UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D. C. 20549
FORM 10–K
x |
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
For the Fiscal Year Ended December 31, 2015
or
¨ |
Transition Report Pursuant to Section 13 or 15 (d) of the Securities Exchange Act of 1934 |
For the transition period from to
Commission File Number 1-8472
Hexcel Corporation
(Exact name of registrant as specified in its charter)
Delaware |
|
94-1109521 |
(State of Incorporation) |
|
(I.R.S. Employer Identification No.) |
281 Tresser Boulevard
Stamford, Connecticut 06901
(Address of principal executive offices and zip code)
Registrant’s telephone number, including area code: (203) 969-0666
Securities registered pursuant to Section 12(b) of the Act:
Title of each class |
|
Name of each exchange on which registered |
COMMON STOCK |
|
NEW YORK STOCK EXCHANGE |
Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes x No ¨
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ¨ No x
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No ¨
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ¨
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes x No ¨
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.
Large accelerated filer x |
|
Accelerated filer ¨ |
|
|
|
Non-accelerated filer ¨ |
|
Smaller reporting company ¨ |
(Do not check if a smaller reporting company) |
|
|
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ¨ No x
The aggregate market value of the registrant’s common stock held by non-affiliates was $4,785,337,672 based on the reported last sale price of common stock on June 30, 2015, which is the last business day of the registrant’s most recently completed second fiscal quarter.
The number of shares outstanding of each of the registrant’s classes of common stock, as of the latest practicable date.
Class |
|
Outstanding as of January 27, 2016 |
COMMON STOCK |
|
93,290,125 |
Documents Incorporated by Reference:
Proxy Statement for Annual Meeting of Stockholders (to the extent specified herein) — Part III.
ITEM 1. Business.
General Development of Business
Hexcel Corporation, founded in 1946, was incorporated in California in 1948, and reincorporated in Delaware in 1983. Hexcel Corporation and its subsidiaries (herein referred to as “Hexcel”, “the Company”, “we”, “us”, or “our”), is a leading advanced composites company. We develop, manufacture, and market lightweight, high-performance structural materials, including carbon fibers, specialty reinforcements, prepregs and other fiber-reinforced matrix materials, honeycomb, adhesives, engineered honeycomb and composite structures, for use in Commercial Aerospace, Space & Defense and Industrial markets. Our products are used in a wide variety of end applications, such as commercial and military aircraft, space launch vehicles and satellites, wind turbine blades, automotive, a wide variety of recreational products and other industrial applications.
We serve international markets through manufacturing facilities, sales offices and representatives located in the Americas, Asia Pacific, Europe and Russia. We are also a partner in a joint venture in Malaysia, which manufactures composite structures for Commercial Aerospace applications and a joint venture in the UK which specializes in lightweight multi-axial fabrics. We acquired the remaining 50% interest in Formax, (UK) Limited (“Formax”) on January 5, 2016.
Narrative Description of Business and Segments
We are a manufacturer of products within a single industry: Advanced Composites. Hexcel has two reportable segments: Composite Materials and Engineered Products. The Composite Materials segment is comprised of our carbon fiber, specialty reinforcements, resins, prepregs and other fiber-reinforced matrix materials, and honeycomb core product lines. The Engineered Products segment is comprised of lightweight high strength composite structures, molded components, engineered core and honeycomb products with added functionality.
The following summaries describe the ongoing activities related to the Composite Materials and Engineered Products segments as of December 31, 2015.
Composite Materials
The Composite Materials segment manufactures and markets carbon fibers, fabrics and specialty reinforcements, prepregs and other fiber-reinforced matrix materials, structural adhesives, honeycomb, molding compounds, tooling materials, polyurethane systems and laminates that are incorporated into many applications, including military and commercial aircraft, wind turbine blades, recreational products, transport (cars, boats, trains) and other industrial applications.
2
The following table identifies the principal products and examples of the primary end-uses from the Composite Materials segment:
SEGMENT |
|
PRODUCTS |
|
PRIMARY END-USES |
COMPOSITE MATERIALS |
|
Carbon Fibers |
|
● Raw materials for prepregs, fabrics and specialty reinforcements ● Filament winding for various aerospace, defense and industrial applications |
|
|
|
||
|
|
Fabrics, Multiaxials and Specialty Reinforcements |
|
● Raw materials for prepregs and honeycomb ● Composites and components used in aerospace, defense, wind energy, automotive, recreation, marine and other industrial applications |
|
|
|
||
|
|
Prepregs, Other Fiber-Reinforced Matrix Materials and Resins |
|
● Composite structures ● Commercial and military aircraft components ● Satellites and launchers ● Aeroengines ● Wind turbine and helicopter blades ● Cars, boats and trains ● Skis, snowboards, bicycles and hockey sticks |
|
|
|
||
|
|
Structural Adhesives |
|
● Bonding of metals, honeycomb and composite materials |
|
|
|
||
|
|
Honeycomb |
|
● Composite structures and interiors ● Impact and shock absorption systems ● Helicopter blades |
Carbon Fibers: HexTow® carbon fibers are manufactured for sale to third-party customers as well as for our own use in manufacturing certain reinforcements and composite materials. Carbon fibers are also woven into carbon fabrics, used as reinforcement in conjunction with a resin matrix to produce pre-impregnated composite materials (referred to as “prepregs”). Carbon fiber is also used in filament winding to produce finished composite components. Key product applications include structural components for commercial and military aircraft, space launch vehicles, and certain other applications such as recreational and industrial equipment.
Fabrics, Multiaxials and Specialty Reinforcements: HexForce® fabrics, multiaxials and specialty reinforcements are made from a variety of fibers, including carbon, glass, aramid and other high strength polymers, quartz, ceramic and other specialty fibers. These reinforcements are used in the production of prepregs and other matrix materials used in primary and secondary structural aerospace applications such as wing components, horizontal and vertical stabilizer components, fairings, radomes and engine fan blades and cases, engine nacelles as well as overhead storage bins and other interior components. Our reinforcements are also used in the manufacture of a variety of industrial and recreational products such as wind energy blades, automotive components, oil exploration and production equipment, boats, surfboards, skis and other sporting goods equipment. Prepregs are applied via hand layup, automatic tape layup and advanced fiber placement to produce finished composite components.
Prepregs: HexPly® prepregs are manufactured for sale to third-party customers and for internal use by our Engineered Products segment in manufacturing composite laminates and monolithic structures, including finished components for aircraft structures and interiors. Prepregs are manufactured by combining high-performance reinforcement fabrics or unidirectional fibers with a resin matrix to form a composite material that, when cured, has exceptional structural properties not present in either of the constituent materials. Prepreg reinforcements include glass, carbon, aramid, quartz, ceramic and other specialty fibers. Resin matrices include bismaleimide, cyanate ester, epoxy, phenolic, polyimide and other specialty resins.
Other Fiber-Reinforced Matrix Materials: Fiber reinforced matrix developments include HexMC®, a form of quasi-isotropic carbon fiber prepreg that enables small to medium sized complex-shaped composite components to be mass produced. HexTOOL® is a specialized form of HexMC® for use in the cost-effective construction of high temperature resistant composite tooling. HexFIT® film infusion material is a product that combines resin films and dry fiber reinforcements to save lay-up time in production and enables the manufacture of large contoured composite structures, such as wind turbine blades.
3
Resins: HexFlow® polymer matrix materials are sold in liquid and film form for use in direct process manufacturing of composite parts. Resins can be combined with fiber reinforcements in manufacturing processes such as resin transfer molding (“RTM”), resin film infusion (“RFI”) or vacuum assisted resin transfer molding (“VARTM”) to produce high quality composite components for both aerospace and industrial applications, without the need for customer investment in autoclaves.
Structural Adhesives: We manufacture and market a comprehensive range of Redux® film and paste adhesives. These structural adhesives, which bond metal to metal and composites and honeycomb structures, are used in the aerospace industry and for many industrial applications.
Honeycomb: HexWeb® honeycomb is a lightweight, cellular structure generally composed of a sheet of nested hexagonal cells. It can also be manufactured in over-expanded and asymmetric cell configurations to meet special design requirements such as contours or complex curvatures. Honeycomb is primarily used as a lightweight core material and acts as a highly efficient energy absorber. When sandwiched between composite or metallic facing skins, honeycomb significantly increases the stiffness of the structure, while adding very little weight.
We produce honeycomb from a number of metallic and non-metallic materials. Most metallic honeycomb is made from aluminum and is available in a selection of alloys, cell sizes and dimensions. Non-metallic materials used in the manufacture of honeycomb include fiberglass, carbon fiber, thermoplastics, non-flammable aramid papers, aramid fiber and other specialty materials.
We sell honeycomb as standard blocks and in slices cut from a block. Honeycomb is also used in Acousti-Cap® where a non-metallic permeable cap material is embedded into honeycomb core that is used in aircraft engine nacelles to dramatically reduce noise during takeoff and landing without adding a structural weight penalty. Aerospace is the largest market for honeycomb products. In addition, we produce honeycomb for our Engineered Products segment for use in manufacturing finished parts for airframe Original Equipment Manufacturers (“OEMs”).
The following table identifies the key customers and the major manufacturing facilities of the Composite Materials segment:
COMPOSITE MATERIALS |
||||
KEY CUSTOMERS |
||||
Aernnova |
|
Daher |
|
Solvay |
Airbus Group |
|
Embraer |
|
Spirit Aerosystems |
Alliant Techsystems |
|
FACC |
|
Textron |
AVIC |
|
Finmeccanica |
|
Toray |
BMW |
|
General Electric |
|
Trek |
The Boeing Company |
|
GKN |
|
Triumph |
Bombardier |
|
Lockheed Martin |
|
United Technologies |
CFAN |
|
Nordam |
|
Vestas |
CFM International |
|
Northrop Grumman |
|
Zodiac |
CTRM Aero Composites |
|
Safran |
|
|
MAJOR MANUFACTURING FACILITIES |
||
Casa Grande, Arizona |
|
Neumarkt, Austria |
Dagneux, France |
|
Parla, Spain |
Decatur, Alabama |
|
Salt Lake City, Utah |
Duxford, England |
|
Seguin, Texas |
Illescas, Spain |
|
Stade, Germany |
Leicester, England |
|
Tianjin, China |
Les Avenieres, France |
|
Windsor, Colorado |
Nantes, France |
|
|
Net sales for the Composite Materials segment to third-party customers were $1,458.7 million in 2015, $1,420.9 million in 2014 and $1,286.9 million in 2013, which represented about 77% to 78%, of our net sales each year. Net sales for composite materials are highly dependent upon the number of large commercial aircraft produced as further discussed under the captions “Significant Customers”, “Markets” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations”. In addition, about 5% of our total production of composite materials in 2015 was used internally by the Engineered Products segment.
The Composites Materials segment in 2015 had a 50% ownership interest in a UK joint venture, Formax. The joint venture is a leading manufacturer of composite reinforcements, specializing in lightweight multi-axial fabrics. Formax had estimated revenues of $40 million in 2015. On January 5, 2016 we acquired the remaining 50% interest in Formax.
4
The Engineered Products segment manufactures and markets composite structures and precision machined honeycomb parts primarily for use in the aerospace industry. Composite structures are manufactured from a variety of composite and other materials, including prepregs, honeycomb, structural adhesives and advanced molding materials, using such manufacturing processes as autoclave processing, multi-axis numerically controlled machining, heat forming, compression molding and other composite manufacturing techniques.
The following table identifies the principal products and examples of the primary end-uses from the Engineered Products segment:
SEGMENT |
|
PRODUCTS |
|
PRIMARY END-USES |
ENGINEERED PRODUCTS |
|
Composite Structures |
|
● Aircraft structures and finished aircraft components, including wing to body fairings, wing panels, flight deck panels, door liners, helicopter blades, spars and tip caps |
|
|
|
|
|
|
|
Engineered Honeycomb |
|
● Aircraft structural sub-components and semi-finished components used in helicopter blades, engine nacelles, and aircraft surfaces (flaps, wings, elevators and fairings) |
|
|
|
|
|
|
|
HexMC® molded composite parts |
|
● Complex geometric parts for commercial aircraft to replace traditionally metal parts including window frames, primary structure brackets and fittings as well as for certain industrial applications |
|
|
|
|
|
|
|
HexTOOL® Tooling |
|
·Mold tools made from carbon fiber and high temperature resistant BMI resin. Used in the manufacture of composite aircraft structures, providing a lower weight, easier to handle alternative to traditional metal tooling. |
Net sales for the Engineered Products segment to third-party customers were $402.5 million in 2015, $434.6 million in 2014, and $391.3 million in 2013, which represented about 22% to 23% of our net sales each year.
The Engineered Products segment has a 50% ownership interest in a Malaysian joint venture, Aerospace Composites Malaysia Sdn. Bhd. (“ACM”) with Boeing Worldwide Operations Limited. Under the terms of the joint venture agreement, Hexcel and The Boeing Company (“Boeing”) have transferred the manufacture of certain semi-finished composite components to this joint venture. Hexcel purchases the semi-finished composite components from the joint venture, and inspects and performs additional skilled assembly work before delivering them to Boeing. The joint venture also manufactures composite components for other aircraft component manufacturers. ACM had revenue of $69 million in 2015, and $64 million and $62 million in 2014 and 2013, respectively.
In January 2016, the Company announced it will expand its global engineered honeycomb capacity by building a manufacturing plant in Casablanca, Morocco.
The following table identifies the key customers and the major manufacturing facilities of the Engineered Products segment:
ENGINEERED PRODUCTS |
||
KEY CUSTOMERS |
|
MAJOR |
The Boeing Company |
|
Burlington, Washington |
Bombardier |
|
Kent, Washington |
CTRM Aero Composites |
|
Pottsville, Pennsylvania |
General Electric |
|
Welkenraedt, Belgium |
GKN |
|
Alor Setar, Malaysia (JV) |
Sikorsky, a Lockheed Martin Company |
|
|
Spirit Aerosystems |
|
|
United Technologies |
|
|
5
Financial Information About Segments and Geographic Areas
Financial information and further discussion of our segments and geographic areas, including external sales and long-lived assets, are contained under the caption “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and in Note 16 to the accompanying consolidated financial statements of this Annual Report on Form 10-K.
Significant Customers
Approximately 35%, 31% and 29% of our 2015, 2014 and 2013 net sales, respectively, were to Airbus Group and its subcontractors. Of the 35% of overall sales to Airbus Group and its subcontractors in 2015, 31% related to Commercial Aerospace market applications and 4% related to Space & Defense market applications. Approximately 31%, 32% and 34% of our 2015, 2014 and 2013 net sales, respectively, were to Boeing and related subcontractors. Of the 31% of overall sales to Boeing and its subcontractors in 2015, 29% related to Commercial Aerospace market applications and 2% related to Space & Defense market applications.
Markets
Our products are sold for a broad range of end-uses. The following tables summarize our net sales to third-party customers by market and by geography for each of the three years ended December 31:
|
|
2015 |
|
|
2014 |
|
|
2013 |
|
|||
Net Sales by Market |
|
|
|
|
|
|
|
|
|
|
|
|
Commercial Aerospace |
|
|
69 |
% |
|
|
66 |
% |
|
|
65 |
% |
Space & Defense |
|
|
18 |
|
|
|
20 |
|
|
|
22 |
|
Industrial |
|
|
13 |
|
|
|
14 |
|
|
|
13 |
|
Total |
|
|
100 |
% |
|
|
100 |
% |
|
|
100 |
% |
Net Sales by Geography (a) |
|
|
|
|
|
|
|
|
|
|
|
|
United States |
|
|
51 |
% |
|
|
50 |
% |
|
|
52 |
% |
Europe and China |
|
|
49 |
|
|
|
50 |
|
|
|
48 |
|
Total |
|
|
100 |
% |
|
|
100 |
% |
|
|
100 |
% |
|
(a) |
Net sales by geography based on the location in which the product sold was manufactured. |
|
|
2015 |
|
|
2014 |
|
|
2013 |
|
|||
Net Sales to External Customers (b) |
|
|
|
|
|
|
|
|
|
|
|
|
United States |
|
|
46 |
% |
|
|
45 |
% |
|
|
46 |
% |
Europe |
|
|
37 |
|
|
|
39 |
|
|
|
39 |
|
All Others |
|
|
17 |
|
|
|
16 |
|
|
|
15 |
|
Total |
|
|
100 |
% |
|
|
100 |
% |
|
|
100 |
% |
|
(b) |
Net sales to external customers based on the location to which the product sold was delivered. |
Commercial Aerospace
The Commercial Aerospace industry is our largest user of advanced composites. Commercial Aerospace represented 69% of our 2015 net sales. Approximately 87% of these revenues can be identified as sales to Airbus, Boeing and their subcontractors for the production of commercial aircraft. The remaining 13% of these revenues were for regional and business aircraft. The economic benefits airlines can obtain from weight savings in both fuel economy and aircraft range, combined with the design enhancement that comes from the advantages of advanced composites over traditional materials, have caused the industry to be the leader in the use of these materials. While military aircraft and spacecraft have championed the development of these materials, Commercial Aerospace has had the greater production volumes and has commercialized the use of these products. Accordingly, the demand for advanced structural material products is closely correlated to the demand for new commercial aircraft.
The use of advanced composites in Commercial Aerospace is primarily in the manufacture of new commercial aircraft. The aftermarket for these products is very small as many of these materials are designed to last for the life of the aircraft. The demand for new commercial aircraft is driven by two principal factors, the first of which is airline passenger traffic (the number of revenue passenger miles flown by the airlines) which affects the required size of airline fleets. The International Air Transport Association (IATA) estimates 2015 revenue passenger miles were 6.5% higher than 2014. Growth in passenger traffic requires growth in the size of the fleet of commercial aircraft operated by airlines worldwide.
6
A second factor, which is less sensitive to the general economy, is the replacement rates for existing aircraft. The rates of retirement of passenger and freight aircraft, resulting mainly from obsolescence, are determined in part by the regulatory requirements established by various civil aviation authorities worldwide as well as public concern regarding aircraft age, safety and noise. These rates may also be affected by the desire of the various airlines to improve operating costs with higher payloads and more fuel-efficient aircraft (which in turn is influenced by the price of fuel) and by reducing maintenance expense. In addition, there is expected to be increasing pressure on airlines to replace their aging fleet with more fuel efficient and quieter aircraft to be more environmentally responsible. When aircraft are retired from commercial airline fleets, they may be converted to cargo freight aircraft or scrapped.
An additional factor that may cause airlines to defer or cancel orders is their ability to obtain financing, including leasing, for new aircraft orders. This will be dependent both upon the financial health of the airline operators, as well as the overall availability of financing in the marketplace.
Each new generation of commercial aircraft has used increasing quantities of advanced composites, replacing metals. This follows the trend previously seen in military fighter aircraft where advanced composites may now exceed 50% of the weight of the airframe. Early versions of commercial jet aircraft, such as the Boeing 707, which was developed in the early 1950’s, contained almost no composite materials. One of the first commercial aircraft to use a meaningful amount of composite materials, the Boeing 767 entered into service in 1983, and was built with an airframe containing approximately 6% composite materials. The airframe of Boeing’s 777 aircraft, which entered service in 1995, is approximately 11% composite. The Airbus A380, which was first delivered in 2007, has approximately 23% composite content by weight. Boeing’s latest aircraft, the B787, which entered into service in 2011, has a content of more than 50% composite materials by weight. The Airbus A350 XWB (“A350”) which has a composite content of 53% by weight was first delivered in December 2014. In 2011, both Airbus and Boeing announced new versions of their narrow body aircraft which will have new engines. Airbus’s A320neo entered service in January 2016 and Boeing’s B737 MAX is expected to enter service in 2017. In 2014, Airbus announced a new version of its A330, the A330neo, which will have new engines, and Boeing announced the B777X, a new version of the B777 with composite wings and new engines. It is expected that these new aircraft will offer more opportunities for composite materials than their predecessors, as the Commercial Aerospace industry continues to utilize a greater proportion of advanced composite materials with each new generation of aircraft. We refer to this steady expansion of the use of composites in aircraft as the “secular penetration of composites” as it increases our average sales per airplane over time.
The impact on Hexcel of Airbus and Boeing’s production rate changes is typically influenced by two factors: the mix of aircraft produced and the inventory supply chain effects of increases or reductions in aircraft production. We have products on all Airbus and Boeing planes. The dollar value of our materials varies by aircraft type — twin aisle aircraft use more of our materials than narrow body aircraft and newer designed aircraft use more of our materials than older generations. On average, for established programs, we deliver products into the supply chain about six months prior to aircraft delivery, with a range between one and eighteen months depending on the product. For aircraft that are in the development or ramp-up stage, such as the A320neo, B737 MAX, A330neo and the B777X, we will have sales as much as several years in advance of the delivery. Increased aircraft deliveries combined with the secular penetration of composites resulted in our Commercial Aerospace revenues increasing, year over year, by approximately 6% (7.6% in constant currency) in 2015 and 12% in 2014 and 15% in 2013.
Set forth below are historical aircraft deliveries as announced by Airbus and Boeing:
|
|
|
2001 |
|
2002 |
|
2003 |
|
2004 |
|
2005 |
|
2006 |
|
2007 |
|
2008 |
|
2009 |
|
2010 |
|
2011 |
|
2012 |
|
2013 |
|
2014 |
|
2015 |
Airbus |
|
|
325 |
|
303 |
|
305 |
|
320 |
|
378 |
|
434 |
|
453 |
|
483 |
|
498 |
|
510 |
|
534 |
|
588 |
|
626 |
|
629 |
|
635 |
Boeing |
|
|
527 |
|
381 |
|
281 |
|
285 |
|
290 |
|
398 |
|
441 |
|
375 |
|
481 |
|
462 |
|
477 |
|
601 |
|
648 |
|
723 |
|
762 |
Total |
|
|
852 |
|
684 |
|
586 |
|
605 |
|
668 |
|
832 |
|
894 |
|
858 |
|
979 |
|
972 |
|
1,011 |
|
1,189 |
|
1,274 |
|
1,352 |
|
1,397 |
Approximately 87% of our Commercial Aerospace revenues can be identified as sales to Airbus, Boeing and their subcontractors for the production of commercial aircraft. Airbus and Boeing combined deliveries in 2015 were 1,397 aircraft, surpassing the previous high of 1,352 in 2014. Based on Airbus and Boeing public estimates, the combined deliveries in 2016 are expected to be about the same as 2015. In 2015, the combined net orders reported by Airbus and Boeing were for 1,804 planes, bringing their backlog at December 31, 2015 to 12,582 planes – the highest in history. The balance of our Commercial Aerospace sales is related to regional and business aircraft manufacture, and other commercial aircraft applications. These applications also exhibit increasing utilization of composite materials with each new generation of aircraft.
Space & Defense
The Space & Defense market has historically been an innovator in the use of, and source of significant demand for, advanced composites. The aggregate demand by Space & Defense customers is primarily a function of procurement of military aircraft that utilize advanced composites by the United States and certain European governments, as well as that we include both commercial and
7
military helicopters in this market. We are currently qualified to supply materials to a broad range of over 100 helicopter, military aircraft and space programs. The top ten programs by revenues represent about 56% of our Space & Defense revenues and no one program exceeds 15% of our revenues in this market. Rotorcraft (commercial and military) accounted for less than 55% of Space & Defense sales in 2015. Key programs include the V-22 (Osprey) tilt rotor aircraft, A400M military transport, F-35 (joint strike fighter or JSF), Blackhawk, AH-64 Apache, European Fighter Aircraft (Typhoon), S76, C-130, F/A-18E/F (Hornet), CH-53 Super Stallion, and Tiger helicopters. The sales that we obtain from these programs will depend upon which are funded and the extent of such funding. Space applications for advanced composites include solid rocket booster cases, fairings and payload doors for launch vehicles, and buss and solar arrays for military and commercial satellites.
Another trend providing positive growth for Hexcel is the further penetration of composites in helicopter blades. Numerous new helicopter programs in development, as well as upgrade or retrofit programs, have an increased reliance on Composite Materials products such as carbon fiber, prepregs, and honeycomb core to improve blade performance. In addition, our Engineered Products segment provides specialty value added services such as machining, sub-assembly, and even full blade manufacturing.
Contracts for military and some commercial programs may contain provisions applicable to both U.S. Government contracts and subcontracts. For example, a prime contractor may flow down a “termination for convenience” clause to materials suppliers such as Hexcel. According to the terms of a contract, we may be subject to U.S. government Federal Acquisition Regulations, the Department of Defense Federal Acquisition Regulations Supplement, and associated procurement regulations.
Industrial Markets
The revenue for this market includes wind turbine blades, automotive, a wide variety of recreational products and other industrial applications. A number of these applications represent emerging opportunities for our products. In developing new applications, we seek those opportunities where advanced composites technology offers significant benefits to the end user, often applications that demand high engineering performance. Within the Industrial Markets, wind energy comprises over 50% of the sales and our primary customer is Vestas Wind Systems A/S. The Industrial Markets also include sales to major end user sub-markets, in order of size based on our 2015 sales, general industrial applications (including those sold through distributors), recreational equipment (e.g., skis and snowboards, bicycles and hockey sticks), and transportation (e.g., automobiles, mass transit and high-speed rail, and marine applications). Our participation in Industrial Market applications complements our commercial and military aerospace businesses, and in many instances, technology or products now used in aerospace were started in Industrial. We are committed to pursuing the utilization of advanced structural material technology where it can generate significant value and we can maintain a sustainable competitive advantage.
Further discussion of our markets, including certain risks, uncertainties and other factors with respect to “forward-looking statements” about those markets, is contained under the captions “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Risk Factors”.
Backlog
In recent years, our customers have demanded shorter order lead times and “just-in-time” delivery performance. While we have many multi-year contracts with our major aerospace customers, most of these contracts specify the proportion of the customers’ requirements that will be supplied by us and the terms under which the sales will occur, not the specific quantities to be procured. Our Industrial customers have always desired to order their requirements on as short a lead-time as possible. As a result, twelve-month order backlog is not a meaningful trend indicator for us. As noted above, our Commercial Aerospace sales to Airbus and Boeing and their subcontractors accounted for 60% of our total 2015 sales, and they have backlogs of 12,582 airplanes, or about nine years based on 2015 deliveries.
Raw Materials and Production Activities
Our manufacturing operations are in many cases vertically integrated. We produce and internally utilize carbon fibers, industrial fabrics, composite materials and composite structures as well as sell these materials to third-party customers for their use in the manufacture of their products.
We manufacture high performance carbon fiber from polyacrylonitrile precursor (“PAN”). The primary raw material for PAN is acrylonitrile. All of the PAN we produce is for internal carbon fiber production. We consume approximately more than 70% by value of the carbon fiber we produce and sell the remainder of our output to third-party customers. However, as one of the world’s largest consumers of high performance carbon fiber, we also purchase significant quantities of carbon fiber from external sources for our own use. The sources of carbon fiber we can use in any product or application are generally dictated by customer qualifications or certifications. Otherwise, we select a carbon fiber based on performance, price and availability. With the increasing demand for carbon
8
fiber, particularly in aerospace applications, we have tripled our PAN and carbon fiber capacity since 2007 to serve the growing needs of our customers and our own downstream products and we are continuing to expand our capacity to meet our customers’ forecasted requirements. After a new production line starts operating, it can take up to a year to be certified for aerospace qualifications. However, these lines can start supplying carbon fiber for many industrial applications within a shorter time period.
We purchase glass yarn from a number of suppliers in the United States, Europe and Asia. We also purchase aramid and high strength fibers which are produced by only a few companies, and during periods of high demand, can be in short supply. In addition, epoxy and other specialty resins, aramid paper and aluminum specialty foils are used in the manufacture of composite products. A number of these products have only one or two sources qualified for use, so an interruption in their supply could disrupt our ability to meet our customer requirements. When entering into multi-year contracts with aerospace customers, we attempt to get back-to-back commitments from key raw material suppliers.
Our manufacturing activities are primarily based on “make-to-order”, or “demand pull” based on customer schedules, and to a lesser extent, “make-to-forecast” production requirements. We coordinate closely with key suppliers in an effort to avoid raw material shortages and excess inventories. However, many of the key raw materials we consume are available from relatively few sources, and in many cases the cost of product qualification makes it impractical to develop multiple sources of supply. The lack of availability of these materials could under certain circumstances have a material adverse effect on our consolidated results of operations.
Research and Technology; Patents and Know-How
Research and Technology (“R&T”) departments support our businesses worldwide. Through R&T activities, we maintain expertise in precursor and carbon fiber, chemical and polymer formulation and curatives, fabric forming and textile architectures, advanced composite structures, process engineering, application development, analysis and testing of composite materials, computational design, and other scientific disciplines related to our worldwide business base.
Our products rely primarily on our expertise in materials science, textiles, process engineering and polymer chemistry. Consistent with market demand, we have been placing more emphasis on higher performing products and cost effective production processes while seeking to improve the consistency of our products and our capital efficiency. Towards this end, we have entered into formal and informal alliances, as well as licensing and teaming arrangements, with several customers, suppliers, external agencies and laboratories. We believe that we possess unique capabilities to design, develop, manufacture and qualify composite materials and structures. We have over 1,300 patents and pending applications worldwide, and have granted technology licenses and patent rights to several third parties primarily in connection with joint ventures and joint development programs. It is our policy to actively enforce our proprietary rights. We believe that the patents and know-how rights currently owned or licensed by Hexcel are adequate for the conduct of our business. We do not believe that our business would be materially affected by the expiration of any single patent or series of related patents, or by the termination of any single license agreement or series of related license agreements.
We spent $44.3 million, $47.9 million and $41.7 million for R&T in 2015, 2014 and 2013, respectively. Our 2015 spending was 7.5% lower than 2014, but on a constant currency basis spending was about the same as 2014. Our spending on a quarter to quarter basis fluctuates depending upon the amount of new product development and qualification activities, particularly in relation to commercial aircraft applications, that are in progress. These expenditures are expensed as incurred.
Environmental Matters
We are subject to federal, state, local and foreign laws and regulations designed to protect the environment and to regulate the discharge of materials into the environment. We believe that our policies, practices, and procedures are properly designed to prevent unreasonable risk of environmental damage and associated financial liability. To date, environmental control regulations have not had a significant adverse effect on our overall operations.
Our aggregate environmental related accruals at December 31, 2015 and 2014 were $2.9 million and $5.0 million, respectively. As of December 31, 2015 and December 31, 2014, $1.1 million and $3.2 million, respectively, were included in “Other current accrued liabilities”, with the remainder included in “Other non-current liabilities”. As related to certain of our environmental matters, except for the Lodi, New Jersey site, our accruals were estimated at the low end of a range of possible outcomes since there was no better point within the range. If we had accrued, for those sites where we are able to estimate our liability, at the high end of the range of possible outcomes, our accruals would have been $28 million higher at December 31, 2015 and 2014. Environmental remediation spending charged directly to our reserve balance for 2015, 2014 and 2013, was $2.6 million, $4.9 million and $3.6 million, respectively. In addition, our operating costs relating to environmental compliance were $10.7 million, $14.2 million and $13.5 million, for 2015, 2014, and 2013, respectively, and were charged directly to expense. Capital expenditures for environmental matters approximated $7.1 million, $7.3 million and $4.6 million for 2015, 2014 and 2013 respectively.
9
These accruals can change significantly from period to period due to such factors as additional information on the nature or extent of contamination, the methods of remediation required, changes in the apportionment of costs among responsible parties and other actions by governmental agencies or private parties, as well as the impact, if any, of Hexcel being named in a new matter. A discussion of environmental matters is contained in Item 3, “Legal Proceedings,” and in Note 13 to the accompanying consolidated financial statements included in this Annual Report on Form 10-K.
Sales and Marketing
A staff of salaried marketing managers, product managers and sales personnel, sell and market our products directly to customers worldwide. We also use independent distributors and manufacturer representatives for certain products, markets and regions. In addition, we operate various sales representation offices in the Americas, Europe, Asia Pacific and Russia.
Competition
In the production and sale of advanced composites, we compete with a number of U.S. and international companies on a worldwide basis. The broad markets for composites are highly competitive, and we have focused on both specific submarkets and specialty products within markets. In addition to competing directly with companies offering similar products, we compete with producers of substitute composites such as structural foam, infusion technology, wood and metal. Depending upon the material and markets, relevant competitive factors include approvals, database of usage, technology, product performance, delivery, service, price, customer preference for sole sourcing and customer preferred processes.
Employees
As of December 31, 2015, we employed 5,897 full-time employees and contract workers, 3,394 in the United States and 2,503 in other countries. Of the 5,897 full-time employees, approximately 18% were represented by collective bargaining agreements. We believe that our relations with employees and unions are good. The number of full-time employees and contract workers as of December 31, 2014 and 2013 was 5,663 and 5,274, respectively.
Other Information
Our internet website is www.hexcel.com. We make available, free of charge through our website, our Form 10-Ks, 10-Qs and 8-Ks, and any amendments to these forms, as soon as reasonably practicable after filing with the Securities and Exchange Commission.
ITEM 1A. Risk Factors
An investment in our common stock or debt securities involves risks and uncertainties. You should consider the following risk factors carefully, in addition to the other information contained in this Annual Report on Form 10-K, before deciding to purchase any of our securities.
The markets in which we operate can be cyclical, and downturns in them may adversely affect the results of our operations.
Some of the markets in which we operate have been, to varying degrees, cyclical and have experienced downturns. A downturn in these markets could occur at any time as a result of events that are industry specific or macroeconomic and in the event of a downturn; we have no way of knowing if, when and to what extent there might be a recovery. Any deterioration in any of the cyclical markets we serve could adversely affect our financial performance and operating results.
At December 31, 2015, Airbus and Boeing had a combined backlog of 12,582 aircraft, which is the highest in history and about nine years of production at 2015 delivery rates. To the extent any significant deferrals, cancellations or reduction in demand results in decreased aircraft build rates, it would reduce net sales for our Commercial Aerospace products and as a result reduce our operating income. Approximately 69% of our net sales for 2015 were derived from sales to the Commercial Aerospace industry, which includes 87% from Airbus and Boeing aircraft and 13% from regional and business aircraft. Reductions in demand for commercial aircraft or a delay in deliveries could result from many factors, including delays in the startup or ramp-up of new programs, changes in the propensity for the general public to travel by air (including as a result of terrorist events and any subsequent military response), a significant change in the cost of aviation fuel, a change in technology resulting in the use of alternative materials, consolidation and liquidation of airlines, availability of funding for new aircraft purchases or leases, inventory corrections or disruptions throughout the supply chain and slower macroeconomic growth.
10
The A350 had its first customer delivery in December 2014. Our content per plane is approximately $5 million and we expect the A350 will be our largest program with sales of approximately $600 million per year when Airbus reaches its projected buildrates of 120 per year. Both Airbus and Boeing have experienced various delays in their newest aircraft programs, including the A380, B787, B747-8, A400M, and A350. In the past, these have delayed our expected growth or our effective utilization of capacity installed for such growth. Future delays in these or other major new customer programs could similarly impact our results.
In addition, our customers continue to emphasize the need for cost reduction or other improvements in contract terms throughout the supply chain. In response to these pressures, we may be required to accept increased risk or face the prospects of margin compression on some products in the future. Where possible, we seek to offset or mitigate the impact of such pressures through productivity and performance improvements, index clauses, currency hedging and other actions.
A significant decline in business with Airbus, Boeing, Vestas, or other significant customers could materially impact our business, operating results, prospects and financial condition.
We have concentrated customers in the Commercial Aerospace and wind energy markets. In the Commercial Aerospace market, approximately 87%, and in the Space & Defense market, approximately 35%, of our 2015 net sales were made to Airbus Group and Boeing and their related subcontractors. For the years ended December 31, 2015 and December 31, 2014, approximately 35% and 31% of our total consolidated net sales, respectively, were to Airbus, and its related subcontractors and approximately 31% and 32% of our total consolidated net sales were to Boeing and its related subcontractors, respectively. In the wind energy market, our primary customer is Vestas. Significant changes in the demand for our customers’ end products, program delays, the share of their requirements that is awarded to us or changes in the design or materials used to construct their products could result in a significant loss of business with these customers. The loss of, or significant reduction in purchases by Airbus, Boeing and Vestas or any of our other significant customers could materially impair our business, operating results, prospects and financial condition. The level of purchases by our customers is often affected by events beyond their control, including general economic conditions, demand for their products, business disruptions, disruptions in deliveries, strikes and other factors.
A decrease in supply, interruptions at key facilities or an increase in cost of raw materials could result in a material decline in our profitability.
Our profitability depends largely on the price and continuity of supply of raw materials, which may be supplied through a sole source or a limited number of sources. We purchase large volumes of raw materials, such as epoxy and phenolic resins, carbon fiber, fiberglass yarn, aluminum foil and aramid paper. Any restrictions on the supply, or an increase in the cost, of our raw materials could significantly reduce our profit margins. Efforts to mitigate restrictions on the supply or price increases of these raw materials by long-term purchase agreements, productivity improvements or by passing cost increases to our customers may not be successful.
The occurrence of material operational problems, including but not limited to failure of, or interruption to, key equipment or natural disasters, or inability to install, staff and qualify necessary capacity, achievement of planned manufacturing improvements, or inability to meet customer specifications, may have a material adverse effect on the productivity and profitability of a particular manufacturing facility. With respect to certain facilities, such events could have a material effect on our company as a whole.
Reductions in space and defense spending could result in a decline in our net sales.
Space and defense production that has occurred in recent years may not be sustained, individual programs important to Hexcel may be cancelled, production may not continue to grow and the increased demand for composite-intensive programs may not continue. In addition, the production of military aircraft depends upon defense budgets and the related demand for defense and related equipment. Approximately 18% of our net sales in 2015 were to the Space & Defense market of which about 85% were related to military programs in the United States and other countries.
We have substantial international operations subject to uncertainties which could affect our operating results.
We believe that revenue from sales outside the U.S. will continue to account for a material portion of our total revenue for the foreseeable future. In 2015, 49% of our production and 54% of our customer sales occurred outside of the United States. Additionally, we have invested significant resources in our international operations and we intend to continue to make such investments in the future. Our international operations are subject to numerous risks, including: (a) general economic and political conditions in the countries where we operate may have an adverse effect on our operations in those countries or not be favorable to our growth strategy; (b) the difficulty of enforcing agreements and collecting receivables through some foreign legal systems; (c) foreign customers may have longer payment cycles than customers in the U.S.; (d) cost of compliance with international trade laws of all of the countries in which we do business, including export control laws, relating to sales and purchases of goods and equipment and transfers of technology; (e) tax rates may vary and foreign earnings may be subject to withholding requirements or the imposition of tariffs,
11
exchange controls or other restrictions; (f) governments may adopt regulations or take other actions that would have a direct or indirect adverse impact on our business and market opportunities; and (g) the potential difficulty in enforcing our intellectual property rights in some foreign countries, and the potential for the intellectual property rights of others to affect our ability to sell product in certain markets. Any one of these could adversely affect our financial condition and results of operations.
In addition, fluctuations in currency exchange rates may influence the profitability and cash flows of our business. For example, our European operations sell a portion of the products they produce in U.S. dollars, yet the labor, overhead costs and portions of material costs incurred in the manufacture of those products are primarily denominated in Euros, British pounds sterling or U.S. dollars. As a result, the local currency margins of goods manufactured with costs denominated in local currency, yet sold in U.S. dollars, will vary with fluctuations in currency exchange rates, reducing when the U.S. dollar weakens against the Euro and British pound sterling. In addition, the reported U.S. dollar value of the local currency financial statements of our foreign subsidiaries will vary with fluctuations in currency exchange rates. While we enter into currency exchange and hedge agreements from time to time to mitigate these types of fluctuations, we cannot remove all fluctuations or hedge all exposures, and our earnings are impacted by changes in currency exchange rates.
We currently do not have political risk insurance in the countries in which we conduct business. While we carefully consider these risks when evaluating our international operations we cannot provide assurance that we will not be materially adversely affected as a result of such risks.
We could be adversely affected by environmental and safety requirements.
Our operations require the handling, use, storage and disposal of certain regulated materials and wastes. As a result, we are subject to various laws and regulations pertaining to pollution and protection of the environment, health and safety. These requirements govern, among other things, emissions to air, discharge to waters and the generation, handling, storage, treatment and disposal of waste and remediation of contaminated sites. We have made, and will continue to make, capital and other expenditures in order to comply with these laws and regulations. These laws and regulations are complex, change frequently and could become more stringent in the future.
We have been named as a “potentially responsible party” under the U.S. Superfund law or similar state laws at several sites requiring clean up. These laws generally impose liability for costs to investigate and remediate contamination without regard to fault. Under certain circumstances liability may be joint and several, resulting in one responsible party being held responsible for the entire obligation. Liability may also include damages to natural resources. We have incurred and likely will continue to incur expenses to investigate and clean up certain of our existing and former facilities, for which we believe we have adequate reserves. The ongoing operation of our manufacturing plants also entails environmental risks, and we may incur material costs or liabilities in the future which could adversely affect us. Although most of our properties have been the subject of environmental site assessments, there can be no assurance that all potential instances of soil and groundwater contamination have been identified, even at those sites where assessments have been conducted. Accordingly, we may discover previously unknown environmental conditions and the cost of remediating such conditions may be material. See “Legal Proceedings” below and Note 13 to the consolidated financial statements included elsewhere in this Annual Report on Form 10-K.
In addition, we may be required to comply with evolving environmental, health and safety laws, regulations or requirements that may be adopted or imposed in the future or to address newly discovered information or conditions that require a response. In particular, climate change is receiving increased attention worldwide, which has led to significant legislative and regulatory efforts to limit greenhouse gas emissions. The U.S. Congress has considered climate change-related legislation and may retake the issue in the near future. Specific policy measures could include cap and trade provisions or a carbon tax. The European Union has instituted the Greenhouse Gas Emission Trading System (EU-ETS). Our manufacturing plants use energy, including electricity and natural gas, and some of our plants may in the future emit amounts of greenhouse gas that could be affected by these legislative and regulatory efforts. Potential consequences could include increased energy, transportation and raw material costs and may require the Company to make additional investments in its facilities and equipment or limit our ability to grow.
Our forward-looking statements and projections may turn out to be inaccurate.
This Form 10-K includes forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. These statements relate to analyses and other information that are based on forecasts of future results and estimates of amounts not yet determinable. These statements also relate to future prospects, developments and business strategies. These forward-looking statements are identified by their use of terms and phrases such as “anticipate”, “believe”, “could”, “estimate”, “expect”, “intend”, “may”, “plan”, “predict”, “project”, “should”, “would”, “will” and similar terms and phrases, including references to assumptions. Such statements are based on current expectations, are inherently uncertain, and are subject to changing assumptions.
12
Such forward-looking statements include, but are not limited to: (a) the estimates and expectations based on aircraft production rates made publicly available by Airbus and Boeing; (b) the revenues we may generate from an aircraft model or program; (c) the impact of the possible push-out in deliveries of the Airbus and Boeing backlog and the impact of delays in the startup or ramp-up of new aircraft programs or the final Hexcel composite material content once the design and material selection has been completed; (d) expectations of composite content on new commercial aircraft programs and our share of those requirements; (e) expectations of growth in revenues from space and defense applications, including whether certain programs might be curtailed or discontinued; (f) expectations regarding growth in sales for wind energy, recreation, automotive and other industrial applications; (g) expectations regarding working capital trends and expenditures; (h) expectations as to the level of capital expenditures and when we will complete the construction and qualification of capacity expansions; (i) our ability to maintain and improve margins in light of the ramp-up of capacity and new facilities and the current economic environment; (j) the outcome of legal matters; (k) our projections regarding the realizability of net operating loss and tax credit carryforwards; and (l) the impact of various market risks, including fluctuations in interest rates, currency exchange rates, environmental regulations and tax codes, fluctuations in commodity prices, and fluctuations in the market price of our common stock, the impact of work stoppages or other labor disruptions and the impact of the above factors on our expectations of 2016 financial results and beyond. In addition, actual results may differ materially from the results anticipated in the forward looking statements due to a variety of factors, including but not limited to changing market conditions, increased competition, product mix, inability to achieve planned manufacturing improvements or to meet customer specifications, cost reductions and capacity additions, and conditions in the financial markets.
Such forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause actual results to be materially different. Such factors include, but are not limited to, the following: changes in general economic and business conditions; changes in current pricing and cost levels; changes in political and social conditions, and local regulations; foreign currency fluctuations; changes in aerospace delivery rates; reductions in sales to any significant customers, particularly Airbus Group, Boeing or Vestas; changes in sales mix; changes in government defense procurement budgets; changes in military aerospace programs technology; industry capacity; competition; disruptions of established supply channels, particularly where raw materials are obtained from a single or limited number of sources and cannot be substituted by unqualified alternatives; manufacturing capacity constraints; unforeseen vulnerability of our network and systems to interruptions or failures; and the availability, terms and deployment of capital.
If one or more of these risks or uncertainties materialize, or if underlying assumptions prove incorrect, actual results may vary materially from those expected, estimated or projected. In addition to other factors that affect our operating results and financial position, neither past financial performance nor our expectations should be considered reliable indicators of future performance. Investors should not use historical trends to anticipate results or trends in future periods. Further, our stock price is subject to volatility. Any of the factors discussed above could have an adverse impact on our stock price. In addition, failure of sales or income in any quarter to meet the investment community’s expectations, as well as broader market trends, can have an adverse impact on our stock price. We do not undertake an obligation to update our forward-looking statements or risk factors to reflect future events or circumstances.
ITEM 1B. Unresolved Staff Comments
None.
13
We own and lease manufacturing facilities and sales offices located throughout the United States and in other countries, as noted below. The corporate offices and principal corporate support activities are located in leased facilities in Stamford, Connecticut. Our research and technology administration and principal laboratories are located in Dublin, California; Duxford, England; Les Avenieres, France; Salt Lake City, Utah and Decatur, Alabama.
The following table lists our manufacturing facilities by geographic location, related segment, and principal products manufactured. This table does not include manufacturing facilities owned by joint ventures.
Manufacturing Facilities
Facility Location |
|
Segment |
|
Principal Products |
United States: |
|
|
|
|
Burlington, Washington |
|
Engineered Products |
|
Engineered Honeycomb Parts |
Casa Grande, Arizona |
|
Composite Materials |
|
Honeycomb and Honeycomb Parts |
Decatur, Alabama |
|
Composite Materials |
|
PAN Precursor (used to produce Carbon Fibers) |
Kent, Washington |
|
Engineered Products |
|
Composite structures |
Pottsville, Pennsylvania |
|
Engineered Products |
|
Engineered Honeycomb Parts |
Salt Lake City, Utah |
|
Composite Materials |
|
Carbon Fibers; Prepregs |
Seguin, Texas |
|
Composite Materials |
|
Industrial Fabrics; Specialty Reinforcements |
Windsor, Colorado |
|
Composite Materials |
|
Prepregs |
International: |
|
|
|
|
Dagneux, France |
|
Composite Materials |
|
Prepregs |
Duxford, England |
|
Composite Materials |
|
Prepregs; Adhesives; Honeycomb and Honeycomb Parts |
Illescas, Spain |
|
Composite Materials |
|
Carbon Fibers |
Leicester, England |
|
Composite Materials |
|
Lightweight Multiaxials Fabrics |
Les Avenieres, France |
|
Composite Materials |
|
Industrial Fabrics; Specialty Reinforcements |
Nantes, France |
|
Composite Materials |
|
Prepregs |
Neumarkt, Austria |
|
Composite Materials |
|
Prepregs |
Parla, Spain |
|
Composite Materials |
|
Prepregs |
Stade, Germany |
|
Composite Materials |
|
Prepregs |
Tianjin, China |
|
Composite Materials |
|
Prepregs |
Welkenraedt, Belgium |
|
Engineered Products |
|
Engineered Honeycomb Parts |
We lease the land and buildings in Nantes, France and Tianjin, China; and the land on which the Burlington, Washington facility is located. We also lease portions of the facilities located in Casa Grande, Arizona, Pottsville, Pennsylvania and Kent, Washington. We own all other remaining facilities. For further information, refer to “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and to Note 6 to the accompanying consolidated financial statements of this Annual Report on Form 10-K.
ITEM 3. Legal Proceedings
We are involved in litigation, investigations and claims arising out of the normal conduct of our business, including those relating to commercial transactions, environmental, employment and health and safety matters. We estimate and accrue our liabilities resulting from such matters based on a variety of factors, including the stage of the proceeding; potential settlement value; assessments by internal and external counsel; and assessments by environmental engineers and consultants of potential environmental liabilities and remediation costs. Such estimates are not discounted to reflect the time value of money due to the uncertainty in estimating the timing of the expenditures, which may extend over several years.
While it is impossible to ascertain the ultimate legal and financial liability with respect to certain contingent liabilities and claims, we believe, based upon our examination of currently available information, our experience to date, and advice from legal counsel, that the individual and aggregate liabilities resulting from the ultimate resolution of these contingent matters, after taking into consideration our existing insurance coverage and amounts already provided for, will not have a material adverse impact on our consolidated results of operations, financial position or cash flows.
14
We are subject to various U.S. and international federal, state and local environmental, and health and safety laws and regulations. We are also subject to liabilities arising under the Federal Comprehensive Environmental Response, Compensation and Liability Act (“CERCLA” or “Superfund”), the Clean Air Act, the Clean Water Act, the Resource Conservation and Recovery Act, and similar state and international laws and regulations that impose responsibility for the control, remediation and abatement of air, water and soil pollutants and the manufacturing, storage, handling and disposal of hazardous substances and waste.
We have been named as a potentially responsible party (“PRP”) with respect to several hazardous waste disposal sites that we do not own or control, which are included on, or proposed to be included on, the Superfund National Priority List of the U.S. Environmental Protection Agency (“EPA”) or on equivalent lists of various state governments. Because CERCLA allows for joint and several liability in certain circumstances, we could be responsible for all remediation costs at such sites, even if we are one of many PRPs. We believe, based on the amount and nature of our waste, and the number of other financially viable PRPs, that our liability in connection with such matters will not be material.
Lodi, New Jersey Site
Pursuant to the New Jersey Industrial Site Recovery Act, Hexcel entered into an Administrative Consent Order for the environmental remediation of a manufacturing facility we own and formerly operated in Lodi, New Jersey. Hexcel has completed all active investigation and remediation activities, including restoration of the river embankment and installation of a barrier to prevent contaminant migration. We remediated this site in accordance with a State approved plan and are now awaiting a Response Action Outcome from the New Jersey Licensed Site Remediation Professional. Hexcel is in the process of monitoring contaminant levels to support a Monitored Natural Attenuation program and therefore we believe the spending on this program is largely complete. The accrual balance was $1.7 million at December 31, 2014.
Lower Passaic River Study Area
Hexcel and a group of approximately 72 other PRPs comprise the Lower Passaic Cooperating Parties Group (the “CPG”). Hexcel and the CPG are subject to a May 2007 Administrative Order on Consent (“AOC”) to perform a Remedial Investigation/Feasibility Study (“RI/FS”) of environmental conditions in the Lower Passaic River watershed. We were included in the CPG based on our operations at our former manufacturing site in Lodi, New Jersey.
In June 2007, the EPA issued a draft Focused Feasibility Study (“FFS”) that considers interim remedial options for the lower eight miles of the river, in addition to a “no action” option. On April 11, 2014, the EPA issued a revised FFS, which proposes several alternatives, including the bank to bank dredging of the lower eight miles of the river at an expected cost ranging from $0.8 billion to $3.25 billion, according to the EPA, but also includes a “no action” option. The comment period for the revised FFS closed on August 20, 2014 and we are awaiting a final decision. Hexcel is not currently subject to any obligation to undertake the work contemplated by the FFS, nor have we determined our allocable share of any remediation alternatives. However, based on a review of the Company’s position, and as no point within the range is a more probable outcome than any other point, the Company recorded the lower end of the expected range. The accrual balance was $1.9 million as of December 31, 2015 and $2.1 million at December 31, 2014. Despite the issuance of the revised FFS, there are many uncertainties associated with the final agreed upon remediation and the Company’s allocable share of the remediation. Given those uncertainties, the amounts accrued may not be indicative of the amounts for which the Company is ultimately responsible and will be refined as events in the remediation process develop.
Kent, Washington Site
We were party to a cost-sharing agreement regarding the operation of certain environmental remediation systems necessary to satisfy a post-closure care permit issued to a previous owner of our Kent, Washington site by the EPA. Under the terms of the cost-sharing agreement, we were obligated to reimburse the previous owner for a portion of the cost of the required remediation activities. The previous owner, who also continues to own an adjacent site, has installed certain remediation and isolation technologies and is operating those in accordance with an order agreed with the State of Washington. This isolation is expected to ultimately prevent further migration of contaminants to our site and enable us to perform a cleanup of our site. We and the Washington Department of Ecology have reached an agreed order to perform certain cleanup activities on our site by certain deadlines, and we are in full compliance with the order as modified. The Department of Ecology has recently approved a reduced number of wells and a reduced pumping volume for Hexcel’s wells on its property and agreed with a plan for more active remediation going forward. The total accrued liability related to this matter was $0.5 million at December 31, 2015 and December 31, 2014.
15
Omega Chemical Corporation Superfund Site, Whittier, California
We are a potentially responsible party at a former chemical waste site in Whittier, California. The PRPs at Omega have established a PRP Group, the “Omega PRP Group”, and are currently investigating and remediating soil and groundwater at the site pursuant to a Consent Decree with the EPA. The Omega PRP Group has attributed approximately 1.07% of the waste tonnage sent to the site to Hexcel. In addition to the Omega site specifically, the EPA is investigating the scope of regional groundwater contamination in the vicinity of the Omega site and issued a Record of Decision; the Omega PRP Group members have been noticed by the EPA as PRP’s who will be required to be involved in the remediation of the regional groundwater contamination in that vicinity as well. As a member of the Omega PRP group, Hexcel will incur costs associated with the investigation and remediation of the Omega site and the regional groundwater remedy, although our ultimate liability, if any, in connection with this matter cannot be determined at this time. The accrual relating to relating to the potential liability for both the Omega site and regional groundwater remedies was $0.3 million and $0.6 million at December 31, 2015 and 2014, respectively.
Environmental remediation reserve activity for the three years ended December 31, 2015 was as follows:
|
|
For the year ended December 31, |
|
|||||||||
(In millions) |
|
2015 |
|
|
2014 |
|
|
2013 |
|
|||
Beginning remediation accrual balance |
|
$ |
5.0 |
|
|
$ |
3.9 |
|
|
$ |
6.6 |
|
Current period expenses |
|
|
0.5 |
|
|
|
6.0 |
|
|
|
0.9 |
|
Cash expenditures |
|
|
(2.6 |
) |
|
|
(4.9 |
) |
|
|
(3.6 |
) |
Ending remediation accrual balance |
|
$ |
2.9 |
|
|
$ |
5.0 |
|
|
$ |
3.9 |
|
Capital expenditures for environmental matters |
|
$ |
7.1 |
|
|
$ |
7.3 |
|
|
$ |
4.6 |
|
Environmental Summary
Our estimate of liability as a PRP and our remaining costs associated with our responsibility to remediate the Lower Passaic River in New Jersey; Lodi, New Jersey; Kent, Washington; and other sites are accrued in the consolidated balance sheets. As of December 31, 2015 and 2014, our aggregate environmental related accruals were $2.9 million and $5.0 million, respectively. As of December 31, 2015 and 2014, $1.1 million and $3.2 million, respectively, were included in current other accrued liabilities, with the remainder included in other non-current liabilities. As related to certain environmental matters, except for the Lodi site, the accruals were estimated at the low end of a range of possible outcomes since no amount within the range is a better estimate than any other amount. If we had accrued, for those sites where we are able to estimate our liability, at the high end of the range of possible outcomes, our accrual would have been $28 million higher at December 31, 2015 and 2014.
These accruals can change significantly from period to period due to such factors as additional information on the nature or extent of contamination, the methods of remediation required, changes in the apportionment of costs among responsible parties and other actions by governmental agencies or private parties, or the impact, if any, of being named in a new matter.
Environmental remediation spending charged directly to our reserve balance was $2.6 million and $4.9 million for the years ended December 31, 2015 and 2014, respectively. In addition, our operating costs relating to environmental compliance charged directly to expense were $10.7 million and $14.2 million for the years ended December 31, 2015 and 2014, respectively.
ITEM 4. Mine Safety Disclosure
Not applicable.
16
ITEM 5. Market for Registrant’s Common Equity and Related Stockholder Matters
Hexcel common stock is traded on the New York Stock Exchange. The range of high and low sales prices of our common stock on the New York Stock Exchange is contained in Note 20 to the accompanying consolidated financial statements of this Annual Report on Form 10-K and is incorporated herein by reference.
On January 21, 2016, the Board of Directors declared a $0.10 quarterly dividend. The dividend will be payable to stockholders of record as of February 5, 2016, with a payment date of February 12, 2016. The Company announced programs to repurchase common stock of $250 million in 2015 and $150 million in each of the years 2014 and 2013. During 2015, 2014 and 2013 the Company repurchased a total of $146 million, $160 million and $90 million of shares, respectively. There is $204 million remaining under the authorized 2015 share repurchase program.
On January 28, 2016 there were 729 holders of record of our common stock.
The following chart provides information regarding repurchases of Hexcel common stock:
Period |
|
(a) Total Number of Shares (or Units) Purchased |
|
|
(b) Average Price Paid per Share (or Unit) |
|
|
(c) Total Number of Shares (or Units) Purchased as Part of Publicly Announced |
|
|
(d) Maximum Number (or Approximate Dollar Value) of Shares (or Units) that May Yet Be Purchased Under the Plans or Programs |
|
||||
October 1 — October 31, 2015 |
|
|
100,000 |
|
|
$ |
45.70 |
|
|
|
100,000 |
|
|
$ |
245,430,497 |
|
November 1 — November 30, 2015 |
|
|
460,108 |
|
|
$ |
45.55 |
|
|
|
460,108 |
|
|
$ |
224,472,988 |
|
December 1 — December 31, 2015 |
|
|
450,211 |
|
|
$ |
45.71 |
|
|
|
450,211 |
|
|
$ |
203,933,851 |
|
Total |
|
|
1,010,319 |
(1) |
|
$ |
45.64 |
|
|
|
1,010,319 |
|
|
$ |
203,933,851 |
|
|
1) |
In October 2015, our Board authorized us to repurchase an additional $250 million of our outstanding common stock. The Company repurchased $46.1 million of common stock during the fourth quarter of 2015. There is $203.9 million remaining under the current authorized share repurchase program. |
ITEM 6. Selected Financial Data
The information required by Item 6 is contained on page 25 of this Annual Report on Form 10-K under the caption “Selected Financial Data” and is incorporated herein by reference.
ITEM 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations
The information required by Item 7 is contained on pages 26 to 35 of this Annual Report on Form 10-K under “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and is incorporated herein by reference.
ITEM 7A. Quantitative and Qualitative Disclosures about Market Risk
The information required by Item 7A is contained under the heading “Market Risks” on pages 35 to 37 of this Annual Report on Form 10-K and is incorporated herein by reference.
ITEM 8. Financial Statements and Supplementary Data
The information required by Item 8 is contained on pages 41 to 73 of this Annual Report on Form 10-K under “Consolidated Financial Statements and Supplementary Data” and is incorporated herein by reference. The Report of Independent Registered Public Accounting Firm is contained on page 40 of this Annual Report on Form 10-K under the caption “Report of Independent Registered Public Accounting Firm” and is incorporated herein by reference.
17
ITEM 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure
None.
ITEM 9A. Controls and Procedures
Our Chief Executive Officer and Chief Financial Officer have evaluated our disclosure controls and procedures as of December 31, 2015 and have concluded that these disclosure controls and procedures are effective to ensure that information required to be disclosed by us in the reports that we file or submit under the Securities Exchange Act of 1934 is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms. These disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by us in the reports we file or submit is accumulated and communicated to management, including the Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.
Our Chief Executive Officer and Chief Financial Officer have concluded that there have not been any changes in our internal control over financial reporting during the fourth quarter that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.
Management’s report on our internal control over financial reporting is contained on page 39 of this Annual Report on Form 10-K and is incorporated herein by reference.
ITEM 9B. Other Information
None.
18
ITEM 10. Directors, Executive Officers and Corporate Governance
The information required by Item 10 will be contained in our definitive proxy statement for the 2016 Annual Meeting of Stockholders, which will be filed with the Securities and Exchange Commission within 120 days after the close of the fiscal year ended December 31, 2015. Such information is incorporated herein by reference.
ITEM 11. Executive Compensation
The information required by Item 11 will be contained in our definitive proxy statement for the 2016 Annual Meeting of Stockholders, which will be filed with the Securities and Exchange Commission within 120 days after the close of the fiscal year ended December 31, 2015. Such information is incorporated herein by reference.
ITEM 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters
The information required by Item 12 will be contained in our definitive proxy statement for the 2016 Annual Meeting of Stockholders, which will be filed with the Securities and Exchange Commission within 120 days after the close of the fiscal year ended December 31, 2015. Such information is incorporated herein by reference.
ITEM 13. Certain Relationships and Related Transactions, and Director Independence
The information required by Item 13 will be contained in our definitive proxy statement for the 2016 Annual Meeting of Stockholders, which will be filed with the Securities and Exchange Commission within 120 days after the close of the fiscal year ended December 31, 2015. Such information is incorporated herein by reference.
ITEM 14. Principal Accountant Fees and Services
The information required by Item 14 will be contained in our definitive proxy statement for the 2016 Annual Meeting of Stockholders, which will be filed with the Securities and Exchange Commission within 120 days after the close of the fiscal year ended December 31, 2015. Such information is incorporated herein by reference.
19
ITEM 15. Exhibits and Financial Statement Schedules
(a) Financial Statements, Financial Statement Schedules and Exhibits
(1) |
|
Financial Statements: |
|
|
|
|
|
Report of Independent Registered Public Accounting Firm |
|
|
|
|
|
Consolidated Balance Sheets as of December 31, 2015 and 2014 |
|
|
|
|
|
Consolidated Statements of Operations for each of the three years ended December 31, 2015, 2014, and 2013 |
|
|
|
|
|
Consolidated Statements of Comprehensive Income for each of the three years ended December 31, 2015, 2014 and 2013 |
|
|
|
|
|
Consolidated Statements of Stockholders’ Equity for each of the three years ended December 31, 2015, 2014 and 2013 |
|
|
|
|
|
Consolidated Statements of Cash Flows for each of the three years ended December 31, 2015, 2014 and 2013 |
|
|
|
|
|
Notes to the Consolidated Financial Statements |
|
|
|
(2) |
|
Financial Statement Schedule for the three years ended December 31, 2015, 2014 and 2013: |
|
|
|
|
|
Schedule II — Valuation and Qualifying Accounts |
|
|
|
|
|
All other schedules are omitted because they are not applicable or the required information is shown in the financial statements or the notes thereto. |
(3) Exhibits:
The following list of exhibits includes exhibits submitted with this Form 10-K as filed with the SEC and those incorporated by reference to other filings.
Exhibit No. |
|
Description |
||
3.1 |
|
Restated Certificate of Incorporation of Hexcel Corporation (incorporated herein by reference to Exhibit 1 to the Company’s Registration Statement on Form 8-A dated July 9, 1996, Registration No. 1-08472). |
||
|
|
|
||
3.2 |
|
Certificate of Amendment of the Restated Certificate of Incorporation of Hexcel Corporation (incorporated herein by reference to Exhibit 3.2 to the Company’s Annual Report on Form 10-K/A for the fiscal year ended December 31, 2002, filed on March 31, 2003). |
||
|
|
|
||
3.3 |
|
Amended and Restated Bylaws of Hexcel Corporation (incorporated by reference to Exhibit 3 to the Company’s Current Report on Form 8-K dated September 23, 2014). |
||
|
|
|
||
4.1 |
|
Form of Indenture between Hexcel Corporation and U.S. Bank National Association (incorporated by reference to Exhibit 4.1 to the Company’s Registration Statement on Form S-3 dated October 21, 2014, Registration No. 333-199500). |
||
|
|
|
||
4.2 |
|
Indenture, dated as of August 3, 2015, between Hexcel Corporation and U.S. Bank National Association, as Trustee (incorporated by reference to Exhibit 4.1 to the Company’s Current Report on Form 8-K dated August 3, 2015). |
||
|
|
|
||
4.3 |
|
First Supplemental Indenture, dated as of August 3, 2015, between Hexcel Corporation and U.S. Bank National Association, as Trustee (incorporated by reference to Exhibit 4.2 to the Company’s Current Report on Form 8-K dated August 3, 2015). |
||
|
|
|
||
4.4 |
|
Form of Note for 4.700% Senior Notes due 2025 (incorporated by reference to Exhibit 4.3 to the Company’s Current Report on Form 8-K dated August 3, 2015). |
||
|
|
|
||
10.1 |
|
Credit Agreement, dated as of September 24, 2014, by and among Hexcel Corporation, Hexcel Holdings Luxembourg S.à.r.l., the financial institutions from time to time party thereto, Citizens Bank, National Association, as administrative agent for the lenders, Citizens Bank, National Association, HSBC Bank USA, National Association, Merrill Lynch, Pierce, Fenner & Smith Incorporated and Wells Fargo Securities, LLC, as joint book managers and joint lead arrangers, Bank of America, N.A., HSBC Bank USA, National Association and Wells Fargo Bank, National Association, as syndication agents, and Fifth Third Bank, SunTrust Bank, TD Bank, N.A. and U.S. Bank National Association, as documentation agents (incorporated by reference to Exhibit 99.1 to the Company’s Current Report on Form 8-K dated September 29, 2014). |
20
Exhibit No. |
|
Description |
||
|
|
|
||
10.2 |
|
Company Guaranty, dated as of September 24, 2014, by Hexcel Corporation in favor of and for the benefit of Citizens Bank, National Association, as administrative agent for each of the Lender Group (as defined in the Credit Agreement) (incorporated by reference to Exhibit 99.2 to the Company’s Current Report on Form 8-K dated September 29, 2014). |
||
|
|
|
||
10.3 |
|
Special Warranty Deed made and entered into January 20, 2012, by and between the United States of America, as Grantor, acting by and through its legal agent, the Tennessee Valley Authority, and Hexcel Corporation, as Grantee (incorporated by reference to Exhibit 99.2 to the Company’s Current Report on Form 8-K dated January 25, 2012). |
||
|
|
|
||
10.4* |
|
Hexcel Corporation 2013 Incentive Stock Plan (incorporated herein by reference to Exhibit 4.4 to the Company’s Registration Statement on Form S-8 (Registration No. 333-188292), filed on May 2, 2013). |
||
|
|
|
||
10.5* |
|
Hexcel Corporation 2003 Incentive Stock Plan (incorporated herein by reference to Exhibit 10.3 to the Company’s Annual Report on Form 10-K/A for the fiscal year ended December 31, 2002, filed on March 31, 2003). |
||
|
|
|
||
10.6(a)* |
|
Hexcel Corporation 2003 Incentive Stock Plan as amended and restated December 11, 2003 (incorporated herein by reference to Exhibit 10.3(a) to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2003). |
||
|
|
|
||
10.6(b)* |
|
Hexcel Corporation 2003 Incentive Stock Plan as amended and restated May 19, 2005 (incorporated herein by reference to Exhibit 99.2 to the Company’s Current Report on Form 8-K dated May 24, 2005). |
||
|
|
|
||
10.7(c)* |
|
Hexcel Corporation 2003 Incentive Stock Plan as amended and restated December 31, 2008 (incorporated herein by reference to Exhibit 99.12 to the Company’s Current Report on Form 8-K dated January 7, 2009). |
||
|
|
|
||
10.6(d)* |
|
Hexcel Corporation 2003 Incentive Stock Plan, as amended and restated as of May 7, 2009 (incorporated herein by reference to Exhibit 10.4(d) to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2009). |
||
|
|
|
||
10.7* |
|
Hexcel Corporation Incentive Stock Plan, as amended and restated on January 30, 1997, and further amended on December 10, 1997 and March 25, 1999 (incorporated herein by reference to Exhibit 4.3 of the Company’s Registration Statement on Form S-8 filed on July 26, 1999). |
||
|
|
|
||
10.7(a)* |
|
Hexcel Corporation Incentive Stock Plan, as amended and restated on January 30, 1997, and further amended on December 10, 1997, March 25, 1999 and December 2, 1999 (incorporated by reference to Exhibit 10.3(c) of the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 1999). |
||
|
|
|
||
10.7(b)* |
|
Hexcel Corporation Incentive Stock Plan, as amended and restated on February 3, 2000 (incorporated herein by reference to Annex A of the Company’s Proxy Statement dated March 31, 2000). |
||
|
|
|
||
10.7(c)* |
|
Hexcel Corporation Incentive Stock Plan, as amended and restated on December 19, 2000 (incorporated herein by reference to Exhibit 10.3(e) to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2000). |
||
|
|
|
||
10.7(d)* |
|
Hexcel Corporation Incentive Stock Plan, as amended and restated on December 19, 2000 and further amended on January 10, 2002 (incorporated herein by reference to Exhibit 10.3(f) to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2001). |
||
|
|
|
||
10.8* |
|
Hexcel Corporation 1998 Broad Based Incentive Stock Plan (incorporated herein by reference to Exhibit 4.3 of the Company’s Form S-8 filed on June 19, 1998, Registration No. 333-57223). |
||
|
|
|
||
10.8(a)* |
|
Hexcel Corporation 1998 Broad Based Incentive Stock Plan, as amended on February 3, 2000 (incorporated by reference to Exhibit 10.1 to the Company’s Quarterly Report on Form 10-Q for the Quarter ended June 30, 2000). |
||
|
|
|
||
10.8(b)* |
|
Hexcel Corporation 1998 Broad Based Incentive Stock Plan, as amended on February 3, 2000, and further amended on February 1, 2001 (incorporated herein by reference to Exhibit 10.4(b) to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2000). |
||
|
|
|
||
10.8(c)* |
|
Hexcel Corporation 1998 Broad Based Incentive Stock Plan, as amended on February 3, 2000, and further amended on February 1, 2001 and January 10, 2002 (incorporated herein by reference to Exhibit 10.4(c) to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2001). |
||
|
|
|
||
10.8(d)* |
|
Hexcel Corporation 1998 Broad Based Incentive Stock Plan, as amended on February 3, 2000, and further amended on February 1, 2001, January 10, 2002 and December 12, 2002 (incorporated herein by reference to Exhibit 10.4(d) to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2002). |
21
Exhibit No. |
|
Description |
||
|
|
|
||
10.9* |
|
Hexcel Corporation Management Incentive Compensation Plan, as Amended and Restated on January 24, 2011 (incorporated herein by reference to Annex A to the Company’s Proxy Statement dated March 18, 2011). |
||
|
|
|
||
10.10* |
|
Hexcel Corporation Long-Term Incentive Plan (incorporated herein by reference to Exhibit 10.7 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2001). |
||
|
|
|
||
10.11* |
|
Form of Employee Option Agreement (2012 and 2013) (incorporated herein by reference to Exhibit 10.11 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2011). |
||
|
|
|
||
10.12* |
|
Form of Employee Option Agreement (2010) (incorporated herein by reference to Exhibit 10.10 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2009). |
||
|
|
|
||
10.13* |
|
Form of Employee Option Agreement (2009) (incorporated herein by reference to Exhibit 10.10 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2008). |
||
|
|
|
||
10.14* |
|
Modification to Option Agreements (incorporated herein by reference to Exhibit 10.11 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2008). |
||
|
|
|
||
10.15* |
|
Form of Employee Option Agreement (2008) (incorporated herein by reference to Exhibit 10.9 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2007). |
||
|
|
|
||
10.16* |
|
Form of Employee Option Agreement (2007) (incorporated herein by reference to Exhibit 10.9 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2006). |
||
|
|
|
||
10.17* |
|
Form of Employee Option Agreement (2005 and 2006) (incorporated herein by reference to Exhibit 99.1 to the Company’s Current Report on Form 8-K dated January 12, 2005). |
||
|
|
|
||
10.18* |
|
Form of Restricted Stock Unit Agreement (2014 and 2015) (incorporated herein by reference to Exhibit 99.1 to the Company’s Current Report on Form 8-K dated January 27, 2014). |
||
|
|
|
||
10.19* |
|
Form of Restricted Stock Unit Agreement (2012 and 2013) (incorporated herein by reference to Exhibit 10.22 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2011). |
||
|
|
|
||
10.20* |
|
Form of Performance Based Award Agreement (2015) (incorporated by reference to Exhibit 99.1 to the Company’s Current Report on Form 8-K dated January 26, 2015). |
||
|
|
|
||
10.21* |
|
Form of Performance Based Award Agreement (2014) (incorporated herein by reference to Exhibit 99.2 to the Company’s Current Report on Form 8-K dated January 27, 2014). |
||
|
|
|
||
10.22* |
|
Form of Performance Based Award Agreement (2012 and 2013) (incorporated herein by reference to Exhibit 99.1 to the Company’s Current Report on Form 8-K dated January 26, 2012). |
||
|
|
|
||
10.23* |
|
Hexcel Corporation Nonqualified Deferred Compensation Plan, Effective as of January 1, 2005, Amended and Restated as of December 31, 2008 (incorporated herein by reference to Exhibit 99.14 to The Company’s Current Report on Form 8-K dated January 7, 2009). |
||
|
|
|
||
10.24* |
|
Offer of Employment between Hexcel Corporation and Nick L. Stanage dated July 22, 2013 (incorporated herein by reference to Exhibit 10.2 to the Company’s Quarterly Report on Form 10-Q for the quarter ended September 30, 2013). |
||
|
|
|
||
10.25* |
|
Supplemental Executive Retirement Agreement dated October 28, 2009, between Nick L. Stanage and Hexcel Corporation (incorporated herein by reference to Exhibit 99.1 to the Company’s Current Report on Form 8-K dated October 28, 2009). |
||
|
|
|
||
10.26* |
|
Hexcel Corporation Executive Severance Policy (incorporated herein by reference to Exhibit 10.3 to the Company’s Quarterly Report on Form 10-Q for the quarter ended September 30, 2013). |
||
|
|
|
||
10.27* |
|
Amended and Restated Executive Severance Agreement between Hexcel Corporation and Wayne C. Pensky, dated December 31, 2008 (incorporated herein by reference to Exhibit 99.4 to the Company’s Current Report on Form 8-K dated January 7, 2009). |
||
|
|
|
||
10.27(a)* |
|
Amended and Restated Executive Deferred Compensation Agreement between Hexcel Corporation and Wayne C. Pensky, dated December 31, 2007 (incorporated herein by reference to Exhibit 99.3 to the Company’s Current Report on Form 8-K dated January 7, 2008). |
||
|
|
|
22
Exhibit No. |
|
Description |
||
|
Amended and Restated Executive Severance Agreement between Hexcel Corporation and Ira J. Krakower, dated December 31, 2008 (incorporated herein by reference to Exhibit 99.5 to the Company’s Current Report on Form 8-K dated January 7, 2009). |
|||
|
|
|
||
10.28(a)* |
|
Amended and Restated Supplemental Executive Retirement Agreement dated December 31, 2008, between Ira J. Krakower and Hexcel Corporation (incorporated herein by reference to Exhibit 99.3 to the Company’s Current Report on Form 8-K dated January 7, 2009). |
||
|
|
|
||
10.29* |
|
Amended and Restated Executive Severance Agreement between Hexcel Corporation and Robert G. Hennemuth, dated December 31, 2008 (incorporated herein by reference to Exhibit 99.6 to the Company’s Current Report on Form 8-K dated January 7, 2009). |
||
|
|
|
||
10.29(a)* |
|
Amended and Restated Executive Deferred Compensation Agreement between Hexcel Corporation and Robert G. Hennemuth, dated December 31, 2007 (incorporated herein by reference to Exhibit 99.4 to the Company’s Current Report on Form 8-K dated January 7, 2008). |
||
|
|
|
||
10.30* |
|
Director Compensation Program, as adopted on May 8, 2014 (incorporated herein by reference to Exhibit 10.37 to the Company’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2014). |
||
|
|
|
||
10.31* |
|
Form of Restricted Stock Unit Agreement for Non-Employee Directors (incorporated herein by reference to Exhibit 99 to the Company’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2013). |
||
|
|
|
||
10.32* |
|
Hexcel Corporation 2009 Employee Stock Purchase Plan (incorporated herein by reference to Exhibit 10.39 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2009). |
||
|
|
|
||
21 |
|
Subsidiaries of the Company. |
||
|
|
|
||
23 |
|
Consent of Independent Registered Public Accounting Firm. |
||
|
|
|
||
24 |
|
Power of Attorney (included on signature page). |
||
|
|
|
||
31.1 |
|
Certification of Chief Executive Officer, Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002. |
||
|
|
|
||
31.2 |
|
Certification of Chief Financial Officer, Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002. |
||
|
|
|
||
32 |
|
Certification of Chief Executive Officer and Chief Financial Officer Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002. |
||
|
|
|
||
101 |
|
The following materials from the Hexcel Corporation Annual Report on Form 10-K for the year ended December 31, 2015, formatted in Extensible Business Reporting Language (XBRL): (i) the Consolidated Statements of Operations, (ii) Consolidated Statements of Comprehensive Income (iii), Consolidated Balance Sheets, (iv) Consolidated Statements of Cash Flows, and (v) related notes. |
|
* Indicates management contract or compensatory plan or arrangement.
23
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
|
|
Hexcel Corporation |
|
|
|
February 4, 2016 |
|
/s/ NICK L. STANAGE |
(Date) |
|
Nick L. Stanage |
|
|
Chairman of the Board of Directors, |
|
|
Chief Executive Officer and President |
KNOWN TO ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints each of Nick L. Stanage, Wayne C. Pensky and Ira J. Krakower, individually, his attorney-in-fact, with the power of substitution, for him in any and all capacities, to sign any amendments to this report, and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that each said attorney-in-fact, or his substitute or substitutes, may do or cause to be done by virtue hereof.
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.
Signature |
|
Title |
|
Date |
|
|
|
|
|
/s/ NICK L. STANAGE |
|
Chairman of the Board of Directors, |
|
February 4, 2016 |
(Nick L. Stanage) |
|
Chief Executive Officer and President |
|
|
|
|
(Principal Executive Officer) |
|
|
|
|
|
|
|
/s/ WAYNE PENSKY |
|
Senior Vice President and |
|
February 4, 2016 |
(Wayne Pensky) |
|
Chief Financial Officer |
|
|
|
|
(Principal Financial Officer) |
|
|
|
|
|
|
|
/s/ KIMBERLY HENDRICKS |
|
Vice President, Corporate Controller and |
|
|
(Kimberly Hendricks) |
|
Chief Accounting Officer |
|
February 4, 2016 |
|
|
(Principal Accounting Officer) |
|
|
|
|
|
|
|
/s/ JOEL S. BECKMAN |
|
Director |
|
February 4, 2016 |
(Joel S. Beckman) |
|
|
|
|
|
|
|
|
|
/s/ LYNN BRUBAKER |
|
Director |
|
February 4, 2016 |
(Lynn Brubaker) |
|
|
|
|
|
|
|
|
|
/s/ JEFFREY C. CAMPBELL |
|
Director |
|
February 4, 2016 |
(Jeffrey C. Campbell) |
|
|
|
|
|
|
|
|
|
/s/ CYNTHIA EGNOTOVICH |
|
Director |
|
February 4, 2016 |
(Cynthia Egnotovich) |
|
|
|
|
|
|
|
|
|
/s/ W. KIM FOSTER |
|
Director |
|
February 4, 2016 |
(W. Kim Foster) |
|
|
|
|
|
|
|
|
|
/s/ THOMAS A. GENDRON |
|
Director |
|
February 4, 2016 |
(Thomas A. Gendron) |
|
|
|
|
|
|
|
|
|
/s/ JEFFREY A. GRAVES |
|
Director |
|
February 4, 2016 |
(Jeffrey A. Graves) |
|
|
|
|
|
|
|
|
|
/s/ GUY HACHEY |
|
Director |
|
February 4, 2016 |
(Guy Hachey) |
|
|
|
|
|
|
|
|
|
/s/ DAVID C. HILL |
|
Director |
|
February 4, 2016 |
(David C. Hill) |
|
|
|
|
|
|
|
|
|
/s/ DAVID L. PUGH |
|
Director |
|
February 4, 2016 |
(David L. Pugh) |
|
|
|
|
24
The following table summarizes selected financial data as of and for the five years ended December 31:
(In millions, except per share data) |
|
2015 |
|
|
2014 |
|
|
2013 |
|
|
2012 |
|
|
2011 |
|
|||||
Results of Operations: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Net sales |
|
$ |
1,861.2 |
|
|
$ |
1,855.5 |
|
|
$ |
1,678.2 |
|
|
$ |
1,578.2 |
|
|
$ |
1,392.4 |
|
Cost of sales |
|
|
1,328.4 |
|
|
|
1,346.7 |
|
|
|
1,224.2 |
|
|
|
1,171.5 |
|
|
|
1,050.3 |
|
Gross margin |
|
|
532.8 |
|
|
|
508.8 |
|
|
|
454.0 |
|
|
|
406.7 |
|
|
|
342.1 |
|
Selling, general and administrative expenses |
|
|
156.1 |
|
|
|
149.1 |
|
|
|
141.4 |
|
|
|
130.7 |
|
|
|
120.5 |
|
Research and technology expenses |
|
|
44.3 |
|
|
|
47.9 |
|
|
|
41.7 |
|
|
|
36.7 |
|
|
|
32.6 |
|
Other expense (income), net |
|
|
— |
|
|
|
6.0 |
|
|
|
— |
|
|
|
(9.5 |
) |
|
|
(3.0 |
) |
Operating income |
|
|
332.4 |
|
|
|
305.8 |
|
|
|
270.9 |
|
|
|
248.8 |
|
|
|
192.0 |
|
Interest expense, net |
|
|
14.2 |
|
|
|
8.0 |
|
|
|
7.3 |
|
|
|
10.0 |
|
|
|
11.6 |
|
Non-operating expense, net |
|
|
— |
|
|
|
0.5 |
|
|
|
1.0 |
|
|
|
1.1 |
|
|
|
4.9 |
|
Income before income taxes and equity in earnings |
|
|
318.2 |
|
|
|
297.3 |
|
|
|
262.6 |
|
|
|
237.7 |
|
|
|
175.5 |
|
Provision for income taxes |
|
|
83.0 |
|
|
|
89.3 |
|
|
|
76.0 |
|
|
|
74.1 |
|
|
|
41.6 |
|
Income before equity in earnings |
|
|
235.2 |
|
|
|
208.0 |
|
|
|
186.6 |
|
|
|
163.6 |
|
|
|
133.9 |
|
Equity in earnings from affiliated companies |
|
|
2.0 |
|
|
|
1.4 |
|
|
|
1.3 |
|
|
|
0.7 |
|
|
|
1.6 |
|
Net income |
|
$ |
237.2 |
|
|
$ |
209.4 |
|
|
$ |
187.9 |
|
|
$ |
164.3 |
|
|
$ |
135.5 |
|
Basic net income per common share |
|
$ |
2.48 |
|
|
$ |
2.16 |
|
|
$ |
1.88 |
|
|
$ |
1.64 |
|
|
$ |
1.37 |
|
Diluted net income per common share |
|
$ |
2.44 |
|
|
$ |
2.12 |
|
|
$ |
1.84 |
|
|
$ |
1.61 |
|
|
$ |
1.35 |
|
Weighted-average shares outstanding: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Basic |
|
|
95.8 |
|
|
|
96.8 |
|
|
|
100.0 |
|
|
|
100.2 |
|
|
|
98.8 |
|
Diluted |
|
|
97.2 |
|
|
|
98.7 |
|
|
|
102.1 |
|
|
|
102.0 |
|
|
|
100.7 |
|
Financial Position: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Total assets |
|
$ |
2,187.4 |
|
|
$ |
2,036.4 |
|
|
$ |
1,836.1 |
|
|
$ |
1,603.1 |
|
|
$ |
1,376.1 |
|
Working capital |
|
$ |
341.2 |
|
|
$ |
371.1 |
|
|
$ |
387.7 |
|
|
$ |
340.4 |
|
|
$ |
276.8 |
|
Long-term notes payable and capital lease obligations |
|
$ |
576.5 |
|
|
$ |
415.0 |
|
|
$ |
292.0 |
|
|
$ |
240.0 |
|
|
$ |
238.3 |
|
Dividends per share of common stock |
|
$ |
0.40 |
|
|
$ |
— |
|
|
$ |
— |
|
|
$ |
— |
|
|
$ |
— |
|
Stockholders’ equity |
|
$ |
1,179.6 |
|
|
$ |
1,149.9 |
|
|
$ |
1,160.4 |
|
|
$ |
994.1 |
|
|
$ |
802.2 |
|
Other Data: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Depreciation |
|
$ |
76.4 |
|
|
$ |
71.2 |
|
|
$ |
59.3 |
|
|
$ |
57.2 |
|
|
$ |
55.3 |
|
Accrual basis capital expenditures |
|
$ |
289.0 |
|
|
$ |
270.2 |
|
|
$ |
206.5 |
|
|
$ |
241.3 |
|
|
$ |
184.5 |
|
Shares outstanding at year-end, less treasury stock |
|
|
93.5 |
|
|
|
95.5 |
|
|
|
98.9 |
|
|
|
99.9 |
|
|
|
98.8 |
|
|
25
MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
Business Overview
|
|
Year Ended December 31, |
|
|||||||||
(In millions, except per share data) |
|
2015 |
|
|
2014 |
|
|
2013 |
|
|||
Net sales |
|
$ |
1,861.2 |
|
|
$ |
1,855.5 |
|
|
$ |
1,678.2 |
|
Gross margin % |
|
|
28.6 |
% |
|
|
27.4 |
% |
|
|
27.1 |
% |
Other expense (income), net |
|
$ |
— |
|
|
$ |
6.0 |
|
|
$ |
— |
|
Operating income (a) |
|
$ |
332.4 |
|
|
$ |
305.8 |
|
|
$ |
270.9 |
|
Operating income % |
|
|
17.9 |
% |
|
|
16.5 |
% |
|
|
16.1 |
% |
Interest expense, net |
|
$ |
14.2 |
|
|
$ |
8.0 |
|
|
$ |
7.3 |
|
Non-operating expense |
|
$ |
— |
|
|
$ |
0.5 |
|
|
$ |
1.0 |
|
Provision for income taxes |
|
$ |
83.0 |
|
|
$ |
89.3 |
|
|
$ |
76.0 |
|
Equity in earnings from investments in affiliated companies |
|
$ |
2.0 |
|
|
$ |
1.4 |
|
|
$ |
1.3 |
|
Net income (a) |
|
$ |
237.2 |
|
|
$ |
209.4 |
|
|
$ |
187.9 |
|
Diluted net income per common share |
|
$ |
2.44 |
|
|
$ |
2.12 |
|
|
$ |
1.84 |
|
|
(a) |
The Company uses non-GAAP financial measures, including sales and expenses measured in constant dollars (prior year sales and expenses measured at current year exchange rates); operating income adjusted for items included in other expense (income), net; net income and earnings per share adjusted for items included in non-operating expenses; the effective tax rate adjusted for certain out of period items; and free cash flow. Management believes these non-GAAP measurements are meaningful to investors because they provide a view of Hexcel with respect to ongoing operating results and comparisons to prior periods. These adjustments represent significant charges or credits that are important to an understanding of Hexcel’s overall operating results in the periods presented. Such non-GAAP measurements are not determined in accordance with generally accepted accounting principles and should not be viewed as an alternative to GAAP measures of performance. Reconciliations to adjusted operating income, adjusted net income, adjusted diluted net income per share and free cash flow are provided below: |
|
|
Year Ended December 31, |
|
|||||||||
(In millions) |
|
2015 |
|
|
2014 |
|
|
2013 |
|
|||
GAAP operating income |
|
$ |
332.4 |
|
|
$ |
305.8 |
|
|
$ |
270.9 |
|
Other expense (income), net (1) |
|
|
— |
|
|
|
6.0 |
|
|
|
— |
|
Adjusted operating income (Non-GAAP) |
|
$ |
332.4 |
|
|
$ |
311.8 |
|
|
$ |
270.9 |
|
Adjusted operating income % of sales (Non-GAAP) |
|
|
17.9 |
% |
|
|
16.8 |
% |
|
|
16.1 |
% |
|
|
Year Ended December 31, |
|
|||||||||
(In millions) |
|
2015 |
|
|
2014 |
|
|
2013 |
|
|||
GAAP net income |
|
$ |
237.2 |
|
|
$ |
209.4 |
|
|
$ |
187.9 |
|
Other expense (income), net of tax (1) |
|
|
— |
|
|
|
3.9 |
|
|
|
— |
|
Non-operating expense, net of tax (2) |
|
|
— |
|
|
|
0.3 |
|
|
|
0.6 |
|
Discrete tax benefits (3) |
|
|
(11.6 |
) |
|
|
— |
|
|
|
— |
|
Adjusted net income (Non-GAAP) |
|
$ |
225.6 |
|
|
$ |
213.6 |
|
|
$ |
188.5 |
|
Adjusted diluted net income per share (Non-GAAP) |
|
$ |
2.32 |
|
|
$ |
2.16 |
|
|
$ |
1.85 |
|
|
|
Year Ended December 31, |
|
|||||||||
(In millions) |
|
2015 |
|
|
2014 |
|
|
2013 |
|
|||
Net cash provided by operating activities |
|
$ |
301.0 |
|
|
$ |
318.0 |
|
|
$ |
272.9 |
|
Less: Capital expenditures |
|
|
(305.3 |
) |
|
|
(260.1 |
) |
|
|
(194.9 |
) |
Free cash flow (Non-GAAP) |
|
$ |
(4.3 |
) |
|
$ |
57.9 |
|
|
$ |
78.0 |
|
|
|
(1) |
Other expense (income), net for the year ended December 31, 2014 included expense of $6.0 million ($3.9 million after tax) for the increase in environmental reserves primarily for remediation of a former manufacturing facility. |
|
(2) |
Non-operating expense, net of tax, in 2014 and 2013 was primarily for the accelerated amortization of deferred financing costs related to repaying the term loan and refinancing our revolving credit facility in September 2014 and June 2013. |
|
(3) |
The year ended December 31, 2015 included benefits of $11.6 million primarily related to the release of reserves for uncertain tax positions. |
26
2015 was another record performance year for the Company, with total sales of $1,861.2 million, which increased 3.6% in constant currency over 2014. In constant currency and by market, our Commercial Aerospace sales increased 7.6%, Space & Defense sales were down 7% from 2014 and our Industrial sales were essentially flat. The Commercial Aerospace market represents 69% of our sales, followed by Space & Defense at 18% and Industrial at 13%.
|
· |
In 2015, our Commercial Aerospace sales increased by 7.6% on a constant currency basis. Sales to Airbus and Boeing and their subcontractors, which comprised 87% of our Commercial Aerospace sales, were up over 6% with new program sales (A350, B787, A320neo and B737 MAX) increasing over 40% with the A350 and A320neo shipments leading the growth. Sales for the Airbus and Boeing legacy aircraft declined 5% driven by declines in legacy wide-body production. Almost all of our Commercial Aerospace sales are for new aircraft production as we have only nominal aftermarket sales. |
|
· |
Airbus and Boeing combined deliveries in 2015 were a record 1,397 aircraft, compared to the previous record of 1,352 aircraft in 2014. The demand for new commercial aircraft is principally driven by two factors. The first is airline passenger traffic (measured by revenue passenger miles) and the second is the replacement rate for existing aircraft. The International Air Transport Association (IATA) estimates 2015 revenue passenger miles were 6.7% higher than 2014. Combined orders for Airbus and Boeing in 2015 were 1,804 planes with book to bill still being greater than one, compared to 2,888 orders for 2014. Backlog at the end of 2015 increased to a record 12,582 planes, or nine years of backlog at the 2015 delivery pace. Based on Airbus and Boeing announced projections, 2016 deliveries are estimated to be about the same as 2015. |
|
· |
Overall the Commercial Aerospace industry continues to utilize a greater proportion of advanced composite materials with each new generation of aircraft. These new programs include the A350, B787, A320neo and B737 MAX. Hexcel has been awarded a contract to supply carbon fiber composite materials for the major primary structures for the A350 and has total content of about $5 million per plane. The A350 has about 53% composite content by weight. As of December 31, 2015, Airbus has 762 orders in backlog for the A350, which had its first customer delivery in December 2014. The B787 has more than 50% composite content by weight, including composite wings and fuselage, compared to the 11% composite content used in the construction of its B777 aircraft and 6% for the B767 the aircraft it is primarily replacing. The B787 entered into service in 2011and Hexcel averages about $1.5 million of content per plane. As of December 31, 2015, Boeing had a backlog of 779 orders for its B787 aircraft and has delivered 363 planes. Both Airbus and Boeing have announced new versions of their narrowbody planes that will have new engines. Airbus’s A320neo had its first customer delivery in January 2016, while the Boeing’s B737 MAX had its first flight on January 29, 2016 and is expected to enter service in 2017. Both of these aircraft are expected to provide opportunities for Hexcel to increase its content on these new programs up to 50% higher than on the current models of the A320 and B737. In 2014, Airbus announced a new version of its A330, the A330neo, which will have new engines, and Boeing announced the B777X, a new version of the B777 with composite wings and new engines. Our sales on these four new programs plus those that will develop from the A330neo and the B777X will represent an increasing percent of our Commercial Aerospace sales in the future. |
|
· |
The regional and business aircraft market sales, which account for 13% of Commercial Aerospace sales, were down 9.7% compared to 2014 sales but were about the same level on a constant currency basis. |
|
· |
Our Space & Defense constant currency sales were down about 7%, on a constant currency basis, from 2014. The decline in 2015 was across all regions and includes a 25% decline in commercial rotorcraft, the planned decline in Eurofighter buildrates, lumpiness from new helicopter programs such as the CH53K, and the unanticipated softness in several mature rotorcraft programs. Rotorcraft, with about 85% coming from military programs, account for almost 55% of our Space & Defense sales. New or retrofit rotorcraft programs have an increased reliance on composite materials. In addition, our Engineered Products segment provides specialty value added services such as machining, sub-assembly, and even full blade manufacturing. We are on more than 100 Space & Defense programs of which our top 10 programs represent about 56% of the sales in this sector. Key programs include the V-22 (Osprey) tilt rotor aircraft, A400M military transport Airbus Group, F-35 (joint strike fighter or JSF), Blackhawk, AH-64 Apache, European Fighter Aircraft (Typhoon), S76, C-130, F/A-18E/F (Hornet), CH-53 Super Stallion, and Tiger helicopters. |
|
· |
Our Industrial constant currency sales were about the same in 2015 as in 2014. Industrial sales include wind energy, recreation, transportation and general industrial applications, with wind energy being the largest submarket. Approximately two thirds of our Industrial sales are outside of the U.S. The wind energy submarket sales were stable compared to 2014, while the rest of Industrial sales were down about 2% in constant currency. |
Results of Operations
Our sales of $1,861.2 million were $5.7 million, or 0.3%, higher than 2014 and our operating income of $332.4 million (or 17.9% of sales) was 9% higher than 2014. Other operating income for the year ended December 31, 2014 included a $6.0 million charge for
27
additional environmental reserves primarily for remediation of a former manufacturing facility. Excluding this item, operating income in 2015 increased 7% over 2014.
We have two reportable segments: Composite Materials and Engineered Products. Although these segments provide customers with different products and services, they often overlap within three end business markets: Commercial Aerospace, Space & Defense and Industrial. Therefore, we also find it meaningful to evaluate the performance of our segments through the three end business markets. Further discussion and additional financial information about our segments may be found in Note 16 to the accompanying consolidated financial statements of this Annual Report on Form 10-K.
Net Sales: Consolidated net sales of $1,861.2 million for 2015 were $5.7 million, or 0.3%, higher than the $1,855.5 million of net sales for 2014. Consolidated net sales in 2014 increased 10.6% over the $1,678.2 million of sales in 2013. The sales increase in both 2015 and 2014 reflect increased volume in Commercial Aerospace driven by new aircraft programs and increased build rates. Had the same U.S. dollar, British Pound sterling and Euro exchange rates applied in 2014 as in 2015 (“constant currency”), consolidated net sales for 2015 would have been 3.6% higher than 2014. In constant currency, consolidated net sales for 2014 would have been 10.5%, higher than 2013 net sales.
Composite Materials: Net sales of $1,458.7 million for 2015 increased $37.8 million over the $1,420.9 million for 2014 driven by an increase in Commercial Aerospace sales as a result of new programs. Space & Defense sales remained at essentially the same level as 2014 and Industrial sales decreased 10.4%. The decrease in Industrial sales was driven by unfavorable foreign exchange, as on a constant currency basis sales were relatively flat with 2014. In 2014, net sales of $1,420.9 million increased $134.0 million over the $1,286.9 million for 2013 driven by an increase in Commercial Aerospace sales. Space & Defense sales remained at the same level as 2013 and Industrial increased 24.2%. The increase in Industrial sales was driven by wind energy, which increased more than 25% over a weak 2013.
Engineered Products: Net sales of $402.5 million for 2015 decreased $32.1 million from the $434.6 million for 2014 driven by a 30% decrease in Space & Defense sales. The decline in Space & Defense sales in 2015 was across all regions and reflects the C-17 program coming to an end combined with a 25% decline in commercial rotorcraft. Net sales of $434.6 million for 2014 increased $43.3 million over the $391.3 million for 2013 driven by a 17.0% increase in Commercial Aerospace sales. Space & Defense sales remained at the same level as 2014. There are not significant sales to the Industrial market from this segment.
The following table summarizes net sales to third-party customers by segment and end market in 2015, 2014 and 2013:
(In millions) |
|
|
Commercial |
|
|
|
Space & |
|
|
|
Industrial |
|
|
|
Total |
|
2015 Net Sales |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Composite Materials |
|
$ |
959.7 |
|
|
$ |
264.6 |
|
|
$ |
234.4 |
|
|
$ |
1,458.7 |
|
Engineered Products |
|
|
326.2 |
|
|
|
72.7 |
|
|
|
3.6 |
|
|
|
402.5 |
|
Total |
|
$ |
1,285.9 |
|
|
$ |
337.3 |
|
|
$ |
238.0 |
|
|
$ |
1,861.2 |
|
|
|
|
69 |
% |
|
|
18 |
% |
|
|
13 |
% |
|
|
100 |
% |
2014 Net Sales |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Composite Materials |
|
$ |
887.6 |
|
|
$ |
271.6 |
|
|
$ |
261.7 |
|
|
$ |
1,420.9 |
|
Engineered Products |
|
|
327.7 |
|
|
|
104.2 |
|
|
|
2.7 |
|
|
|
434.6 |
|
Total |
|
$ |
1,215.3 |
|
|
$ |
375.8 |
|
|
$ |
264.4 |
|
|
$ |
1,855.5 |
|
|
|
|
66 |
% |
|
|
20 |
% |
|
|
14 |
% |
|
|
100 |
% |
2013 Net Sales |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Composite Materials |
|
$ |
804.3 |
|
|
$ |
271.9 |
|
|
$ |
210.7 |
|
|
$ |
1,286.9 |
|
Engineered Products |
|
|
280.2 |
|
|
|
104.0 |
|
|
|
7.1 |
|
|
|
391.3 |
|
Total |
|
$ |
1,084.5 |
|
|
$ |
375.9 |
|
|
$ |
217.8 |
|
|
$ |
1,678.2 |
|
|
|
|
65 |
% |
|
|
22 |
% |
|
|
13 |
% |
|
|
100 |
% |
Commercial Aerospace: Net sales to the Commercial Aerospace market increased $70.6 million or 5.8% to $1,285.9 million for 2015 as compared to net sales of $1,215.3 million for 2014; 2014 net sales increased by $130.8 million as compared to net sales of $1,084.5 million for 2013. In constant currency, net sales to the Commercial Aerospace market increased $90.7 million or 7.6% in 2015 compared to 2014. Currency had a nominal effect on sales in 2014.
Sales for Airbus and Boeing programs, in 2015, were up almost 6% with new program sales (A350, B787, A320neo and B737 MAX) increasing over 40% and legacy aircraft related sales decreasing 5%, driven by declines in legacy wide-body production. Sales for the regional and business aircraft market were down 9.7% as compared to 2014 but were about the same on a constant currency basis.
28
In 2014, sales for Airbus and Boeing programs increased 12% over the prior year, with new aircraft programs (A350, B787, A320neo and B737 MAX) sales up 35% and legacy related sales up 3%. Sales for the regional and business aircraft market were up nearly 12% compared with 2013 led by business jet sales.
Space & Defense: Net sales of $337.3 million were $38.5 million lower than 2014; net sales of $375.8 million in 2014 were at the same level as 2013. In 2015, constant currency sales were down about 7% from 2014. Foreign exchange had a nominal impact on Space & Defense sales in 2014 compared to 2013. Rotorcraft accounted for about 55% of Space & Defense sales, with about 85% coming from military sales. The decline in 2015 was across all regions and included the end of the C17 program and a 25% decline in commercial rotorcraft, the planned decline in Eurofighter buildrates, lumpiness from new helicopter programs such as the CH53K, and unanticipated softness in several mature rotorcraft programs. For all of Space & Defense sales, our top 10 programs account for about 56% of total Space & Defense sales and in aggregate are slightly higher for the full year of 2015 than for the comparable 2014 period. Hexcel participates in a wide range of programs, in the U.S., Europe and Asia, including rotorcraft, transport, fixed wing and satellite programs.
Industrial: Net sales of $238.0 million for 2015 decreased by $26.4 million, or 10%, compared to 2014; net sales of $264.4 in 2014 increased by $46.6 million or 21.4% from 2013. Our Industrial constant currency sales were about the same in 2015 as in 2014 and foreign exchange had a nominal impact on Industrial sales in 2014 compared to 2013. Industrial sales include wind energy, recreation, transportation and general industrial applications, with wind energy being the largest submarket. Approximately two thirds of our Industrial sales are outside of the U.S. The wind energy submarket sales were stable compared to 2014, while the rest of Industrial sales were down about 2% in constant currency. Our wind energy submarket increased more than 25% in 2014 from a weak 2013.
Gross Margin: Gross margin for 2015 was $532.0 million or 28.6% of net sales as compared to $508.8 million or 27.4% of net sales in 2014. In 2015, exchange rates contributed just under half of the percentage increase. Exchange rates had a nominal impact on 2014 gross margin percentages. Higher volume and continued improvements in operating performance contributed to margin growth in both years. Gross margin for 2013 was $454.0 million, or 27.1% of net sales.
Selling, General and Administrative (“SG&A”) Expenses: SG&A expenses were $156.1 million or 8.4% of net sales for 2015, $149.1 million or 8.0% of net sales for 2014 and $141.4 million or 8.4% of net sales for 2013. The increase in SG&A over recent years reflects added infrastructure to support our growth. 2015 spending also included almost $10 million more than 2014 on information technology expenses as we completed the implementation of a new ERP system and we continued to invest in other systems.
Research and Technology (“R&T”) Expenses: R&T expenses for 2015 were $44.3 million or 2.4% of net sales; $47.9 million or 2.6% of net sales in 2014 and $41.7 million or 2.5% of net sales in 2013. On a constant currency basis the expenses in 2015 were about the same as 2014. Spending increased from 2013 to 2014 as we invested in new products and technology to support our growth and productivity initiatives.
Other Income, Net: Other operating income, net for the year ended December 31, 2014, included other expense of $6.0 million for the increase in environmental reserves primarily for remediation related to a former manufacturing facility.
Operating Income: Operating income for 2015 was $332.4 million compared with operating income of $305.8 million for 2014 and $270.9 million for 2013. Operating income as a percent of sales was 17.9%, 16.5% and 16.1% in 2015, 2014, and 2013, respectively. Improved gross margin drove the increase in operating margin for the comparative years.
One of the Company’s performance measures is operating income adjusted for other expense (income), which is a non-GAAP measure. Adjusted operating income for the year ended December 31, 2014 was $311.8 million or 16.8%. There were no adjustments to the 2015 and 2013 operating income of $332.4 million or 17.9% of net sales and $270.9 million or 16.1% of net sales, respectively. A reconciliation from operating income to adjusted operating income is provided on page 26.
Almost all of the Company’s sales and costs are either in U.S. dollars, Euros or British Pound sterling, with approximately one-quarter of our sales in Euros or British Pound sterling. In addition, much of our European Commercial Aerospace business has sales denominated in dollars and costs denominated in all three currencies. The net impact is that as the dollar strengthens against the Euro and the British Pound sterling, sales will decrease while operating income will increase. We have an active hedging program to minimize the impact on operating income, but our operating income as a percentage of net sales is affected. Foreign exchange had a 90 basis point favorable impact on 2015 operating income percentage and a nominal impact on our operating income percentage in 2014 and 2013.
29
Operating income for the Composite Materials segment increased $27.4 million to $336.2 million from $308.8 million in 2014. Operating income for Composite Materials was $276.3 million in 2013. The consistent growth in operating income for the Composite Materials segment was driven primarily by higher commercial aerospace sales volume. Operating income for the year ended December 31, 2015 for the Engineered Products segment decreased $11.2 million to $55.8 million, as compared to $67.0 million for 2014. The decline in profitability was driven by the decline in sales, primarily rotorcraft. Also, there is a learning curve in this segment for new programs as they either start-up or ramp-up, so margins in Engineered Products will be unfavorably impacted as we transition through programs and work our way up the learning curve in making new parts and structures. Operating income margins for Engineered Products will be less than Composite Materials as it is not nearly as capital intensive. Accordingly, operating income margins in the 12% –14% range will produce very good returns on invested capital. Operating income for the Engineered Products segment in 2014 increased by $8.1 million compared with 2013 to $67.0 million.
We did not allocate corporate net operating expenses of $59.6 million, $70.0 million and $64.3 million to segments in 2015, 2014, and 2013, respectively. Corporate and Other in 2014 included $6.0 million of other expenses, as discussed above.
Interest Expense: Interest expense was $14.2 million for 2015, $8.0 million for 2014 and $7.3 million for 2013. Interest expense for 2015 increased over the comparable period of 2014 due to a higher average interest rate on debt outstanding as a result of the Company issuing, in August 2015, $300 million in aggregate principal amount of 4.7% Senior Unsecured Notes due in 2025. In addition, debt increased as we completed $146 million of share buybacks and paid a total of $38.3 million of dividends. The increase in interest expense in 2014 was largely related to the increase in debt for the year.
Non-operating Expense: As a result of the refinancing of the Senior Secured Credit Facility in 2014 and 2013, we accelerated the unamortized deferred financing costs related to the previous borrowings, incurring a cost of $0.5 million ($0.3 million after tax) and $1.0 million ($0.6 million after tax), respectively.
Provision for Income Taxes: Our 2015, 2014 and 2013 tax provision was $83.0 million, $89.3 million and $76.0 million for an effective tax rate of 26.1%, 30.0% and 28.9%, respectively. The 2015 effective tax rate included an $11.6 million benefit related to the release of reserves for uncertain tax positions as well as other benefits recorded during the year. The 2014 and 2013 provisions benefitted from the release of reserves from uncertain tax positions. Excluding these items, the 2015, 2014 and 2013 effective tax rates were 30.9%, 30.6% and 30.7%, respectively. We believe the adjusted effective tax rate, which is a non-GAAP measure, is meaningful since it provides insight to the tax rate of ongoing operations.
Equity in Earnings from Affiliated Companies: Equity in earnings represents our portion of the earnings from our joint venture in Malaysia. Equity in earnings in 2015 also includes our portion of the earnings from our joint venture in the United Kingdom.
Net Income: Net income was $237.2 million or $2.44 per diluted share for the year ended December 31, 2015, compared to $209.4 million, or $2.12 per diluted common share for 2014 and $187.9 million, or $1.84 per diluted common share for 2013. Strong sales volume, particularly in the Commercial Aerospace market, coupled with good cost control led the growth in earnings from 2013 through 2015. Also see the table on page 26 for a reconciliation of GAAP net income from continuing operations to our adjusted “Non-GAAP” measure.
Significant Customers
Approximately 35%, 31% and 29% of our 2015, 2014 and 2013 net sales, respectively, were to Airbus Group and its subcontractors. Of the 35% of overall sales to Airbus Group and its subcontractors in 2015, 31% related to Commercial Aerospace market applications and 4% related to Space & Defense market applications. Approximately 31%, 32% and 34% of our 2015, 2014 and 2013 net sales, respectively, were to Boeing and related subcontractors. Of the 31% of overall sales to Boeing and its subcontractors in 2015, 29% related to Commercial Aerospace market applications and 2% related to Space & Defense market applications.
Financial Condition
In 2015, we ended the year with total debt, net of cash, of $524.7 million and used $4.3 million of free cash flow (cash provided by operating activities less cash paid for capital expenditures). In 2015, the Company bought back $146 million of shares, and as of December 31, 2015, has $204 million remaining under its currently authorized share repurchase program. We also paid $38.3 million of dividends in 2015. In 2016, we expect our capital spending to be in the range of $280 million to $320 million as we expand capacity in line with our outlook, resulting in expected positive free cash flow of $20 million to $60 million. We expect our typical use of cash in the first quarter of 2016, which will be funded by our available borrowings under our Facility.
30
We have a portfolio of derivatives related to currencies and interest rates. We monitor our counterparties and we only use those rated A- or better.
Liquidity
Our cash on hand at December 31, 2015 was $51.8 million and we had $417.9 million borrowings available under our credit facility. Our total debt as of December 31, 2015 was $576.5 million, an increase of $160.2 million from the December 31, 2014 balance. In August 2015, the Company issued $300 million in aggregate principal amount of 4.7% Senior Unsecured Notes due in 2025. The interest rate on these senior notes may be increased by 0.25% each time a credit rating applicable to the notes is downgraded. The maximum rate is 6.7%. The net proceeds of approximately $296.4 million were initially used to repay, in part, our Senior Unsecured Revolving Credit Facility (the “Facility”).
The level of available borrowing capacity fluctuates during the course of the year due to factors including capital expenditures, share repurchases and dividend payments, interest and variable compensation payments, changes to working capital, as well as timing of receipts and disbursements within the normal course of business.
Short-term liquidity requirements consist primarily of normal recurring operating expenses and working capital needs, capital expenditures, dividend payments and debt service requirements. We expect to meet our short-term liquidity requirements through net cash from operating activities, cash on hand and, if necessary, our revolving credit facility. As of December 31, 2015, long-term liquidity requirements consist primarily of obligations under our long-term debt obligations. We do not have any significant required debt repayments until June 2019 when the Facility expires.
Credit Facilities: We have a $700 million senior unsecured revolving credit facility which matures in September 2019. The initial interest rate (as well as the rate in effect for 2015) for the revolver is LIBOR + 1.25%. The interest rate ranges from LIBOR + 1% to a maximum of LIBOR + 2%, depending upon the Company’s leverage ratio. The Facility replaces the Company’s previous senior secured facility that would have expired in June 2018. As a result of the refinancing, the Company accelerated certain unamortized financing costs of the credit facility being replaced incurring a pretax charge of $0.5 million in 2014.
The Facility contains financial and other covenants, including, but not limited to, restrictions on the incurrence of debt and the granting of liens, as well as the maintenance of an interest coverage ratio and a leverage ratio. In accordance with the terms of the new facility, we are required to maintain a minimum interest coverage ratio of 3.50 (based on the ratio of EBITDA, as defined in the Credit Agreement, to interest expense) and may not exceed a maximum leverage ratio of 3.50 (based on the ratio of total debt to EBITDA) throughout the term of the Facility. In addition, the Facility contains other terms and conditions such as customary representations and warranties, additional covenants and customary events of default. The Facility is less restrictive than the prior agreement. As of December 31, 2015, we were in compliance with all debt covenants and expect to remain in compliance.
We have a $10.0 million borrowing facility for working capital needs of our Chinese entity with no outstanding balance at December 31, 2015. These funds can only be used locally and, accordingly, we do not include this facility in our borrowing capacity disclosures. The facility is guaranteed by Hexcel Corporation but is uncommitted and can be cancelled at any time.
Operating Activities: We generated $301.0 million in cash from operating activities during 2015, a decrease of $17.0 million from 2014 as higher earnings were offset by higher working capital usage. Cash generated from operating activities during 2014 was $318.0 million, an increase of $45.1 million from 2013 primarily from higher earnings.
Investing Activities: Cash used for investing activities, primarily for capital expenditures, was $305.3 million in 2015 compared to $270.4 million in 2014 and $194.9 million in 2013. In 2014, we acquired a 50% interest in Formax, a leading manufacturer of composite reinforcements, for $10.3 million. We accounted for this investment using the equity method. We acquired the remaining 50% interest in Formax for $12 million of which $9 million was paid when the transaction closed on January 5, 2016.
The Company is in the process of expanding capacity over a multi-year period, primarily for the manufacture of carbon fiber and prepregs to support aerospace growth. These capital projects require large expenditures and long lead times, some taking more than two years to complete. We are also constructing a $250 million facility in Roussillon, France that is expected to be operational in 2018. Over 90% of the $548.1 million in construction in progress as of December 31, 2015 represents spending on expansion projects primarily at our Decatur, Alabama, Salt Lake City, Utah, Duxford England and Roussillon, France facilities. We expect a majority of these projects to be placed in service during 2016.
Financing Activities: Financing activities were a use of cash of $10.9 million in 2015 as compared to a use of cash of $36.9 million in 2014. In August 2015, the Company issued $300 million aggregate principle amount of 4.7% Senior Unsecured Notes due in 2025. The interest rate on these senior notes may be increased by 0.25% each time a credit rating applicable to the notes is
31
downgraded. The maximum rate is 6.7%. The net proceeds of approximately $296.4 million were initially used to repay, in part, our Facility. In 2015 and 2014 we had borrowings, net of repayments, from our Facility of $135 million and $123 million, respectively. We paid $38 million in dividends in 2015. Also, in 2015 and 2014 we purchased $146 million and $160 million, respectively, of the Company’s stock as described below.
In June 2014, our Board authorized a plan to repurchase $150 million of our outstanding common stock (“2014 Repurchase Plan”), of which we spent $100 million in 2015 and was completed in the third quarter of 2015. In October 2015, our Board authorized the repurchase of an additional $250 million of the Company’s stock (“2015 Repurchase Plan”). We repurchased $46 million of our common stock under the 2015 Repurchase Plan.
In 2014, we repurchased $160 million of our common stock under the approved plans.
Financial Obligations and Commitments: We have no current debt maturities as of December 31, 2015. The next significant scheduled debt maturity will not occur until 2019, the year the Facility matures. In addition, certain sales and administrative offices, data processing equipment and manufacturing equipment and facilities are leased under operating leases.
Total letters of credit issued and outstanding under the Facility were $2.1 million as of December 31, 2015.
The following table summarizes the scheduled maturities as of December 31, 2015 of financial obligations and expiration dates of commitments for the years ended 2016 through 2020 and thereafter.
(In millions) |
|
2016 |
|
|
2017 |
|
|
2018 |
|
|
2019 |
|
|
2020 |
|
|
Thereafter |
|
|
Total |
|
|||||||
Senior unsecured credit facility due 2019 |
|
$ |
— |
|
|
$ |
— |
|
|
$ |
— |
|
|
$ |
280.0 |
|
|
$ |
— |
|
|
$ |
— |
|
|
$ |
280.0 |
|
4.7% senior notes due 2025 |
|
|
— |
|
|
|
— |
|
|
|
— |
|
|
|
— |
|
|
|
— |
|
|
|
300.0 |
|
|
|
300.0 |
|
Subtotal |
|
|
— |
|
|
|
— |
|
|
|
— |
|
|
|
280.0 |
|
|
|
— |
|
|
|
300.0 |
|
|
|
580.0 |
|
Operating leases |
|
|
8.7 |
|
|
|
6.4 |
|
|
|
4.5 |
|
|
|
2.4 |
|
|
|
1.7 |
|
|
|
4.2 |
|
|
|
27.9 |
|
Total financial obligations |
|
$ |
8.7 |
|
|
$ |
6.4 |
|
|
$ |
4.5 |
|
|
$ |
282.4 |
|
|
$ |
1.7 |
|
|
$ |
304.2 |
|
|
$ |
607.9 |
|
Letters of credit |
|
$ |
2.1 |
|
|
$ |
— |
|
|
$ |
— |
|
|
$ |
— |
|
|
$ |
— |
|
|
$ |
— |
|
|
$ |
2.1 |
|
Interest payments |
|
|
21.8 |
|
|
|
21.8 |
|
|
|
21.8 |
|
|
|
21.8 |
|
|
|
14.1 |
|
|
|
76.4 |
|
|
|
177.7 |
|
Estimated benefit plan contributions |
|
|
5.6 |
|
|
|
5.9 |
|
|
|
4.6 |
|
|
|
4.1 |
|
|
|
5.7 |
|
|
|
20.7 |
|
|
|
46.6 |
|
Other (a) |
|
|
13.1 |
|
|
|
0.5 |
|
|
|
0.5 |
|
|
|
0.4 |
|
|
|
0.4 |
|
|
|
— |
|
|
|
14.9 |
|
Total commitments |
|
$ |
51.3 |
|
|
$ |
34.6 |
|
|
$ |
31.4 |
|
|
$ |
308.7 |
|
|
$ |
21.9 |
|
|
$ |
401.3 |
|
|
$ |
849.2 |
|
|
(a) |
Other represents estimated spending for environmental matters at known sites and the acquisition of the remaining 50% of Formax in January 2016. |
As of December 31, 2015, we had $25.3 million of unrecognized tax benefits. This represents tax benefits associated with various tax positions taken, or expected to be taken, on domestic and international tax returns that have not been recognized in our financial statements due to uncertainty regarding their resolution. The resolution or settlement of these tax positions with the taxing authorities is at various stages. We are unable to make a reliable estimate of the eventual cash flows of the $25.3 million of unrecognized tax benefits.
For further information regarding our financial obligations and commitments, see Notes 5, 6, 7, 12 and 13 to the accompanying consolidated financial statements of this Annual Report on Form 10-K.
Critical Accounting Policies and Estimates
Our consolidated financial statements are prepared based upon the selection and application of accounting principles generally accepted in the United States of America, which require us to make estimates and assumptions about future events that affect amounts reported in our financial statements and accompanying notes. Future events and their effects cannot be determined with absolute certainty. Therefore, the determination of estimates requires the exercise of judgment. Actual results could differ from those estimates, and any such differences may be significant to the financial statements. The accounting policies below are those we believe are the most critical to the preparation of our financial statements and require the most difficult, subjective and complex judgments. Our other accounting policies are described in the accompanying notes to the consolidated financial statements of this Annual Report on Form 10-K.
32
As of December 31, 2015 we had $48.6 million in net deferred tax liabilities consisting of deferred tax assets of $139.5 million offset by deferred tax liabilities of $130.3 million and a valuation allowance of $57.8 million. As of December 31, 2014, we had $1.6 million in net deferred tax assets consisting of deferred tax assets of $181.9 million offset by deferred tax liabilities of $119.8 million and a valuation allowance of $60.5 million.
The valuation allowance as of December 31, 2015 relates primarily to certain net operating loss carryforwards of our foreign subsidiaries for which we have determined, based upon historical results and projected future book and taxable income levels, that a valuation allowance should continue to be maintained.
The determination of the required valuation allowance and the amount, if any, of deferred tax assets to be recognized involves significant estimates regarding the timing and amount of reversal of taxable temporary differences, future taxable income and the implementation of tax planning strategies. In particular, we are required to weigh both positive and negative evidence in determining whether a valuation allowance is required. Positive evidence would include, for example, a strong earnings history, an event that will increase our taxable income through a continuing reduction in expenses, and tax planning strategies indicating an ability to realize deferred tax assets. Negative evidence would include, for example, a history of operating losses and losses expected in future years.
Uncertain Tax Positions
Included in the unrecognized tax benefits of $25.3 million at December 31, 2015 was $20.8 million of tax benefits that, if recognized, would impact our annual effective tax rate. In addition, we recognize interest accrued related to unrecognized tax benefits as a component of interest expense and penalties as a component of income tax expense in the consolidated statements of operations. The Company recognized $0.6 million, $1.5 million, $0.7 million of interest expense and penalties related to the above unrecognized tax benefits in 2015, 2014 and 2013, respectively. The Company had accrued interest of approximately $2.2 million and $2.7 million as of December 31, 2015 and 2014, respectively. During 2015 we reversed $1.0 million of interest related to unrecognized tax benefits.
We are subject to taxation in the U.S. and various states and foreign jurisdictions. Foreign and U.S. state jurisdictions have statutes of limitations generally ranging from 3 to 5 years. Years still open to examination by U.S. (2012 onward) and foreign tax authorities in major jurisdictions include Austria (2012 onward), Belgium (2013 onward), France (2013 onward), Spain (2004 onward) and the U.K. (2014 onward). We are currently under examination in the U.S. and certain foreign tax jurisdictions.
As of December 31, 2015, we had uncertain tax positions for which it is reasonably possible that amounts of unrecognized tax benefits could significantly change over the next year. These uncertain tax positions relate to our tax returns from 2004 onward, some of which are currently under examination by certain U.S. and European tax authorities. Within the next twelve months, the Company believes it is reasonably possible that the total amount of unrecognized tax benefit associated with uncertain positions may be reduced. The Company believes it is reasonably possible that the total amount of unrecognized tax benefits disclosed as of December 31, 2015 may decrease approximately $11 to $14 million in the fiscal year ending December 31, 2016. Such possible decrease relates primarily to audit settlements and the expiration of statutes of limitation.
Retirement and Other Postretirement Benefit Plans
We maintain qualified defined benefit retirement plans covering certain current and former European employees, as well as nonqualified defined benefit retirement plans and retirement savings plans covering certain eligible U.S. and European employees, and participate in a union sponsored multi-employer pension plan covering certain U.S. employees with union affiliations. In addition, we provide certain postretirement health care and life insurance benefits to eligible U.S. retirees.
Under the retirement savings plans, eligible U.S. employees can contribute up to 75% of their compensation to an individual 401(k) retirement savings account. We make matching contributions equal to 50% of employee contributions, not to exceed 3% of employee compensation.
We have defined benefit retirement plans in the United Kingdom, Belgium, France and Austria covering certain employees of our subsidiaries in those countries. The defined benefit plan in the United Kingdom (the “U.K. Plan”), the largest of the European plans, was terminated in 2011 and replaced with a defined contribution plan. As of December 31, 2015, 34% of the total assets in the U.K. Plan were invested in equities and 29% of the total assets were invested in diversified growth funds. Equity investments are made with the objective of achieving a return on plan assets consistent with the funding requirements of the plan, maximizing portfolio return and minimizing the impact of market fluctuations on the fair value of the plan assets. As a result of an annual review of historical returns and market trends, the expected long-term weighted average rate of return for the U.K. Plan for the 2016 plan year will be 5.25% and for the other European plans as a group will be 3.0% to 4.0%.
33
We use actuarial models to account for our pension and postretirement plans, which require the use of certain assumptions, such as the expected long-term rate of return, discount rate, rate of compensation increase, healthcare cost trend rates, and retirement and mortality rates, to determine the net periodic costs of such plans. These assumptions are reviewed and set annually at the beginning of each year. In addition, these models use an “attribution approach” that generally spreads individual events, such as plan amendments and changes in actuarial assumptions, over the service lives of the employees in the plan. That is, employees render service over their service lives on a relatively smooth basis and therefore, the income statement effects of retirement and postretirement benefit plans are earned in, and should follow, the same pattern.
We use our actual return experience, future expectations of long-term investment returns, and our actual and targeted asset allocations to develop our expected rate of return assumptions used in the net periodic cost calculations of our funded European defined benefit retirement plans. Due to the difficulty involved in predicting the market performance of certain assets, there will almost always be a difference in any given year between our expected return on plan assets and the actual return. Following the attribution approach, each year’s difference is amortized over a number of future years. Over time, the expected long-term returns are designed to approximate the actual long-term returns and therefore result in a pattern of income and expense recognition that more closely matches the pattern of the services provided by the employees.
We annually set our discount rate assumption for retirement-related benefits accounting to reflect the rates available on high-quality, fixed-income debt instruments. The discount rate assumption used to calculate net periodic retirement related costs for the European funded plans was 3.45% for 2015, 4.40% in 2014 and 4.35% for 2013. The rate of compensation increase, which is another significant assumption used in the actuarial model for pension accounting, is determined by us based upon our long-term plans for such increases and assumed inflation. For the postretirement health care and life insurance benefits plan, we review external data and its historical trends for health care costs to determine the health care cost trend rates. Retirement and mortality rates are based primarily on actual plan experience.
Actual results that differ from our assumptions are accumulated and amortized over future periods and, therefore, generally affect the net periodic costs and recorded obligations in such future periods. While we believe that the assumptions used are appropriate, significant changes in economic or other conditions, employee demographics, retirement and mortality rates, and investment performance may materially impact such costs and obligations.
For more information regarding our pension and other postretirement benefit plans, see Note 7 to the accompanying consolidated financial statements of this Annual Report on Form 10-K.
Long-Lived Assets and Goodwill
We have significant long-lived assets. We review these assets for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. The assessment of possible impairment is based upon our ability to recover the carrying value of the assets from the estimated undiscounted future net cash flows, before interest and taxes, of the related operations. If these cash flows are less than the carrying value of such assets, an impairment loss is recognized for the difference between estimated fair value and carrying value. The measurement of impairment requires estimates of these cash flows and fair value. The calculation of fair value is determined based on discounted cash flows. In determining fair value a considerable amount of judgment is required to determine discount rates, market premiums, financial forecasts, and asset lives.
In addition, we review goodwill for impairment at the reporting unit level at least annually, and whenever events or changes in circumstances indicate that goodwill might be impaired. We have four reporting units within the Composite Materials segment, each of which are components that constitute a business for which discrete financial information is available and for which appropriate management regularly reviews the operating results. Within the Engineered Products segment, the reporting unit is the segment as it comprises only a single component. In 2015, the Company performed a qualitative assessment and determined that it was more likely than not that the fair values of our reporting units were not less than their carrying values and it was not necessary to perform the currently prescribed two-step goodwill impairment test.
34
We are involved in litigation, investigations and claims arising out of the normal conduct of our business, including those relating to commercial transactions, environmental, employment and health and safety matters. We estimate and accrue our liabilities resulting from such matters based upon a variety of factors, including the stage of the proceeding; potential settlement value; assessments by internal and external counsel; and assessments by environmental engineers and consultants of potential environmental liabilities and remediation costs. We believe we have adequately accrued for these potential liabilities; however, facts and circumstances may change, such as new developments, or a change in approach, including a change in settlement strategy or in an environmental remediation plan, that could cause the actual liability to exceed the estimates, or may require adjustments to the recorded liability balances in the future.
Our estimate of liability as a potentially responsible party (“PRP”) and our remaining costs associated with our responsibility to remediate the Lower Passaic River in New Jersey; Lodi, New Jersey; Kent, Washington; and other sites are accrued in the consolidated balance sheets. As of December 31, 2015 and 2014, our aggregate environmental related accruals were $2.9 million and $5.0 million, respectively. As of December 31, 2015 and 2014, $1.1 million and $3.2 million, respectively, were included in current other accrued liabilities, with the remainder included in other non-current liabilities. As related to certain environmental matters, except for the Lodi site, the accruals were estimated at the low end of a range of possible outcomes since no amount within the range is a better estimate than any other amount. If we had accrued, for those sites where we are able to estimate our liability, at the high end of the range of possible outcomes, our accrual would have been $28 million higher at December 31, 2015 and 2014.
These accruals can change significantly from period to period due to such factors as additional information on the nature or extent of contamination, the methods of remediation required, changes in the apportionment of costs among responsible parties and other actions by governmental agencies or private parties, or the impact, if any, of being named in a new matter.
Environmental remediation reserve activity for the three years ended December 31, 2015 was as follows:
|
|
For the year ended |
|
|||||||||
(In millions) |
|
December 31, |
|
|
December 31, |
|
|
December 31, |
|
|||
Beginning remediation accrual balance |
|
$ |
5.0 |
|
|
$ |
3.9 |
|
|
$ |
6.6 |
|
Current period expenses |
|
|
0.5 |
|
|
|
6.0 |
|
|
|
0.9 |
|
Cash expenditures |
|
|
(2.6 |
) |
|
|
(4.9 |
) |
|
|
(3.6 |
) |
Ending remediation accrual balance |
|
$ |
2.9 |
|
|
$ |
5.0 |
|
|
$ |
3.9 |
|
Capital expenditures for environmental matters |
|
$ |
7.1 |
|
|
$ |
7.3 |
|
|
$ |
4.6 |
|
|
Market Risks
As a result of our global operating and financing activities, we are exposed to various market risks that may affect our consolidated results of operations and financial position. These market risks include, but are not limited to, fluctuations in currency exchange rates, which impact the U.S. dollar value of transactions, assets and liabilities denominated in foreign currencies and fluctuations in interest rates, which impact the amount of interest we must pay on certain debt instruments. Our primary currency exposures are in Europe, where we have significant business activities. To a lesser extent, we are also exposed to fluctuations in the prices of certain commodities, such as electricity, natural gas, aluminum, acrylonitrile and certain chemicals. In addition, we have several contracts with both suppliers and customers that contain pricing adjustments based on the price of oil outside of a specified band.
We attempt to net individual exposures, when feasible, taking advantage of natural offsets. In addition, we employ or may employ interest rate swap agreements, cross-currency swap agreements and foreign currency forward exchange contracts for the purpose of hedging certain specifically identified interest rates and net currency exposures. The use of these financial instruments is intended to mitigate some of the risks associated with fluctuations in interest rates and currency exchange rates, but does not eliminate such risks. We do not use financial instruments for trading or speculative purposes.
Interest Rate Risks
A portion of our long-term debt bears interest at variable rates. From time to time we have entered into interest rate swap agreements to change the underlying mix of variable and fixed interest rate debt. These interest rate swap agreements have modified the percentage of total debt that is exposed to changes in market interest rates. Assuming a 10% favorable and a 10% unfavorable
35
change in the underlying weighted average interest rates of our variable rate debt and swap agreements, interest expense for 2015 of $14.2 million would have decreased to $13.7 million and increased to $14.7 million, respectively.
Interest Rate Swaps
At December 31, 2015, we have approximately $150 million of interest rate swaps that swap the LIBOR on our bank loan for a fixed rate at a weighted average rate of 0.85617%. These interest rate swaps are designated as cash flow hedges to floating rate bank loans and will expire between March 2016 and March 2017. The fair value of interest rate swap agreements is recorded in other non-current assets or other liabilities with a corresponding amount to Other Comprehensive Income.
Foreign Currency Exchange Risks
We operate nine manufacturing facilities in Europe, which generated approximately 47% of our 2015 consolidated net sales. Our European business activities primarily involve three major currencies — the U.S. dollar, the British pound sterling, and the Euro (“EUR”). We also conduct business and sell products to customers throughout the world. Most of the sales in these countries are denominated in U.S. dollars and they have local currency expenses. We also have a small manufacturing facility in China. Currency risk for these locations is not considered material.
In 2015, our European subsidiaries had third-party sales of $880 million of which approximately 67% were denominated in U.S. dollars, 30% were denominated in Euros and 3% were denominated in British pounds sterling. While we seek to reduce the exposure of our European subsidiaries to their sales in non-functional currencies through the purchase of raw materials in the same currency as that of the product sale, the net contribution of these sales to cover the costs of the subsidiary in its functional currency will vary with changes in foreign exchange rates, and as a result, so will vary the European subsidiaries’ percentage margins and profitability. For revenues denominated in the functional currency of the subsidiary, changes in foreign currency exchange rates increase or decrease the value of these revenues in U.S. dollars but do not affect the profitability of the subsidiary in its functional currency. The value of our investments in these countries could be impacted by changes in currency exchange rates over time, and could impact our ability to profitably compete in international markets.
We attempt to net individual functional currency positions of our various European subsidiaries, to take advantage of natural offsets and reduce the need to employ foreign currency forward exchange contracts. We attempt to hedge some, but not necessarily all, of the net exposures of our European subsidiaries resulting from sales they make in non-functional currencies. The benefit of such hedges varies with time and the foreign exchange rates at which the hedges are set. For example, when the Euro strengthened against the U.S. dollar, the benefit of new hedges placed was much less than the value of hedges they replaced that were entered into when the U.S. dollar was stronger. We seek to place additional foreign currency hedges when the dollar strengthens against the Euro or British pound. We do not seek to hedge the value of our European subsidiaries’ functional currency sales and profitability in U.S. dollars. We also enter into short-term foreign currency forward exchange contracts, usually with a term of ninety days or less, to hedge net currency exposures resulting from specifically identified transactions. Consistent with the nature of the economic hedge provided by such contracts, any unrealized gain or loss would be offset by corresponding decreases or increases, respectively, of the underlying transaction being hedged.
We have performed a sensitivity analysis as of December 31, 2015 using a modeling technique that measures the changes in the fair values arising from a hypothetical 10% adverse movement in the levels of foreign currency exchange rates relative to the U.S. dollar with all other variables held constant. The analysis covers all of our foreign currency hedge contracts. The sensitivity analysis indicated that a hypothetical 10% adverse movement in foreign currency exchange rates would have about a $3.1 million impact on our 2015 operating income. However, it should be noted that over time as the adverse movement (in our case a weaker dollar as compared to the Euro or the British pound sterling) continues and new hedges are layered in at the adverse rate, the impact would be more significant. For example, had we not had any hedges in place for 2015, a 10% adverse movement would have reduced our operating income by about $21 million.
Foreign Currency Forward Exchange Contracts
A number of our European subsidiaries are exposed to the impact of exchange rate volatility between the U.S. dollar and the subsidiaries’ functional currencies, being either the Euro or the British pound sterling. We entered into contracts to exchange U.S. dollars for Euros and British pound sterling through June 2018. The aggregate notional amount of these contracts was $417.5 million and $255.8 million at December 31, 2015 and 2014, respectively. The purpose of these contracts is to hedge a portion of the forecasted transactions of European subsidiaries under long-term sales contracts with certain customers. These contracts are expected to provide us with a more balanced matching of future cash receipts and expenditures by currency, thereby reducing our exposure to fluctuations in currency exchange rates. For the three years ended December 31, 2015, hedge ineffectiveness was immaterial. Cash flows associated with these contracts are classified within net cash provided by operating activities of continuing operations.
36
The activity, net of tax, in “accumulated other comprehensive loss” related to foreign currency forward exchange contracts for the years ended December 31, 2015, 2014 and 2013 was as follows:
(In millions) |
|
2015 |
|
|
2014 |
|
|
2013 |
|
|||
Unrealized (losses) gains at beginning of period |
|
$ |
(9.2 |