — Human Resources since 2004. Mr. Konnie has over 30 years of human resources management experience. From 2002 through 2004, Mr. Konnie served as Senior Vice President of Human Resources of El Paso Corporation, a provider of natural gas and related energy products. From 1999 through 2002, he served as El Paso’s Vice President of Human Resources, and, from 1998 through 1999, he served as El Paso’s Director of Human Resources. From 1996 through 1998, Mr. Konnie served as Vice President of Human Resources for Meridian Aggregates Company, a producer of construction aggregates. Prior to 1996, Mr. Konnie held various human resources positions with Rio Tinto plc, Burlington Resources Inc., Boise Cascade Corp. and General Motors.

 

Curt M. Lindeman- Vice President, General Counsel and Corporate Secretary

 

Curt M. Lindeman has served as our Vice President and General Counsel since 2007, and as our Corporate Secretary since 2006. From 2006 through 2007, he served as our Assistant General Counsel. From 2002 through 2006, Mr. Lindeman was self-employed as an attorney representing various companies, including U.S. Concrete. From 1999 through 2002, he served as Senior Counsel for Coach USA, Inc., a ground passenger transportation company. In 1999, Mr. Lindeman served as counsel for Coral Energy, L.P., a wholesale natural gas and power marketing and trading company affiliated with Shell Oil Company. From 1997 to 1999, he served as an attorney with Shook, Hardy & Bacon L.L.P.

 

Wallace H. Johnson- Vice President- Marketing and Sales

 

Wallace H. Johnson has served as our Vice President — Marketing and Sales since 2004. Mr. Johnson has over 30 years of experience in the construction supply industry. From 2002 through 2004, Mr. Johnson served as Vice President of Sales and Marketing of Systech Inc., a provider of software systems for the ready-mixed concrete and aggregate industries. From 2001 through 2002, he served as Director of Sales of Buildpoint Corp., a provider of online bid management services for general contractors that Construction Software Technologies, Inc. acquired in 2004. From 1977 through 2001, Mr. Johnson served in various sales and sales management positions within the construction products division of W. R. Grace & Co., a global specialty chemicals and materials company, including from 1996 through 2001 as regional sales manager and from 1993 through 1996 as North American sales manager.

Douglas W. McLaughlin-Vice President- Precast Division

 

Douglas W. McLaughlin has served as our Vice President — Precast Division since 2007. From 1999 through 2007, he served as Vice President and General Manager of San Diego Precast Concrete, Inc., a company we acquired in 1999. From 1996 through 1999, Mr. McLaughlin was President of San Diego Precast Concrete. With 35 years of experience in the precast industry, Mr. McLaughlin has worked in various operations positions. Mr. McLaughlin is a founding member of the California Precast Concrete Association and has served on its Board of Directors for eight years, including two terms as President. In addition, he has served on the Board of Directors and Executive Committee for the National Precast Concrete Association, where he has chaired several committees. He is also a founding member of the Patrons Group for the Concrete Industry Management Program at Arizona State University.

 

Michael L. Gentoso- Vice President- Atlantic Region

 

Michael L. Gentoso has served as our Vice President — Atlantic Region since 2007. From 1998 through 2007, he served as Vice President and General Manager of Eastern Concrete Materials, Inc. (“Eastern”), a company we acquired in 2001. Mr. Gentoso has been with Eastern or its predecessors since 1991, serving as Vice President of Operations from 1995 through September 1998, and Vice President of Finance from March 1991 through September 1995. From 1980 through 1991, Mr. Gentoso was employed with the BOC Group PLC, where he held various positions of increasing responsibility in the accounting and finance departments, including Vice President Ohmeda Medical Equipment, Controller Ohmeda Infant Care Division, Controller Ohmeda Medical Equipment, Manager, Financial Planning & Plant Accounting Airco Welding Equipment, and Manager Financial Accounting BOC Group Inc. Mr. Gentoso is the current President of the New Jersey Concrete & Aggregates Association and is a trustee on the TENJ Pension and Welfare Funds in New Jersey.

 

Jeff L. Davis- Vice President and General Manager- Central Concrete Supply Co., Inc.

 

Jeff L. Davis has served as Vice President and General Manager of Central Concrete Supply Co., Inc. (“Central”) since 2005. From 2001 to 2005, Mr. Davis served as Vice President of Operations of Central. Prior to joining U.S. Concrete in 2001, Mr. Davis served as Vice President Concrete for Cadman Inc., a Lehigh Heidelberg Cement Company, operating in the Seattle, Washington market. Mr. Davis has 35 years of experience in the ready-mixed concrete, aggregate and cement industry, serving in various sales and operational roles. Mr. Davis is a past President and Board member of the Washington Concrete and Aggregate Producers Association, past President and Board member of the Idaho Concrete and Aggregate Producers Association, member of the American Concrete Institute, Chairman of the 1997 American Concrete Institute Convention National, and former Chairman of the NRMCA Environmental Task Group of the OES Committee.

 

Jeffrey W. Roberts- Vice President and General Manager- Ingram Concrete, LLC

 

Jeffrey W. Roberts has served as the Vice President and General Manager of Ingram Concrete, LLC (“Ingram”) since 2006. From 1994 through 2006, Mr. Roberts held various positions of increasing responsibility for Ingram, including Vice President of Sales and Operations from 2003 through 2006, Sales and Operations Manager from 1997 through 2003, and Quality Control Manager from 1994 through 1997. From 1993 to 1994, he served as the Quality Control Manager for Campbell Concrete. From 1990 to 1993, Mr. Roberts served as Technical Sales Representative for Cormix Construction Chemicals (formerly Gifford Hill Chemical), with sales responsibility in southeast Texas. From 1989 to 1990, he served as Sales Representative and Quality Control Assistant for Gifford-Hill Concrete in Ft. Worth, Texas. Mr. Roberts also serves as a director on the board of the Texas Aggregate and Concrete Association.

 

Kent D. Cauley- Corporate Controller

 

Kent D. Cauley has served as our Corporate Controller since November 2008. From 2004 through October 2008, Mr. Cauley served as Vice President and Controller of Grey Wolf, Inc., a provider of turnkey and contract oil and gas land drilling services in the United States. From 2003 through 2004, he served as

Assistant Controller, and from 2000 through 2003, he served as Financial Reporting Manager for Grey Wolf. Prior to joining Grey Wolf, Mr. Cauley was employed by Ernst & Young LLP. Mr. Cauley is a certified public accountant.

 

Recent Events

 

On March 30, 2011, the Company announced that Mr. Harlan will be leaving the Company. The Board of Directors engaged Russell Reynolds Associates to assist in the search for a new CEO and named Director Kurt Cellar to head the search committee. Mr. Harlan will remain with the Company in his current role while the Board of Directors conducts a search for his replacement. In addition, Mr. Harlan agreed to provide consulting services to the Company for a period of up to one year after his termination in an amount no greater than 20% of the average level of services he provided to the Company in the 36 month period prior to his termination and at a monthly rate to be mutually agreed upon by the parties. For information regarding the terms of Mr. Harlan’s severance agreement, see “Executive Compensation — Post-Employment Arrangements for Our Executive Officers.”

 

Information Concerning the Board of Directors and Committees

 

Board of Directors

 

Our Board met thirteen times and took action by unanimous written consent on five occasions during 2010 prior to the Effective Date, and met ten times and took action by unanimous written consent on one occasion in 2010 from the Effective Date through the end of 2010. Prior to the Effective Date, our Board had standing audit, compensation, nominating and corporate governance and executive committees, and now has standing audit (which includes corporate governance) and compensation committees. Committee designations are usually made by the Board following the election of directors at each annual meeting of our stockholders, and upon the addition or resignation of directors between annual meetings, if needed. Since the date of our 2010 proxy, our Board made committee designations following the May 3, 2010 meeting of our stockholders, and on the Effective Date.

 

During 2010, each of the Pre-Emergence Directors and Post-Emergence Directors attended at least 75% of the meetings of the Board and any committee of the Board on which such director served. Our common stock is quoted on the Nasdaq Capital Market (the “Nasdaq”). As a result, we are subject to the Nasdaq’s listing standards. The Board has determined that five of its Post-Emergence Directors, Messrs. Davis, Cellar, Lundin, Rayner and Sutherland, are “independent directors” within the meaning of the applicable listing standards of the Nasdaq.

 

Our policy on attendance by the members of the Board at our annual meetings of stockholders is that members of the Board are invited, but are not required to attend. Each of the Pre-Emergence Directors attended last year’s annual meeting.

 

Audit Committee

 

The audit committee met five times and took action by unanimous written consent on one occasion during 2010 prior to the Effective Date, and met four times from the Effective Date through the end of 2010. Prior to the Effective Date, the audit committee consisted of Ms. Ricciardello (chair) and Messrs. Foster and Piecuch. Since the Effective Date, the audit committee has consisted of Messrs. Rayner (chair), Davis and Sutherland. The audit committee is governed by a charter our Board has adopted, a copy of which is available on our Web site at www.us-concrete.com. The Board has determined that each member of the audit committee is an “independent director” in accordance with the applicable rules of the SEC and applicable corporate governance standards of the Nasdaq. The Board has also determined that Messrs. Rayner and Davis are each an “audit committee financial expert,” as defined in the applicable rules of the SEC. For information relating to Messrs. Rayner and Davis’ backgrounds, see their respective biographical information under “Directors” above.

The audit committee assists our Board in fulfilling its oversight responsibility relating to:

 

 

The audit committee’s purpose is to oversee our accounting and financial reporting processes, the audits of our financial statements, the qualifications of our independent registered public accounting firm and the performance of our internal auditors and outside firms providing internal audit services.

 

On the Effective Date, our nominating and corporate governance committee was dissolved and the audit committee assumed the corporate governance duties and functions previously authorized to be performed by our nominating and corporate governance committee and all other functions and duties relating to corporate governance matters. Therefore, the audit committee now assists the Board in insuring that we operate in accordance with our Corporate Governance Guidelines, leads the Board in its annual assessment of the performance of the Board, its committees and each of the directors, and reviews, evaluates and recommends changes to our Corporate Governance Guidelines.

 

Our management is responsible for preparing our financial statements and for our internal controls, and our independent registered public accounting firm is responsible for auditing those financial statements and the related audit of internal control over financial reporting. The audit committee is not providing any expert or special assurance as to our financial statements or any professional certification as to the independent registered public accounting firm’s work. The following functions are among the key duties and responsibilities of the audit committee:

 

 

 

 

 

The audit committee meets separately with our internal auditors and the independent registered public accounting firm to provide an open avenue of communication.

 

Compensation Committee

 

The compensation committee met four times and took action by unanimous written consent on four occasions during 2010 prior to the Effective Date, and met three times from the Effective Date through the end of 2010. Prior to the Effective Date, the compensation committee consisted of Messrs. Piecuch (chair), Foster and Dillon. Since the Effective Date, the compensation committee has consisted of Messrs. Cellar (chair), Lundin and Sutherland. Each member of the compensation committee is an “independent director” within the meaning of the applicable rules of the SEC and applicable Nasdaq listing standards. The

compensation committee is governed by a charter our Board has adopted, a copy of which is available on our Web site at www.us-concrete.com under Investor Relations — Corporate Governance.

 

There are three primary responsibilities of our compensation committee: (1) to discharge the Board’s responsibilities relating to compensation of our executives and directors; (2) to oversee the adoption of policies that govern our compensation programs, including stock and incentive plans; and (3) to produce annual reports relating to our compensation discussion and analysis for inclusion in the proxy statements for our annual meetings. The committee operates under a written charter adopted by our Board. Pursuant to the charter, the committee has the resources necessary to discharge its duties and responsibilities, including the authority to retain outside counsel or other experts or consultants as it deems necessary. The following are the key functions of the compensation committee, any of which may be delegated to one or more subcommittees, as the committee may deem necessary or appropriate:

 

 

For additional information regarding the compensation committee, see “Executive Compensation — Compensation Committee Interlocks and Insider Participation” and “Executive Compensation — Compensation Discussion and Analysis.”

Independent Director Oversight of Director Nominations / Nominating and Corporate Governance Committee

 

On the Effective Date, our nominating and corporate governance committee was dissolved. Prior to the Effective Date, the nominating and corporate governance committee met two times and took action by unanimous written consent on one occasion during 2010, and consisted of Messrs. Porter (chair) and Dillon and Ms. Ricciardello.

 

On the Effective Date, the Board determined that the duties and functions previously authorized to be performed by our nominating and corporate governance committee could more efficiently be performed by dividing such duties and functions between the audit committee and our independent directors. Upon the dissolution of the nominating and corporate governance committee, the audit committee assumed the corporate governance duties and functions previously authorized to be performed by our nominating and corporate governance committee and all other functions and duties relating to corporate governance matters. The Board assumed responsibility for evaluating candidates for membership on the Board, including any nominations for election to the Board validly made by our stockholders. The director nominees will be selected by a majority of the Board’s “independent directors” within the meaning of the applicable listing standards of the Nasdaq, in a vote in which only independent directors participate.

 

In carrying out its function to evaluate nominees for election to the Board, the Board considers a candidate’s mix of skills, experience, character, commitment and diversity of background, all in the context of the requirements of the Board at that time. Each candidate should be prepared to participate fully in Board activities, including attendance at, and active participation in, meetings of the Board, and not have other personal or professional commitments that would, in the Board’s judgment, interfere with or limit such candidate’s ability to do so. Additionally, in determining whether to nominate a director for re-election, the Board also considers the director’s past attendance at Board and committee meetings and participation in and contributions to the activities of the Board. The Board has no stated specific minimum qualifications that must be met by a candidate for a position on our Board. The Board does, however, believe it appropriate for at least one member of the Board to meet the criteria for an “audit committee financial expert” as defined by SEC rules, and for a majority of the members of the Board to meet the definition of “independent director” within the meaning of the applicable Nasdaq listing standards.

 

The Board’s methods for identifying candidates for election to the Board (other than those proposed by U.S. Concrete’s stockholders, as discussed below) include the solicitation of ideas for possible candidates from a number of sources, including members of the Board, our executives, individuals personally known to the members of the Board and other research. The Board also may select and compensate a third-party search firm to help identify potential candidates, if it deems it advisable to do so.

 

The Board will consider nominees stockholders recommend. Stockholders may submit nominations to the Board in care of Corporate Secretary, U.S. Concrete, Inc., 2925 Briarpark Drive, Suite 1050, Houston, Texas 77042. A stockholder’s notice providing for the nomination of a person or persons for election as a director or directors shall set forth, as to the stockholder giving the notice and the beneficial owner, if any, on whose behalf the nomination is made (including any interests described therein held by any affiliates or associates (each within the meaning of Rule 12b-2 under the Exchange Act) of such stockholder or beneficial owner or by any member of such stockholder’s or beneficial owner’s immediate family sharing the same household, in each case as of the date of such stockholder’s notice, which information shall be confirmed or updated, if necessary, by such stockholder and beneficial owner as of the record date for determining the stockholders entitled to notice of the meeting of stockholders and as of the date that is ten (10) business days prior to such meeting of the stockholders or any adjournment or postponement thereof, and such confirmation or update shall be received by the Secretary at our principal executive offices not later than the close of business on the fifth business day after the record date for the meeting of stockholders (in the case of the update and supplement required to be made as of the record date), and not later than the close of business on the eighth business day prior to the date for the meeting of stockholders or any adjournment or postponement

thereof (in the case of the update and supplement required to be made as of ten (10) business days prior to the meeting of stockholders or any adjournment or postponement thereof)):

 

 

 

As to each person whom the stockholder proposes to nominate for election or reelection as a director, the stockholder’s notice shall set forth:

 

 

The Board will consider all candidates identified through the processes described above, whether identified by the Board or by a stockholder, and will evaluate each of them on the same basis.

 

Executive Committee

 

On the Effective Date, our executive committee was dissolved. Prior to the Effective Date, the executive committee took action by unanimous written consent on one occasion during 2010, and consisted of Messrs. Harlan (chair), Piecuch, Foster and Albanese. The key duty and responsibility of the executive committee was reviewing and monitoring the strategic direction of our acquisition program, which the full Board will now oversee.

 

Compensation Discussion and Analysis

 

The following Compensation Discussion and Analysis describes the material elements of compensation for the Company’s executive officers identified in the Summary Compensation Table (the “Named Executive Officers” or “NEOs”). This Compensation Discussion and Analysis addresses the following topics:

 

 

The Compensation-Setting Process

 

Committee Meetings

 

Our compensation committee (“compensation committee” or “committee”) meets as often as it determines necessary to perform its duties and responsibilities and works with management to establish the agenda for each meeting. Prior to the Effective Date, the committee held four meetings and took action by unanimous written consent on four occasions during 2010. Since the Effective Date, the committee met three times in 2010, and met 1 time in the first two months of 2011.

 

The committee typically meets at least annually with our chief executive officer and vice president of human resources, and, when appropriate and as needed, general counsel and outside advisors. The committee also meets as needed in executive sessions without management, including at least annually to evaluate the performance of our chief executive officer, to determine his bonus for the prior fiscal year, to set his base salary for the then current calendar year, and to consider and approve any grants to him of equity incentive compensation. The committee typically receives and reviews materials in advance of each meeting. These materials include information that our management believes will be helpful to the committee, as well as materials that the committee has specifically requested. Depending on the agenda for the particular meeting, this information may include:

 

 

Management’s Role in the Compensation-Setting Process

 

Management plays a key role in the compensation-setting process for the executive officers, except with respect to the President and chief executive officer. The most significant aspects of management’s role are:

 

 

The compensation committee has designated our chief executive officer, chief financial officer and vice president of human resources, collectively, as the “Administrator” of our short-term incentive plan, which is our annual cash bonus plan. The compensation committee chose those individuals because of their access to financial information and individual performance criteria necessary to administer the plan. The Administrator has the authority to interpret the plan, to exercise discretion in interpolating performance levels and award payouts outside of or between the designated benchmarks, as well as to take all steps and make all determinations in connection with the incentive plan and bonus payouts as it deems necessary. All award payouts must be approved by the committee.

 

Our chief executive officer also participates in committee meetings at the committee’s request to provide:

 

 

Executive Compensation Philosophy and Policies

 

Our ability to hire and retain executives and other key employees is essential to our success and the success of our stockholders. Thus, the objectives of our executive compensation program are to:

 

 

We believe that we offer a work environment in which executive employees are allowed to use their abilities to achieve personal and professional satisfaction. However, we also understand that our executive employees have a choice regarding where they pursue their careers, and the compensation we offer plays a significant role in their decisions to choose to remain with us. In order to achieve our objectives, our executive compensation program is designed to: