Form 10-K
Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, DC 20549

 


FORM 10-K

 


 

x ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2006

OR

 

¨ TRANSITION REPORT PURSUANT TO SECTION 13 or 15(d) OF THE SECURITIES AND EXCHANGE ACT OF 1934

For the transition period from                      to                     

Commission file number


000-51593

SunPower Corporation

(Exact Name of Registrant as Specified in Its Charter)

 


 

Delaware   94-3008969
(State or other jurisdiction of incorporation or organization)   (I.R.S. Employer Identification Number)
3939 North First Street, San Jose, CA   95134
(Address of Principal Executive Offices)   (Zip Code)

Registrant’s Telephone Number, Including Area Code: (408) 240-5500

Securities registered pursuant to Section 12(b) of the Act:

 

Title of each class

 

Name of each exchange on which registered

Class A Common Stock. $0.001 par value   NASDAQ Global Market

Securities registered pursuant to Section 12(g) of the Act:

None

(Title of Class)

 


Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes  x    No  ¨

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 of Section 15(d) of the Act. Yes  ¨    No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer. See definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act. (Check one):

 

Large Accelerated Filer  ¨   Accelerated Filer  x   Non-accelerated filer  ¨

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).    Yes  ¨    No  x

The aggregate market value of the voting stock held by non-affiliates of the registrant on June 30, 2006 was $228.8 million. Such aggregate market value was computed by reference to the closing price of the common stock as reported on the Nasdaq Global Market on June 30, 2006. For purposes of determining this amount only, the registrant has defined affiliates as including the executive officers and directors of registrant on June 30, 2006.

The number of shares outstanding of the registrant’s Common Stock as of February 23, 2007 was 77,299,661.

DOCUMENTS INCORPORATED BY REFERENCE

Parts of the registrant’s definitive proxy statement for the registrant’s Annual Meeting of Stockholders for the fiscal year ended December 31, 2006 are incorporated by reference in Items 10, 11, 12, 13 and 14 of Part III of this Annual Report on Form 10-K.

 



Table of Contents

TABLE OF CONTENTS

 

          Page

PART I

   3
  

Item 1: Business

   3
  

Item 1A: Risk Factors

   20
  

Item 1B: Unresolved Staff Comments

   58
  

Item 2: Properties

   58
  

Item 3: Legal Proceedings

   59
  

Item 4: Submission of Matters to a Vote of Security Holders

   59

PART II

   60
  

Item 5: Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

   60
  

Item 6: Selected Consolidated Financial Data

   62
  

Item 7: Management’s Discussion and Analysis of Financial Condition and Results of Operations

   64
  

Item 7A: Quantitative and Qualitative Disclosures About Market Risk

   84
  

Item 8: Financial Statements and Supplementary Data

   86
  

Item 9: Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

   135
  

Item 9A: Controls and Procedures

   135
  

Item 9B: Other Information

   135

PART III

   136
  

Item 10: Directors, Executive Officers and Corporate Governance

   136
  

Item 11: Executive Compensation

   136
  

Item 12: Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

   136
  

Item 13: Certain Relationships and Related Transactions, and Director Independence

   136
  

Item 14: Principal Accountant Fees and Services

   136

PART IV

   137
  

Item 15: Exhibits and Financial Statement Schedules

   137

 

2


Table of Contents

This Annual Report on Form 10-K of SunPower Corporation and its subsidiaries (“SunPower” or the “Company”, “Us”, “We” or “Our”) contains forward-looking statements. This Annual Report on Form 10-K also includes data, including forward-looking information, pertaining to PowerLight Corporation, our wholly-owned subsidiary, which we acquired on January 10, 2007. All statements in this Annual Report on Form 10-K, including those made by the management of SunPower, other than statements of historical fact, are forward-looking statements. These forward-looking statements are made pursuant to safe harbor provisions of the Private Securities Litigation Reform Act of 1995. Examples of forward-looking statements include statements regarding SunPower’s future financial results, operating results, business strategies, projected costs, products, competitive positions, management’s plans and objectives for future operations, and industry trends. These forward-looking statements are based on management’s estimates, projections and assumptions as of the date hereof and include the assumptions that underlie such statements. Forward-looking statements may contain words such as “may,” “will,” “should,” “could,” “would,” “expect,” “plan,” “anticipate,” “believe,” “estimate,” “predict,” “potential,” and “continue,” the negative of these terms, or other comparable terminology. Any expectations based on these forward-looking statements are subject to risks and uncertainties and other important factors, including those discussed below and in the section titled “Item 1A. Risk Factors.” Other risks and uncertainties are disclosed in SunPower’s prior Securities and Exchange Commission (“SEC”) filings. These and many other factors could affect SunPower’s future financial condition and operating results and could cause actual results to differ materially from expectations based on forward-looking statements made in this document or elsewhere by SunPower or on its behalf. SunPower undertakes no obligation to revise or update any forward-looking statements.

The following information should be read in conjunction with the Consolidated Financial Statements and the accompanying Notes to Consolidated Financial Statements included in this Annual Report on Form 10-K. All references to fiscal year apply to SunPower’s fiscal year which ends on the Sunday closest to December 31.

PART I

ITEM 1: BUSINESS

Company Overview

We design, develop, manufacture and market solar electric power products, or solar power products based on our proprietary processes and technologies. We have spent more than 15 years developing high performance solar cells, which are semiconductor devices that directly convert sunlight into electricity. We believe our solar cells have the highest conversion efficiency, a measurement of the amount of sunlight converted by the solar cell into electricity, available for the mass market. We also believe our solar cells provide the following benefits compared with conventional solar cells:

 

   

Superior performance, including the ability to generate up to 50% more power per unit area;

 

   

Superior aesthetics, with our uniformly black surface design which eliminates highly visible reflective grid lines and metal interconnect ribbons; and

 

   

Efficient use of silicon, a key raw material used in the manufacture of solar cells.

We offer solar power products including solar cells, solar panels and inverters which convert sunlight to electricity compatible with the utility network. Our initial solar sales efforts have been focused on residential and commercial applications where the high performance and superior aesthetics of our solar power products provide compelling customer benefits. We sell our products in many countries, principally in regions where government incentives have accelerated solar power adoption.

We produce our solar cells at our manufacturing facility in the Philippines. We currently operate four solar cell manufacturing lines in the Philippines, with a total rated manufacturing capacity of approximately 108

 

3


Table of Contents

megawatts per year. We have recently started construction on a second solar cell manufacturing facility in the Philippines, which is designed to house up to ten additional manufacturing lines. We expect three manufacturing lines in the new facility to be operational by the end of 2007, which would give us an aggregate rated manufacturing capacity of approximately 207 megawatts per year. Currently, most of our solar panels are assembled for us by a third-party subcontractor in China. We supplement this capacity with in-house production at our automated panel assembly factory located in the Philippines. We expect to produce up to 30 megawatts of solar panels per year from our first manufacturing line. The panel assembly factory has sufficient space to expand capacity to 90 megawatts per year. Our systems in North America also include branded inverters manufactured for us by multiple suppliers.

In addition, we offer imaging detectors based on our solar power technology primarily for medical imaging applications. Our imaging detectors are manufactured for us by Cypress Semiconductor Corporation (“Cypress”) and are processed and tested in our Sunnyvale, California facility. We sell our imaging detectors to OEMs. We also offer infrared detectors based on our high performance all back contact technology primarily for use in computing and mobile phone applications.

Acquisition of PowerLight Corporation

On January 10, 2007, we completed the previously announced acquisition of PowerLight Corporation (“PowerLight”). Upon the completion of the Merger, all of the outstanding shares of PowerLight, and a portion of each vested option to purchase shares of PowerLight, were cancelled, and all of the outstanding options to purchase shares of PowerLight (other than the portion of each vested option that was cancelled) were assumed by us in exchange for aggregate consideration of (i) approximately $120.7 million in cash plus (ii) a total of 5,708,723 shares of class A common stock, inclusive of (a) 1,601,839 shares of class A common stock which may be issued upon the exercise of assumed vested and unvested PowerLight stock options and (b) 1,675,881 shares of class A common stock issued to certain employees of the PowerLight business in connection with the Merger, which shares are subject to certain transfer restrictions and a repurchase option of the Company, both of which lapse over a two-year period under the terms of equity restriction agreements with employees of the PowerLight business.

PowerLight is a leading global provider of large-scale solar power systems. PowerLight designs, assembles, markets and sells solar electric power system technology that integrates solar cells and solar panels from SunPower and other suppliers to convert sunlight to electricity compatible with the utility network. PowerLight also provides solar power systems to end customers on a turn-key whole-solution basis by developing, engineering, procuring permits and equipment for, managing construction of, offering access to financing for, and providing monitoring, operations and maintenance services for large-scale roof-mounted and ground-mounted solar power applications. PowerLight’s customers include industrial, commercial and public sector entities, investors, utilities and production home builders. PowerLight’s solar power systems generate electricity over a system design life typically exceeding 25 years. PowerLight’s solar systems are principally designed to be used in large-scale applications exceeding 300 kilowatts, including the development of solar production home communities. PowerLight has completed or is in the process of completing over 300 projects worldwide, rated in aggregate at over 100 megawatts peak capacity for PowerLight customers in North America, Europe and Asia. In the U.S., PowerLight typically sells solar systems rated up to one megawatt of capacity to provide a supplemental, distributed source of electricity for a customer’s facility. In Europe and South Korea, PowerLight’s products and systems are often purchased by third-party investors as central station solar power plants, typically rated from one to 20 megawatts, which generate electricity for sale under tariff to regional and public utilities.

PowerLight designs and engineers complete solar power systems that combine its roof-mounted or ground-mounted products with electrical inverters and other standard components that connect to the customer’s existing electrical system or directly to the utility network. PowerLight solar system technology integrates solar cells and solar panels manufactured by SunPower and other suppliers, such as ErSol Solar Energy AG, Evergreen Solar,

 

4


Table of Contents

Inc., JingAo Solar Company, Ltd., Mitsui Comtek Corp., a distributor for Sanyo Electronics Co., Ltd., or Sanyo, and SunTech Power Co., Ltd., Q-Cells Aktiengesellschaft, Schott Solar, Inc. and Sharp Electronics (Europe) GmbH, which support their products with long-term manufacturing warranties of up to 25 years. PowerLight has contracted with some of these suppliers for multi-year supply agreements.

Where reference to PowerLight historical 2006 financial information is provided, such information is presented as of and for the nine months ended September 30, 2006, the latest available unaudited interim financial information. Selected unaudited financial information for PowerLight is as follows: Revenue of $140.1 million, cost of revenue of $120.6 million, research and development expense of $0.5 million and selling, general and administrative expenses of $15.1 million.

Certain Effects of the Merger on SunPower’s Financial Condition and Results of Operations

SunPower has historically operated within only one reportable segment. As a result of the completion of the Merger, the Company is presently evaluating whether or not the acquisition of the PowerLight business will result in the Company being required to report its financial results in more than one reportable segment.

The Merger is being accounted for under the purchase method of accounting, in accordance with the Statement of Financial Accounting Standards No. 141, Business Combinations. Under the purchase method of accounting, PowerLight’s results of operations and the impact of the completion of the Merger will be reflected in the Company’s financial statements on a prospective basis. The following table shows SunPower’s preliminary estimate of fiscal year 2007 to 2011 Merger related stock-based compensation, amortization of intangible assets and in-process research and development expenses:

 

(in thousands)    2007    2008    2009    2010    2011

Stock-based compensation

   $ 36,773    $ 36,863    $ 5,538    $ 5,066    $ 1,432

Amortization of intangible assets

     25,954      15,800      15,800      15,800      8,305

In-process research and development

     4,447      —        —        —        —  
                                  

Total

   $ 67,174    $ 52,663    $ 21,338    $ 20,866    $ 9,737
                                  

SunPower has not completed its final calculation of the purchase price allocation and therefore these amounts remain subject to change based on a final determination of the closing balance sheet of PowerLight as of January 10, 2007. SunPower anticipates that the estimated charges enumerated in the table above will be included in its future results of operations presented on a basis in accordance with generally accepted accounting principles (“GAAP”). In addition, SunPower may incur certain other Merger related charges and/or restructuring expenses in the future that are not reflected in the table above.

Our results of operations for fiscal year 2006 does not include any results of operations from the PowerLight business. However, PowerLight was a significant customer of SunPower accounting for 16% of our net revenue in 2006. We expect that the results of operations of the PowerLight business will be material to the overall results of the combined company in future periods and, accordingly, SunPower’s historical financial results are not expected to be indicative of its future results.

Corporate History

We were incorporated in 1985 by Dr. Richard Swanson to develop and commercialize high-efficiency photovoltaic, or solar electric cell technology. Our solar cells were initially used in solar concentrator systems, which concentrate sunlight using reflective dish systems. From 1988 to 2000, we focused our efforts on developing our high-efficiency solar cells and marketing our infrared detectors. In 2001, NASA used our solar cells in the Helios solar-powered airplane to achieve a world record powered-flight altitude of 96,863 feet. The initial public offering of our class A common stock occurred in November 2005, at which time our class A common stock commenced trading on the Nasdaq Global Market.

 

5


Table of Contents

Our headquarters are located at 3939 North First Street, San Jose, California 95134 and our telephone number is (408) 240-5500. Our website is www.sunpowercorp.com. SunPower and PowerLight are our registered trademarks and the SunPower and PowerLight logos are our trademarks. This Annual Report on Form 10-K also includes trade names, trademarks and service marks of other companies and organizations.

Relationship with Cypress Semiconductor Corporation

Cypress Semiconductor Corporation (“Cypress”) made a significant investment in SunPower in 2002. On November 9, 2004, Cypress completed a reverse triangular merger with us in which all of the outstanding minority equity interest of SunPower was retired, effectively giving Cypress 100% ownership of all of our then outstanding shares of capital stock but leaving our unexercised warrants and options outstanding.

As of February 23, 2007, Cypress holds, in the aggregate, 52,033,287 shares of class B common stock, representing approximately 70% of our total outstanding shares of common stock. Cypress also holds approximately 95% of the voting power of our total outstanding capital stock, as our class B common stock has 8 votes per share compared to one vote per share for our class A common. Cypress may convert into class A common stock at any time. Cypress has advised us that it does not have any current plans to distribute to its stockholders the shares of our class B common stock that it beneficially owns, although it may elect to effect such a distribution in the future.

We have entered into various agreements with Cypress including a master separation agreement, an employee matters agreement, a tax sharing agreement, a master transition services agreement, a wafer manufacturing agreement, a lease for certain manufacturing assets, an investor rights agreement, and an indemnification and insurance matters agreement. Our lease of a Cypress facility which we use for manufacturing in the Philippines contains an option for us to purchase the facility. See Note 3 of Notes to Consolidated Financial Statements.

Under the terms of the master transition services agreement, we will pay Cypress for the services provided to us, at Cypress’ cost or at the rate negotiated with Cypress for a period of three years following November 22, 2005 or upon a change of control, whichever occurs first. Under the terms of our lease agreement, we will pay Cypress at a rate equal to the cost to Cypress for the lease of our Philippines facility until the earlier of 10 years after November 22, 2005 or a change of control of our company. Thereafter, we will pay market rate rent for the facility for the remainder of the 15-year lease. Under the terms of the wafer manufacturing agreement, we pay Cypress to make infrared and imaging detector products for us at prices consistent with the then current Cypress transfer pricing, which is equal to the forecasted cost to Cypress to manufacture the wafers for the next three years or until a change of control of our company. See Note 3 of notes to our consolidated financial statements.

Cypress designs, develops, manufactures and markets a broad range of silicon-based products and solutions for various markets including consumer, computation, data communications, automotive and industrial. Leveraging a strong commitment to customer service and performance-based process and manufacturing expertise, Cypress’ product portfolio includes a selection of wired and wireless universal serial bus devices, complementary metal oxide semiconductor image sensors, timing solutions, network search engines, specialty memories, high-bandwidth synchronous and micro-power memory products, optical solutions, reconfigurable mixed-signal arrays. Cypress stock is traded on the New York Stock Exchange under the symbol “CY.”

Research and Development

We engage in extensive research and development efforts to improve solar cell efficiency and reduce manufacturing cost and complexity. Our goal is to increase efficiency in order to maintain our competitive advantage. Our research and development organization works closely with our manufacturing facility, our equipment suppliers and our customers to improve our solar cell design and lower manufacturing costs. In addition, we have dedicated employees who work closely with our current and potential suppliers of silicon ingots (a key raw material used in the manufacture of our solar cells) to develop specifications that meet our standards and ensure the high quality we require, while at the same time controlling costs. See “Risk Factors—

 

6


Table of Contents

The solar power industry is currently experiencing an industry-wide shortage of polysilicon. The prices that we pay for polysilicon have increased recently and we expect these price increases to continue, which may constrain our revenue growth and decrease our gross margins and profitability” and “The steps we have taken to increase the efficiency of our polysilicon utilization are unproven at volume production levels and may not enable us to realize the cost reductions we anticipate.”

Our research and development expenditures were approximately $9.7 million for the year ended December 31, 2006. We are a party to government contracts that enable us to more rapidly develop new technologies and pursue additional research opportunities while helping to offset our research and development expense. We entered into a cost-sharing research and development project with the National Renewable Energy Laboratory to fund the design of our next generation solar panels. Payments received under this contract help offset our research and development expense. This contract is expected to fund approximately $1.0 million per year of our research and development expense through May 2008. Our funding from government contracts offset our research and development expense by approximately 8% and 7% in 2006 and 2005, respectively.

PowerLight has selectively pursued contract research, product development and market development programs funded by various agencies of the U.S. federal and state governments to complement and enhance its own resources. These contracts are generally cost-shared between the funding agency and PowerLight. The contracts normally expire between six months and three years from their initiation. Funding from government grants is recorded as an offset to its research and development expenses.

From January 1, 2003 to September 30, 2006, PowerLight has received an aggregate of $5.8 million in research and development funding to further develop its technology. These and other research contracts it has obtained generally provide for development or improvement of solar power products or energy efficiency solutions.

In general, under these grants, we retain ownership rights to any intellectual property and technological developments resulting from the government funding, although the granting agencies usually retain “march-in” rights. March-in rights refer to the right of the U.S. government or government agency to require us to grant a license to the developed technology or products to a responsible applicant or, if we refuse, the government may grant the license itself. The government can exercise its march-in rights if it determines that action is necessary because it fails to achieve practical application of the technology or because action is necessary to alleviate health or safety needs, to meet requirements of U.S. federal regulations or to give the U.S. industry preference. Government contracts also usually require our submission of technical progress reports, most of which may become publicly available.

Our Products and Services

We currently design, develop, manufacture, market and sell solar power products and services, imaging detectors and infrared detectors based on our proprietary processes and technologies. SunPower also sells a line of branded inverters.

SunPower’s Products

Solar Cells

Solar cells are semiconductor devices that directly convert sunlight into electricity. Our current standard solar cell product is the A-300 solar cell, a silicon solar cell with a specified power value of 3.1 watts and a conversion efficiency of between 20% and 21.5%. We believe the A-300 solar cell has the highest conversion efficiency available for the mass market. Our A-300 solar cell is designed without highly reflective metal contact grids or current collection ribbons on the front of the solar cells. This feature enables our solar cells to be assembled into solar panels that exhibit a more uniform appearance than conventional solar panels. Our next generation solar cells are expected to deliver 3.3 watts and begin commercial production in the second quarter of 2007.

 

7


Table of Contents

Solar Panels

Solar panels are solar cells electrically connected together and encapsulated in a weatherproof package. We believe solar panels made with our solar cells are the highest efficiency solar panels available for the mass market. Because our A-300 solar cells are more efficient relative to conventional solar cells, when our solar cells are assembled into panels, the assembly cost per watt is less because more power can be incorporated into a given size package. Higher solar panel efficiency allows installers to mount a solar power system with more power within a given roof or site area and can reduce per watt installation costs.

Inverters

Inverters transform direct current, or DC, electricity produced by solar panels into the more common form of alternating current, or AC, electricity. Inverters are used in virtually every on-grid solar power system and typically feed power either directly into the home electrical circuit or into the utility grid. In North America, we sell a line of branded inverters specifically designed for use in residential and commercial systems. Our inverter product line currently includes five models spanning a power range of 2.5 to 5.2 kilowatts. Our packaged system designs optimize performance through the appropriate combination of these inverters with our solar panels. Our units are highly efficient, possessing above-average DC to AC conversion efficiency compared to other commercially available units in their class according to the California Energy Commission. Our inverters are manufactured for us by Xantrex and PV Powered. Xantrex is a worldwide leader in power electronics with a specialization in solar power conditioning components, while PV Powered concentrates specifically in the manufacturing of inverters for the solar electric market.

Imaging Detectors and Infrared Detectors

Our imaging detectors are high performance, back contact light sensor arrays for medical imaging applications where digital flat panel and computed tomography, or CT, systems are replacing conventional film-based X-ray imaging. Digital imaging is a demanding application for imaging detectors. X-rays pose a risk of radiation exposure, and this limits the practical dose that can be applied to the patient. A sensor must therefore maximize the conversion of incoming photons into electricity, the same fundamental challenge of solar power generation. Our imaging detectors are designed to have low current leakage and high sensitivity.

We also offer infrared detectors based on our high performance all back contact technology. Our infrared detectors are semiconductors which detect light signals primarily for use in computing and mobile phone applications. Our infrared detectors are used in devices such as personal digital assistants to beam information from one device to another.

PowerLight’s Products

PowerLight’s solar electric power system technology integrates solar cells and solar panels to convert sunlight to electricity. PowerLight’s systems are principally designed to be used in large-scale utility, commercial, public sector and production home applications.

PowerGuard® Roof System

PowerLight’s PowerGuard® Roof System is a roof-mounted solar panel mounting system that delivers reliable, clean electricity while insulating and protecting the roof. PowerGuard® is a proprietary, pre-engineered solar power roofing tile system. Each PowerGuard® tile consists of a solar laminate, lightweight cement substrate and styrofoam base. Designed for quick and easy installation, PowerGuard® tiles fit together with interlocking tongue-and-groove side surfaces that enable the system to resist wind uplift without the need to secure the system to the building by penetrating the roof covering or membrane. In addition to generating electricity, PowerGuard® roof systems also insulate and protect the roof membrane from ultraviolet rays and thermal degradation. This

 

8


Table of Contents

saves both heating and cooling energy expenses and extends the roof life. The PowerGuard® roof system has been tested and certified by Underwriters Laboratories, or UL, and has received a UL Class B fire rating which PowerLight believes facilitates obtaining building permits and inspector approvals.

PowerLight’s PowerGuard® system resists wind uplift without compromising the rooftop’s structural integrity. In comparison, conventional solar power systems typically penetrate the roof or require additional weight for stability. Systems that require drilling many holes into rooftops to install and secure solar panels may compromise the integrity of the roof and reduce its life span. To avoid drilling holes, certain other conventional systems add weight for stability against wind and weather, which may exceed weight limits for some commercial buildings’ roofs.

PowerGuard® tiles typically weigh approximately four pounds per square foot, which is supported by most commercial rooftops. PowerLight’s technology integrates this lightweight construction with a patented pressure equalizing design that has been tested to withstand winds of up to 140 mph. PowerGuard® roof systems have been installed in a broad range of climates, including California, Chicago, Hawaii, Boston, Massachusetts, Nevada, New Jersey, New York, Canada and Switzerland and a wide variety of building types, from rural single story warehouses to urban high rise structures.

PowerTilt™ Solar Power System

PowerLight’s PowerTilt™ System features pre-engineered solar panels that tilt at a 10-degree angle to generate up to 10% more annual energy output than traditional flat roof-mounted systems depending on geographic location and local climate conditions. PowerTilt™’s non-penetrating panels interlock for secure, rapid installation on rooftops without compromising the structural integrity of the roof.

Similar to PowerLight’s PowerGuard® product, PowerTilt™ is lightweight, weighing less than four pounds per square foot, and is installed without penetrating the roof surface. Sloped side and rear wind deflectors improve wind performance, allowing PowerTilt™ arrays to withstand winds up to 120 miles per hour.

Whereas PowerGuard® performance is optimized in constrained rooftop environments where it contributes to maximum power density, PowerTilt™ performance is optimized for larger roofs with less space constraints as well as underutilized tracks of land, such as ground reservoirs.

SunTile®—Roof Integrated System for Residential Market

SunTile® is a highly efficient solar power shingle roofing system utilizing SunPower’s A-300 solar cell technology that is designed to integrate with conventional residential roofing materials. SunTile® solar shingles are designed to replace multiple types of roof panels, including the most common concrete flat, low and high profile “S” tile and composition shingles. PowerLight believes that SunTile® is less visible on a roof than conventional solar technology because the solar panel is integrated directly into the roofing material instead of mounted onto the roof. SunTile® has a UL-listed Class A fire rating, which is the highest level of fire rating provided by Underwriters Laboratories Inc. SunTile® is designed to be incorporated by production home builders into the construction of their new homes communities.

Ground Mounted PowerTracker® Systems

PowerLight offers several types of ground-mounted solar power systems using its PowerTracker® technology. PowerTracker® is a single-axis tracking system that automatically pivots solar panels to track the sun’s movement throughout the day. We believe this tracking feature increases the amount of sunlight that is captured and converted into energy by up to 35% over flat or fixed-tilt systems depending on geographic location and local climate conditions. A single motor and drive mechanism can control 10 to 20 rows or 200+ kilowatts of

 

9


Table of Contents

solar panels. The multi-row feature represents a cost advantage for PowerLight’s customers over dual axis tracking systems, as such systems require more motors, drives, land, and power to operate per kilowatt capacity. The PowerTracker® system can be assembled onsite, and is easily scalable. PowerLight has installed ground-mounted systems integrating PowerTracker® in a wide range of geographical markets including Arizona, California, Hawaii, Nevada, New Jersey, Germany, Portugal, Spain and South Korea.

Fixed Tilt and PowerTracker® Systems for Parking Structures

PowerLight has developed and patented several designs for solar power systems for parking structures in multiple configurations. These dual use systems typically incorporate solar panels into the roof of a carport or similar structure to deliver onsite solar power while providing shade and protection. Aesthetic, standardized and scalable, they are well suited for parking lots adjacent to facilities. In addition, PowerLight has incorporated its PowerTracker® technology into certain of its systems for elevated parking structures to provide a differentiated product offering to its customers. PowerLight has completed complex parking structure-based systems for clients such as the U.S. Navy, the U.S. Postal Service and Johnson & Johnson.

Other System Offerings

PowerLight has other products that leverage its core systems. For example, its metal roof system is designed for sloped-metal roof buildings, which are used in some winery and warehouse applications. This solar power system is designed for rapid installation, and complements PowerLight’s PowerGuard® and PowerTilt™. PowerLight also offers other architectural products such as day lighting with translucent solar panels.

PowerLight’s Client Services

PowerLight provides its customers and partners with a variety of services, including system design, financial consulting and analysis, construction management and maintenance and monitoring.

System Design

PowerLight designs solar power systems taking into account the customer’s location, site conditions and energy needs. During the preliminary design phase, PowerLight conducts a site audit and building assessment for onsite generation feasibility and identifies energy efficiency savings opportunities. PowerLight models the performance of a proposed system design taking into account variables such as local weather patterns, utility rates and other relevant factors at the customer’s location. PowerLight also identifies necessary permits and design its systems to comply with applicable building codes and other regulations.

Financial Consulting and Analysis

PowerLight offers financial consulting services to its customers using various financing vehicles and government programs. PowerLight assists its customers in developing funding strategies for solar power projects depending on a customer’s size, cash flow and tax status. PowerLight has partnered with financial companies and organizations such as Deutsche Structured Finance GmbH, GE Commercial Finance and MuniMae, which provide project development financing and bonding for its customers. To date, PowerLight has successfully arranged financing for clients ranging from simple loans and tax-advantaged operating leases to long-term, multi-party power purchase agreements.

Construction Management

PowerLight offers general contracting services and employs project managers to oversee all aspects of system installation, including securing necessary permits and approvals. Subcontractors, typically electricians and roofers, usually provide the construction labor, tools and heavy equipment for solar system installation.

 

10


Table of Contents

PowerLight has developed relationships with subcontractors in many target markets, and requires subcontractors to be licensed, carry appropriate insurance and adhere to the local labor and payroll requirements. PowerLight’s construction management services include system testing, commissioning and management of utility network interconnection.

Maintenance and Monitoring

PowerLight also offers post-installation services in support of its solar power systems, including:

 

   

Operations and Maintenance: PowerLight’s systems have a design life in excess of 25 years. PowerLight typically provides its customers with a one, two or five-year parts and workmanship system warranty, after which the customer may extend the period covered by PowerLight’s warranty for an additional fee. PowerLight also passes through to customers long-term warranties from the original equipment manufacturers of certain system components. Warranties of 20-25 years from solar panels suppliers are standard, while inverters typically carry a 2-5 year warranty. PowerLight offers its customers a series of maintenance services ranging from its Standard Service level to its Plus Service level. Standard Service includes continuous remote monitoring of system performance and 72-hour on-site response to any system problem through a qualified local service technician. Plus Service includes annual preventive maintenance as well as certain forms of system testing.

 

   

Monitoring: PowerLight has developed its proprietary PowerLight Data Acquisition System, or DAS, to monitor system performance used in most of the systems it installs. The DAS continuously scans the performance of the system and local weather data and stores average data for the past 15 minutes in a data logger. An automated daily algorithm determines if systems are performing per specification, and an automated report is generated for PowerLight’s customer service department, allowing for proactive performance diagnostics and maintenance. Customers can access historical daily or real-time system performance data through PowerLight’s customer website www.mypowerlight.com. PowerLight’s customers often choose to install electronic kiosks for flat-panel displays to track performance information at their facility. PowerLight believes these displays enhance its brand and educate the public and prospective customers about solar power.

Energy Efficiency Consulting and Related Services

In addition to PowerLight’s solar power systems, PowerLight provides related PowerLight Energy Efficiency services which increase the total return on investment through an integrated, seamless solution. PowerLight provides custom solar power generation and demand side management solutions to minimize facility energy use and demand, improve building operation controls and increase the comfort level of building occupants. Its experienced personnel have completed projects that include:

 

   

Heating, ventilation and air conditioning upgrades: reduces energy use, facilitates building operations and improves the comfort level of inhabitants.

 

   

Variable frequency drives: reduces energy use by controlling motors installed on pumps, fans, compressors, chillers and boilers to optimize motor performance and reduce load.

 

   

Lighting efficiency services: reduces energy use by determining the optimal mix of energy efficient lighting though comprehensive assessment of light levels, spectrum and energy consumption.

 

   

Energy management systems: minimizes costs by balancing energy consumption and supply; achieves energy savings through equipment scheduling, automated controls/alarms and performance monitoring.

 

   

Building retro commissioning: offers a building “tune-up” to ensure optimal performance, specifically focusing on equipment scheduling and diagnostics, sequence of operations and control set points.

 

11


Table of Contents

Manufacturing

We manufacture our solar cells through our subsidiary, SunPower Philippines Manufacturing Limited, in a 215,000 square foot facility located near Manila in the Philippines. This plant began operations in the fall of 2004 where we currently operate four solar cell manufacturing lines, with a total rated manufacturing capacity of approximately 108 megawatts per year. We have recently started construction on a second solar cell manufacturing facility in the Philippines, which is designed to house up to ten additional manufacturing lines. We expect three manufacturing lines in the new facility to be operational by the end of 2007, which would give us an aggregate rated manufacturing capacity of approximately 207 megawatts per year. Currently, most of our solar panels are assembled for us by a third-party subcontractor in China. We supplement this capacity with in-house production at our automated panel assembly factory located in the Philippines. We expect to produce up to 30 megawatts of solar panels per year from our first manufacturing line. The panel assembly factory has sufficient space to expand capacity to 90 megawatts per year. Our systems in North America also include branded inverters manufactured for us by multiple suppliers.

In August 2006, we purchased a 344,000 square foot building in the Philippines. This facility is approximately 20 miles from our existing facilities and is being facilitized to house up to 10 solar cell manufacturing lines. We expect the first two or three lines in this facility to commence production of solar cells during 2007.

The solar cell value chain starts with high purity silicon called polysilicon. Polysilicon is melted and grown into crystalline ingots by companies specializing in ingot growth. We procure silicon ingots from these suppliers on a purchase order basis and then slice these ingots into wafers. We also purchase wafers and polysilicon from third-party vendors on a purchase order or contract basis. The ingots are sliced and the wafers are processed into solar cells in our Philippines manufacturing facility.

Our imaging detectors are manufactured by Cypress and then shipped to our facility in San Jose, California, and our subcontractor in the Philippines for back-end processing that includes electrical test, precision wafer dicing, measurement analysis, visual inspection and electrical contact preparation. During 2007, we anticipate that all back end processing of our image detector products will be transferred to the subcontractor in the Philippines.

Over the past 15 years, we have developed a core competency in processing thin silicon wafers. This proprietary semiconductor processing expertise involves specialized equipment and facilities that we believe allow us to process thin wafers while minimizing breakage and accurately controlling the effect of metallic contaminants and other non-desirable process conditions. This proprietary expertise is used in both our solar cell technology as well as for our imaging and infrared detector products.

PowerLight does not manufacture or develop the individual solar cells or solar panels it uses in its systems. Instead, it buys these materials from us as well as from other third-party solar cell and solar panel suppliers. PowerLight sources the balance of system components based on quality, performance and cost considerations. “Balance of system components” are in the components of a solar power system other than the solar panels, including mounting structures, tracking devices, inverters, charge controllers, grid interconnection equipment, and other devices depending upon the specific requirements of a particular system and project. PowerLight generally assembles proprietary components, such as cementitious coatings and certain adhesive applications, while it purchases generally available components from third-party suppliers.

PowerLight assembles certain of its products, such as its PowerGuard® and SunTile® products, at its assembly plant prior to shipment to the project location. Other products such as its PowerTracker® and PowerTilt™ systems are field assembled with components shipped directly from suppliers. PowerLight currently has the capacity to produce up to an aggregate of 20 megawatts of its PowerGuard® and SunTile® products per year, depending on product mix, in its Berkeley, California assembly plant. From time to time PowerLight supplements the capacity of its Berkeley facility by using third-party contractors.

 

12


Table of Contents

Supplier Relationships

Crystalline silicon is the leading commercial material for solar cells and is used in several forms, including single-crystalline, or monocrystalline silicon, multicrystalline, or polycrystalline silicon, ribbon and sheet silicon and thin-layer silicon. There is currently an industry-wide shortage of polysilicon, an essential raw material in the production of silicon solar cells. We believe that this shortage will continue through 2007, or potentially for a longer period. The prices that PowerLight pays for solar cells and solar panels have increased recently, and we expect polysilicon prices increase further in 2007.

SunPower directly competes with PowerLight’s other suppliers of solar cells and panels. As a result, the Merger has caused in one instance, and may continue to cause, solar cell or panel suppliers to reduce or terminate their business relationship with PowerLight. PowerLight believes it has historically had good relationships with most suppliers but expects that reductions or terminations could occur at some level. Any such reaction could adversely affect its ability to meet customer demand for its solar power systems, and materially adversely affect its results of operation and financial condition. SunPower may replace any lost solar cells or panels with its own inventory to mitigate the impact on the PowerLight business. However, such replacements may not be sufficient to fully address solar supply short falls experienced by the PowerLight business, and in any event would negatively impact SunPower’s earnings and revenues.

PowerLight is able to utilize solar panels from various manufacturers depending on power, performance and cost requirements. It historically partnered, and intends to continue to partner, with solar cell and panel manufacturers that offer the most advanced solar panel technologies and the highest quality products, including SunPower, ErSol Solar Energy AG, Evergreen Solar, Inc., JingAo Solar Company, Ltd., Mitsui Comtek Corp., a distributor for Sanyo Electronics Co., Ltd., or Sanyo, and SunTech Power Co., Ltd., Q-Cells Aktiengesellschaft, Schott Solar, Inc., Sharp Electronics Corporation and Sharp Electronics (Europe) GmbH.

PowerLight purchases solar panels and balance of system components on both a contracted and a purchase order basis. PowerLight has contracted with some of its suppliers for multi-year supply agreements. Under such agreements, PowerLight has annual minimum purchase obligations. Many of these agreements include liquidated damages if either party fails to perform. To date, PowerLight has not experienced supply disruptions under any of these multi-year supply agreements.

For suppliers operating under purchase orders, PowerLight typically presents non-binding forecasts of its annual or quarterly solar panel needs to its suppliers and then periodically issues purchase orders for specific projects. These suppliers are generally under no legal obligation to supply solar panels or other components or raw materials to PowerLight until they have accepted its purchase orders. PowerLight has experienced situations in which pricing terms and quantity commitments under accepted purchase orders were not honored as a result of the polysilicon shortage.

Customers

We currently sell our solar power products to system integrators, including PowerLight, and original equipment manufacturers or OEMs. System integrators typically design and sell complete systems that include our solar panels along with other system components. In North America, our system integrators also incorporate our inverters in their system offerings. OEMs typically incorporate our A-300 solar cells into specialty solar panels designed for specific applications.

We currently work with a small number of key customers who have specific expertise and capabilities in a given market segment or geographic region. As we expand our manufacturing capacity, we anticipate developing additional customer relationships in other markets and geographic regions to decrease our customer concentration and dependence. Conergy AG accounted for approximately 25% and 45% of our total combined revenue in fiscal 2006 and 2005, respectively. Solon AG accounted for approximately 24% and 16% of our total

 

13


Table of Contents

combined revenue in fiscal 2006 and 2005, respectively. PowerLight accounted for 16% of our total combined revenue in fiscal 2006. General Electric and its subcontracting partner, Plexus Corporation, accounted for approximately 10% of our total combined revenue in fiscal 2005. Currently, our largest customers for our solar power products are Conergy AG and Solon AG, our largest customers for our imaging detector products are General Electric and Plexus Corporation and our largest customer for our infrared detector products is Integration Associates, Inc.

PowerLight’s diversified customer base includes industrial, commercial and governmental organizations as well as production home builders. In the U.S., it has completed, or is in the process of completing, projects for Chevron Energy Services, FedEx Corporation, Johnson & Johnson, Lowe’s Corporation, Microsoft Corporation, Toyota Motor Company, the U.S. Navy, the U.S. Postal Service, a wide variety of state and local government agencies and districts and production home builders including Lennar Corporation, Premier Homes, Centex Corporation, The Grupe Company, William Lyon Homes, Standard Pacific Homes, Castle and Cook, Inc., Christopherson Homes, Inc., Community Dynamics, Inc. Davidson Communities, Edenbridge Homes, Victoria Homes, Inc. and Shea Homes.

PowerLight has completed or is in the process of completing over 300 projects of increasing size, with the majority of its recent projects having generating capacities rated in excess of 300 kilowatts. PowerLight’s customers include industrial, commercial and public sector entities, investors, utilities and production home builders. In June 2004, PowerLight completed the installation of a series of such systems in Germany that together represented the largest installed solar power project in the world, rated at over ten megawatts. In June 2006, PowerLight commenced groundbreaking in Serpa, Portugal on an 11 megawatt project on a single site that is expected to be completed in early 2007. For fiscal 2005, approximately half of PowerLight’s U.S. revenue was derived from public sector customers and the other half from the private sector.

Installations in Germany, California and New Jersey accounted for 0%, 33% and 22%, respectively, of PowerLight’s revenues for the nine months ended September 30, 2006 and 14%, 60% and 15% of PowerLight’s revenues, respectively, in fiscal 2005. PowerLight’s customers in the U.S. typically purchase systems rated up to one megawatt to provide electricity for a single facility, and up to three megawatts for multiple facilities. PowerLight has developed long-standing relationships with many of its customers. For the nine months ended September 30, 2006 and in 2005, an estimated 10% and 17%, respectively, of PowerLight’s revenues came from existing customers.

Marketing and Sales

We market and sell SunPower solar power products and detector products worldwide through a direct sales force. We have direct sales personnel or representatives in Germany, Singapore, Switzerland, Korea and the United States. Our marketing programs include conferences and technology seminars, sales training, public relations and advertising. Our sales and marketing group works closely with our research and development and manufacturing groups to align our product development roadmap. Our sales and marketing group also coordinates our product development activities, product launches and ongoing demand and supply planning with our development, operations and sales groups, as well as with our customers, direct sales representatives and distributors. We support our customers through our field application engineering and customer support organizations. Please see Note 15 of the notes to our consolidated financial statements for information regarding our revenue by geographic region.

PowerLight has a direct sales force and sales affiliates in the U.S., Europe and Korea. PowerLight also partners with certain value-added resellers, or VARs, and in Europe, site rights providers. Its VARs include Atersa, S.A., Elecnor, S.A., Chevron Energy and Solar Design Associates. Approximately 73% and 83% of its revenues for the nine months ended September 30, 2006 and for 2005, respectively, were derived through PowerLight’s direct sales force and sales affiliates, with the remainder from VARs. PowerLight provides warranty coverage on systems it sells through its direct sales force, sales affiliates and VARs. To the extent

 

14


Table of Contents

PowerLight sells through VARs, it may provide system design and support services while the VARs are responsible for construction, maintenance and service.

Backlog

Our sales typically rely upon standard purchase orders for delivery of products. Customer relationships are generally not subject to long-term contracts. However, we have entered into long-term supply agreements with certain customers. Some of these long-term supply agreements contain minimum firm purchase commitments. However, products to be delivered and the related delivery schedules are generally subject to revision by our customers. Accordingly, our backlog at any particular date is not necessarily representative of actual sales for any succeeding period and we believe that our backlog is not a meaningful indicator of future revenues.

PowerLight’s construction project revenues are based upon executed agreements entered into with customers for the delivery of functioning solar power systems which are generally completed within 6 to 18 months from the date of the agreement. Revenues and related costs are often subject to modification based on change orders issued by the customer or PowerLight, or changes in the estimated construction project costs. Construction project backlog represents the uncompleted portion of construction contracts. Backlog for PowerLight’s product and service sales represents the value of open customer purchase orders for such products and services.

Competition

The market for solar power products is competitive and continually evolving. We expect to face increased competition, which may result in price reductions, reduced margins or loss of market share. We compete with companies such as BP Solar, Evergreen Solar, Mitsubishi, Q-Cells, Suntech Power Holdings, Sanyo, First Solar and Sharp. Many of our competitors have established a stronger market position than ours and have larger resources and recognition than we have. In addition, universities, research institutions and other companies have brought to market alternative technologies such as thin films and concentrators, which may compete with our technology in certain applications. Furthermore, the solar power market in general competes with other sources of renewable energy and conventional power generation.

We believe that the key competitive factors in the market for solar cells and solar panels include:

 

   

power efficiency and performance;

 

   

price;

 

   

aesthetic appearance of solar cells and panels;

 

   

strength of distribution relationships; and

 

   

timeliness of new product introductions.

We believe that we compete favorably with respect to these factors.

We also compete with companies such as Hamamatsu Photonics and UDT Sensors in the market for high performance imaging detectors. In the market for infrared detectors, we compete with companies such as Vishay, Rohm and Agilent Technologies. We may face competition in the future from other manufacturers of imaging detectors, infrared detectors or alternative devices. The use of alternative devices, including low power, high data rate wireless protocols, may replace existing detectors and limit our market opportunity. Our current and future competitors may have longer operating histories, greater name recognition and greater financial, sales and marketing, technical and other resources than us or may develop technologies superior to those incorporated in our imaging detectors and infrared detectors. If we fail to compete successfully, we may be unable to expand our customer base for our imaging detectors and our business would suffer. We believe the key competitive factors for high performance imaging detectors include low current leakage and high sensitivity. In the market for

 

15


Table of Contents

infrared detectors, we believe the competitive factors include data transmission rates and price. We believe we compete favorably with these factors due in part to our proprietary processes and engineering expertise.

We may also face competition from some of our customers who may develop products or technologies internally which are competitive with our products, or who may enter into strategic relationships with or acquire existing solar power product providers or imaging or infrared detector product providers.

PowerLight’s solar products and services compete against other distributed generation technologies such as micro-turbines, sterling engines and fuel cells. We believe solar power has certain advantages when compared to these other power generating technologies. We believe solar power offers a stable power price compared to utility network power, which typically increases as fossil fuel prices increase. In addition, solar power systems are deployed in many sizes and configurations and do not produce air, water and noise emissions. Most other distributed generation technologies create environmental impacts of some sort. The high up-front cost of solar relative to utility network power, however, is the primary market barrier for on-grid applications.

In the large-scale, on-grid solar power systems market, PowerLight competes directly with a number of companies that manufacture, distribute or install solar power systems. Many of these companies also sell PowerLight’s products in addition to their own or those of other manufacturers. PowerLight’s primary competitors in the U.S. include Arizona Public Service Company, BP Solar International, Inc., a subsidiary of BP p.l.c., Conergy Inc., Dome-Tech Group, Eastwood Energy, EI Solutions, Inc., GE Energy, a subsidiary of General Electric Corporation, Global Solar Energy, Inc., a subsidiary of Solon AG, Power-Fab, Schott Solar, Inc., Solar Integrated Technologies, Inc., SPG Solar, Inc., Sun Edison LLC, SunTechnics Installation & Services, Inc., Thompson Technology Industries, Inc., and WorldWater & Power Corporation. PowerLight’s primary competitors in Europe include Conergy AG (through its subsidiaries AET Alternitive Energie Technik GmbH, SunTechnics Solartechnik GmbH and voltwerk AG), BP Solar, Solon AG, SAG Solarstrom AG, PV-Systemtechnik Gbr, and Taufer Solar GmbH. Other existing and potential competitors in the solar power market include universities and research institutions. PowerLight also expects that future competition will include new entrants to the solar power market offering new technological solutions. Furthermore, PowerLight expects competition to increase, especially as it enters the residential new construction market in the U.S. and other new markets and pursues additional applications for its products and services, which may result in price reductions, reduced margins or loss of market share. Additionally, PowerLight occasionally competes with distributed generation equipment suppliers such as Caterpillar, Inc. and Cummins Inc.

Many of PowerLight’s competitors outside the United States have greater name recognition, a more established distribution network and a larger installed base of customers than PowerLight. In addition, many of PowerLight’s competitors have well-established relationships with PowerLight’s current and potential resellers and their customers and have extensive knowledge of its target markets. As a result, its competitors may be able to devote greater resources to the research, development, promotion and sale of their products and respond more quickly to evolving industry standards and changing customer requirements than PowerLight can. Consolidation or strategic alliances among its competitors may strengthen these advantages and may provide them greater access to customers or new technologies. PowerLight may also face competition from some of its resellers, who may develop products internally that compete with its product and service offerings, or who may enter into strategic relationships with or acquire other existing solar power system providers. To the extent that government funding for research and development grants, customer tax rebates and other programs that promote the use of solar and other renewable forms of energy are limited, PowerLight competes for such funds, both directly and indirectly, with other renewable energy providers and their customers.

The principal elements of competition in the solar systems market include technical expertise, experience, delivery capabilities, diversity of product offerings, price, product performance, quality and reliability, and technical service and support. PowerLight believes that it competes favorably with respect to each of these factors, although it may be at a disadvantage in comparison to larger companies with broader product lines and greater technical service and support capabilities and financial resources. If the PowerLight business cannot compete successfully in the solar systems market, its operating results and financial condition will be adversely affected.

 

16


Table of Contents

Intellectual Property

We rely on a combination of patent, copyright, trade secret, trademark and contractual protection to establish and protect our proprietary rights. “SunPower” is our registered trademark in the United States for solar cells and panels. We are seeking registration of this mark in a number of foreign jurisdictions where we conduct business. We require our customers to enter into confidentiality and nondisclosure agreements before we disclose any sensitive aspects of our solar cells, technology or business plans, and we typically enter into proprietary information agreements with employees and consultants. Despite our efforts to protect our proprietary rights, unauthorized parties may attempt to copy or otherwise obtain and use our technology. It is difficult to monitor unauthorized use of technology, particularly in foreign countries where the laws may not protect our proprietary rights as fully as laws in the United States. In addition, our competitors may independently develop technology similar to ours.

As of December 31, 2006, in the United States, excluding PowerLight, we had eight issued patents and 17 patent applications pending. We are co-owners of four additional patents with Honda Giken Kogyo Kabushiki Kaisha. We also have twelve pending applications in foreign jurisdictions. Our issued patents expire between 2013 and 2023. We intend to continue assessing appropriate opportunities for patent protection of those aspects of our technology that we believe provide significant competitive advantages to us, and for licensing opportunities of new technologies relevant to our business.

Although we apply for patents to protect our technology, our revenue is not dependent on any particular patent we own and we currently rely on trade secret rights to protect our proprietary information and know-how. We also employ proprietary processes and customized equipment in our manufacturing facility. We do not know if our current or future patent applications will result in patents being issued with the scope of the claims we seek, if at all, or whether any patents we may receive will be challenged, invalidated or declared unenforceable.

As of December 31, 2006, including the U.S. and foreign countries, PowerLight had a total 61 issued patents and 47 pending patent applications. Pending patent applications or any future patent application may or may not result in a patent being issued with the scope of the claims PowerLight seeks, and issued patents may be challenged, invalidated or declared unenforceable. PowerLight intends to continue to seek patent protection for those aspects of its technology, designs, and methodologies and processes that it believes provide significant competitive advantages. PowerLight’s material patents primarily relate to PowerGuard®, PowerTilt™ and PowerTracker®. PowerLight holds registered trademarks for PowerLight®, PowerGuard®, PowerTracker® and SunTile® in the U.S., registered trademarks for PowerLight® and PowerGuard® in Europe, and pending trademark applications for PowerTilt™ in the U.S. It has not registered, and may not be able to register, these trademarks elsewhere.

PowerLight relies on a combination of copyright, trade secret, trademark and contractual protection to establish and protect its proprietary rights in technologies, designs, methodologies and processes that are not protected by patents. It also typically enters into confidentiality agreements with its employees and consultants. Its policy is to require its customers and partners to enter into confidentiality agreements before it discloses any sensitive aspects of its technology, designs or business plans.

Our precautions may not prevent misappropriation or infringement of our intellectual property, including the intellectual property of PowerLight. Third parties could infringe or misappropriate our patents, copyrights, trademarks, trade secrets and other proprietary rights. Our failure or inability to adequately protect its intellectual property could materially harm its business.

License Agreements Related to PowerTracker®.

In September 2002, PowerLight entered into a Technology Assignment and Services Agreement and other ancillary agreements with Jefferson Shingleton and MaxTracker Services, LLC, a New York limited liability

 

17


Table of Contents

company controlled by Mr. Shingleton. These agreements form the basis for PowerLight’s intellectual property rights in PowerLight’s PowerTracker® products. Under such agreements, as later amended, Mr. Shingleton assigned to PowerLight his MaxTracker™, MaxRack™, MaxRack Ballast™ and MaxClip™ products and all related intellectual property rights. Mr. Shingleton is also obligated to provide consulting services to PowerLight related to such technology until December 31, 2012 and is required to assign to PowerLight any enhancements he makes to the technology while providing such consulting services. Mr. Shingleton retains a first security interest in the patents and patent applications assigned until the earlier of the expiration of the patents, full payment by PowerLight to Mr. Shingleton of all of the royalty obligations under the Technology Assignment and Services Agreement, or the termination ofsuch agreement. In the event of PowerLight’s default under the Technology Assignment and Services Agreement, MaxTracker Services and Mr. Shingleton may terminate the agreements and the related assignments and cause the intellectual property rights assigned to PowerLight to be returned to Mr. Shingleton or MaxTracker Services, including patents related to PowerTracker®. In addition, upon such termination, PowerLight must grant Mr. Shingleton a perpetual, non-exclusive, royalty-free right and license to use, sell and otherwise exploit throughout the world any intellectual property MaxTracker Services or Mr. Shingleton developed during the provision of consulting services to PowerLight. Events of default by PowerLight which could enable Mr. Shingleton or MaxTracker Services to terminate the agreements and the related assignments and cause the intellectual rights assigned to PowerLight to be returned to Mr. Shingleton or MaxTracker Services include the following:

 

   

If PowerLight files a petition in bankruptcy or equivalent order or petition under the laws of any jurisdiction;

 

   

If a petition in bankruptcy or equivalent order or petition under the laws of any jurisdiction is filed against PowerLight which is not dismissed within 60 days of such filing;

 

   

If PowerLight’s assets are assigned for the benefit of creditors;

 

   

If PowerLight voluntarily or involuntarily dissolves;

 

   

If PowerLight fails to pay any amount due under the agreements when due and it does not remedy such failure to pay within 10 days of written notice of such failure to pay; or

 

   

If PowerLight defaults in the performance of any of its material obligations under the agreements when required (other than payment of amounts due under the agreements), and such failure is not remedied within 30 days of written notice to it of such default from Mr. Shingleton or MaxTracker Services. However, if such a default can reasonably be cured after the 30-day period, and PowerLight commences cure of such default within 30-day period and diligently prosecute that cure to completion, such default does not trigger a termination right unless and until PowerLight cease commercially reasonable efforts to cure such default.

In connection with the agreements, PowerLight is obligated to pay Mr. Shingleton royalties on certain products sold by PowerLight until 2012. If PowerLight sublicenses the acquired technology to a third party, it must pay Mr. Shingleton a percentage of any license fees it receives prior to January 1, 2013 and, if in connection with such third party license it receives any royalty fees from the third party licensee, PowerLight must pay Mr. Shingleton the royalty that would have been due had it made such sale directly rather than by such third-party licensee. PowerLight is obligated to make certain minimum royalty and consulting fee payments to Mr. Shingleton each year from 2005 to 2012. In connection with his provision of consulting services, PowerLight also granted Mr. Shingleton an option to acquire shares of PowerLight common stock.

Public Policy Considerations

Different policy mechanisms have been used by governments to accelerate the adoption of solar power. Examples of customer-focused financial mechanisms include capital cost rebates, feed-in tariffs, tax credits and net metering. Capital cost rebates provide money to customers depending on the size of a customer’s solar power

 

18


Table of Contents

system. Feed-in tariffs require utilities to pay customers for solar power system generation based on kilowatt-hours produced, at a rate generally guaranteed for a period of time. Tax credits reduce a customer’s taxes at the time the taxes are due. In the United States and other countries, net metering has often been used as a supplemental program in conjunction with other policy mechanisms. Under net metering, a customer can generate more energy than used, during which periods the electricity meter will spin backwards. During these periods, the customer “lends” electricity to the grid, retrieving an equal amount of power at a later time. Net metering encourages customers to size their systems to match their electricity consumption over a period of time, for example over a month or a year, rather than limiting solar generation to matching customers’ instantaneous electricity use.

In addition to the mechanisms described above, new market development mechanisms to encourage the use of renewable energy sources continue to emerge. For example, several states in the United States have adopted renewable portfolio standards, or RPS, which mandate that a certain portion of electricity delivered to customers come from a set of eligible renewable energy resources. In certain developing countries, governments are establishing initiatives to expand access to electricity, including initiatives to support off-grid rural electrification using solar power.

Environmental Regulations

SunPower and PowerLight use, generate and discharge toxic, volatile or otherwise hazardous chemicals and wastes in our research and development and manufacturing activities. We are subject to a variety of foreign, federal, state and local governmental laws and regulations related to the purchase, storage, use and disposal of hazardous materials. If we fail to comply with present or future environmental laws and regulations, we could be subject to fines, suspension of production or a cessation of operations. In addition, under some foreign, federal, state and local statutes and regulations, a governmental agency may seek recovery and response costs from operators of property where releases of hazardous substances have occurred or are ongoing, even if the operator was not responsible for the release or otherwise was not at fault.

We believe that we have all environmental permits necessary to conduct our business and expect to obtain all necessary environmental permits for our new facility. We believe that we have properly handled our hazardous materials and wastes and have appropriately remediated any contamination at any of our premises. We are not aware of any pending or threatened environmental investigation, proceeding or action by foreign, federal, state or local agencies, or third parties involving our current facilities. Any failure by us to control the use of, or to restrict adequately the discharge of, hazardous substances could subject us to substantial financial liabilities, operational interruptions and adverse publicity, any of which could materially and adversely affect our business, results of operations and financial condition.

Employees

As of December 31, 2006, SunPower had 1,572 full-time employees, including approximately 1,438 in manufacturing, 45 in research and development, 45 in sales and marketing and 44 in general and administrative. Of these full-time employees, 94 are located in San Jose, California, three are located in Frankfurt, Germany, one is located in Round Rock, Texas, one is located in Singapore, and 1,473 are located in the Philippines. None of our employees is covered by a collective bargaining agreement. Some of our services, including certain information technology, legal, tax, treasury and human resources services, are provided by Cypress pursuant to a master transition services agreement between us and Cypress, as further described in Note 3 of Notes to Consolidated Financial Statements. SunPower has never experienced a work stoppage and we believe relations with our employees are good.

As of December 31, 2006, PowerLight had 187 full-time employees, including 12 employees engaged in research and development, 63 employees in its projects (construction) department, 44 employees in sales and marketing, 15 employees in product assembly and 53 employees in general and administrative. None of

 

19


Table of Contents

PowerLight’s employees are represented by any collective bargaining agreements. PowerLight has never experienced a work stoppage and believes its employee relations are good.

Available Information

We make available our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or Section 15(d) of the Securities Exchange Act of 1934 free of charge on our website at www.sunpowercorp.com, as soon as reasonably practicable after they are electronically filed or furnished to the Securities and Exchange Commission (“SEC”). Additionally, copies of materials filed by us with the SEC may be accessed at the SEC’s Public Reference Room at 450 Fifth Street, Washington, D.C. or at http://www.sec.gov. For information about the SEC’s Public Reference Room, the public may contact 1-800-SEC-0330. The contents of our website are not incorporated into, or otherwise to be regarded as a part of, this Annual Report on Form 10-K.

ITEM 1A: RISK FACTORS

We are operating in a market environment that involves significant risks, many of which are beyond our control. The following risk factors may adversely impact our results of operations, cash flows and the market price of our stock. Although we believe that we have identified and discussed below the key risk factors affecting our business, there may be additional risks and uncertainties that are not presently known or that are not currently believed to be significant that may adversely affect our performance or financial condition.

Risks Related to Our Recent Merger with PowerLight

Although we expect the Merger to be beneficial for us, such benefits may not be realized because of integration difficulties or other challenges.

On January 10, 2007, we completed our previously announced merger, or the Merger, with PowerLight Corporation. PowerLight has global operations that will need to be integrated successfully in order for us to realize the benefits anticipated from the Merger. Realizing these benefits will require the meshing of technology, operations and personnel of SunPower and PowerLight into a single organization. We expect the integration to be a complex, time-consuming and expensive process that, even with proper planning and implementation, could cause significant disruption. The challenges that we may face include, but are not limited to, the following:

 

   

consolidating operations, including rationalizing corporate information technology and administrative infrastructures;

 

   

our management gaining sufficient experience with technologies and markets in which the PowerLight business is involved, which may be necessary to successfully operate and integrate the business;

 

   

coordinating sales and marketing efforts between the two companies:

 

   

overcoming any perceived adverse changes in business focus or model;

 

   

realizing synergies necessary to meet our long-term margin targets, given PowerLight’s historical margins;

 

   

coordinating and harmonizing research and development activities to accelerate introduction of new products and technologies with reduced cost;

 

   

preserving customer, supplier, distribution and other important relationships of SunPower and PowerLight and resolving any potential conflicts that may arise;

 

   

retaining key employees and maintaining employee morale;

 

   

addressing differences in the business cultures of SunPower and PowerLight;

 

   

coordinating and combining operations, relationships and facilities outside of the United States, which may be subject to additional constraints imposed by geographic distance, local laws and regulations; and

 

20


Table of Contents
   

creating a consolidated internal control over financial reporting structure so that we and our independent auditors can report on the effectiveness of our internal controls over financial reporting.

We may not be able to successfully integrate the operations of PowerLight in a timely manner, or at all. In addition, we may not realize the anticipated benefits and synergies of the Merger to the extent or when anticipated. Even if the integration of SunPower’s and PowerLight’s operations, products and personnel is successful, it may place a significant burden on our management resources. The diversion of management’s attention and any difficulties encountered in the transition and integration process could harm our business, financial condition and operating results.

The completion of the Merger could cause certain solar cell and panel suppliers to reduce or terminate their business relationship with our PowerLight business, which could adversely affect the ability of our PowerLight business to meet customer demand for its solar power systems and materially adversely affect our results of operations and financial condition.

As a result of the Merger, we now directly compete with certain suppliers of solar cells and panels to our PowerLight business. As a result, the Merger could cause one or more solar cell and panel suppliers to reduce or terminate their business relationship with our PowerLight business. After the Merger closed, we discontinued our purchasing relationship with one supplier, which was supplying panels to PowerLight under a purchase order relationship. This supplier will not supply solar panels to PowerLight beyond the first quarter of 2007. Other reductions or terminations, which may be significant, could occur. Any such reductions or terminations could adversely affect the ability of our PowerLight business to meet customer demand for its solar power systems, and materially adversely affect its results of operations and financial condition, which would likely materially adversely affect our results of operations and financial condition.

We will use commercially reasonable efforts to replace any lost solar cells or panels with our own inventory to mitigate the impact on the PowerLight business. However, such replacements may not be sufficient to fully address solar supply shortfalls experienced by our PowerLight business, and in any event could negatively impact our revenue and earnings as it forgoes selling such inventory to third parties.

The completion of the Merger could cause our customers to reduce or terminate their business relationship with us, which could adversely affect our ability to distribute our products and materially adversely affect our results of operations and financial condition.

PowerLight directly competes, as a distributor of solar panels and systems, with many of our customers. For instance, both Conergy AG and Solon AG, two of our largest customers, actively compete with our PowerLight business in the large-scale solar power plant market. The completion of the Merger could cause these customers to be concerned that we will reduce our level of business with them and perform a significant portion of our integration activities through our PowerLight business, thereby competing with certain of our customers. As a result, customers might reduce or terminate their business relationships with us, making it more difficult for us to sell our products and expand our business. Any such outcome could have a material adverse effect on our revenue and earnings.

We may be harmed by liabilities arising out of our acquisition of PowerLight and the indemnity they have agreed to provide may be insufficient to compensate us for these damages.

PowerLight has made representations and warranties to us in the Merger agreement, including those relating to the accuracy of its financial statements, the absence of litigation and environmental matters and the consents needed to transfer permits, licenses and third-party contracts in connection with our acquisition of PowerLight. To the extent that we are harmed by a breach of these representations and warranties, PowerLight’s stockholders have agreed to indemnify us for monetary damages from an escrowed proceeds account. In most cases we are required to absorb approximately the first $2.4 million before we are entitled to indemnification. The escrowed

 

21


Table of Contents

proceeds account is limited to $19.7 million in cash and 840,000 shares of our class A common stock, of which approximately one-half of the original escrow will be released (less any pending claims) at the first anniversary of the closing date. Our rights to recover damages under several provisions of the Merger agreement will also expire on the first anniversary of the closing date. After the first anniversary of the closing date we will be entitled to recover only limited types of losses, and our recovery will be limited to the amount available in the escrow fund at the time of a claim. The amount available in the escrow fund will be progressively reduced to zero over the period from the first to the fifth anniversaries of the closing date. We may incur liabilities from this acquisition which are not covered by the representations and warranties set forth in the agreement or which are non-monetary in nature. Consequently, our acquisition of PowerLight may expose us to liabilities for which we are not entitled to indemnification or our indemnification rights are insufficient.

PowerLight will need to obtain certain regulatory and third-party consents as a result of the Merger and, if it cannot obtain these consents, PowerLight’s and/or SunPower’s business may be harmed.

PowerLight is currently attempting to obtain certain regulatory and third-party consents which are triggered upon a change of control. If PowerLight is unable to do so, it may be forced to renegotiate these agreements or be exposed to regulatory sanctions. There can be no assurance that PowerLight will be able to obtain any required regulatory approvals or renegotiate or to negotiate new agreements on favorable terms, or at all.

We expect to continue to incur significant costs in connection with the Merger.

We expect our direct transaction costs of will total approximately $3.0 million in connection with the Merger, which costs will be capitalized as purchase price. We believe that we will also incur charges to operations during 2007 to reflect the costs of integrating the two companies, but cannot reasonably estimate those costs at this time. There can be no assurance that we will not incur additional material charges in subsequent quarters to reflect additional costs associated with the Merger.

Charges to earnings resulting from the application of the purchase method of accounting to the Merger may adversely affect the market value of our class A common stock.

In accordance with generally accepted accounting principles in the United States, or U.S. GAAP, we are accounting for the Merger using the purchase method of accounting, which may require an increase in the value of intangible assets and inventory to their respective fair values. Further, a portion of the purchase price paid in the Merger has been allocated to in-process research and development. These purchase accounting adjustments may result in material recurring and nonrecurring charges to earnings that could have a material adverse effect on the market value of our class A common stock. Under the purchase method of accounting, we will allocate the total purchase price to PowerLight’s net tangible assets and intangible assets based on their fair values as of the date of completion of the Merger and record the excess of the purchase price over those fair values as goodwill. We will incur amortization expense over the useful lives of amortizable intangible assets acquired in connection with the Merger. In addition, to the extent the value of goodwill and long lived assets becomes impaired, we may be required to incur material charges relating to the impairment of those assets. Further, we may be impacted by nonrecurring charges related to reduced gross profit margins from the requirement to adjust PowerLight’s inventory to fair value. Finally, we will incur ongoing compensation charges associated with assumed options, equity held by employees of PowerLight and subjected to equity restriction agreements, and restricted stock granted to employees of our PowerLight business. We estimate that these charges will aggregate approximately $37 million in each of 2007 and 2008 and lesser amounts in the succeeding two years. Any of the foregoing charges could have a material impact on our results of operations.

Risks Related to Our Business

SunPower and PowerLight share several risk factors common to both businesses. The following provides an integrated discussion of risk factors for SunPower and PowerLight. Where appropriate, the title heading to the risk factor indicates the business to which the risk relates.

 

22


Table of Contents

The solar power industry is currently experiencing an industry-wide shortage of polysilicon. The prices that we pay for polysilicon have increased recently and we expect prices to remain at or above current levels for the foreseeable future, which may constrain the revenue growth and decrease gross margins and profitability for SunPower and PowerLight.

Polysilicon is an essential raw material in our production of photovoltaic, or solar, cells and also in the solar cells and modules used by our PowerLight business to produce solar power systems. Polysilicon is created by refining quartz or sand. Polysilicon is melted and grown into crystalline ingots by companies specializing in ingot growth. We procure silicon ingots from these suppliers on a contractual basis and then slice these ingots into wafers. We also purchase wafers and polysilicon from third-party vendors. The ingots are sliced and the wafers are processed into solar cells in our Philippines manufacturing facility.

There is currently an industry-wide shortage of polysilicon, which has resulted in significant price increases. We expect that the average price of polysilicon will continue to increase. Increases in polysilicon prices have in the past increased our manufacturing costs and may impact our manufacturing costs and net income in the future. As demand for solar cells has increased, many of our principal competitors have announced plans to add additional manufacturing capacity. As this manufacturing capacity becomes operational, it will increase the demand for polysilicon and further exacerbate the current shortage. Polysilicon is also used in the semiconductor industry generally and any increase in demand from that sector will compound the shortage. The production of polysilicon is capital intensive and adding additional capacity requires significant lead time. While we are aware that several new facilities for the manufacture of polysilicon are under construction, we do not believe that the supply imbalance will be remedied in the near term. We expect that polysilicon demand will continue to outstrip supply throughout 2007 and potentially for a longer period.

Although we have contracted with vendors for what we believe will be an adequate supply of silicon ingots through 2007, our estimates regarding our supply needs may not be correct and our purchase orders and contracts may be cancelled by our suppliers. The volume and pricing associated with these purchase orders and contracts may be changed by our suppliers based on market conditions. Our purchase orders are generally non-binding in nature. If our suppliers were to cancel our purchase orders or change the volume or pricing associated with these purchase orders and/or contracts, we may be unable to meet customer demand for our products, which could cause us to lose customers, market share and revenue. This would have a material negative impact on our business and operating results. If our manufacturing yields decrease significantly, we add manufacturing capacity faster than currently planned or our suppliers cancel or fail to deliver, we may not have made adequate provision for our polysilicon needs for the balance of the year. In addition, we currently purchase polysilicon and make advances to suppliers to secure future polysilicon supply, which adversely affects our liquidity. These advances may in the future take the form of equity issuances, which would result in additional dilution to our stockholders.

In addition, since some of our silicon ingot and wafer arrangements are with suppliers who do not themselves manufacture polysilicon but instead purchase their requirements from other vendors, these suppliers may not be able to obtain sufficient polysilicon to satisfy their contractual obligations to us.

There are a limited number of polysilicon suppliers. Many of our competitors also purchase polysilicon from our suppliers. Since we have only been purchasing polysilicon in bulk for slightly more than one year, which is a shorter period than our competitors, these other competitors have longer and perhaps stronger relationships with our suppliers than we do. Many of them also have greater buying power than we do. Some of our competitors also have inter-locking board members with their polysilicon suppliers or have entered into joint ventures with their suppliers. Additionally, a substantial amount of our future polysilicon requirements are expected to be sourced by new suppliers that have not yet proven their ability to manufacture large volumes of polysilicon. In some cases we expect that new entrants will provide us with polysilicon and ingots. The failure of these new entrants to produce adequate supplies of polysilicon and/or ingots in the quantities and quality we require could adversely affect our ability to grow production volumes and revenues and could also result in a decline in our gross profit margin. Since we have committed to significantly increase our manufacturing output, an inadequate supply of polysilicon would harm us more than it would harm many of our competitors.

 

23


Table of Contents

The inability to obtain sufficient polysilicon, ingots or wafers at commercially reasonable prices or at all would adversely affect our ability to meet existing and future customer demand for our products and could cause us to make fewer shipments, lose customers and market share and generate lower than anticipated revenue, thereby seriously harming our business, financial condition and results of operations.

A limited number of the customers of SunPower and PowerLight are expected to continue to comprise a significant portion of our revenues and any decrease in revenue from these customers could have an adverse effect on us.

Even though our customer base is expected to increase and our revenue streams to diversify as a result of the Merger, a large portion of our net revenues will likely continue to depend on sales to a limited number of customers. Inclusive of sales to PowerLight, during 2006, sales to our top three customers accounted for 65% of our revenues. Currently, our largest customers for our solar power products are Conergy AG, or Conergy, and Solon AG, or Solon. Conergy accounted for approximately 25% of our revenue for 2006. Solon accounted for approximately 24% of our revenue for 2006. PowerLight accounted for approximately 16% of our revenue for 2006. The loss of sales to any of these customers would have a significant negative impact on our business. Our agreements with these customers may be cancelled if we fail to meet certain product specifications or materially breach the agreement or in the event of bankruptcy, and our customers may seek to renegotiate the terms of current agreements or renewals. Most of the solar panels we sell to the European market are sold through our agreement with Conergy, and we may enter into similar agreements in the future.

We currently sell to a relatively small number of customers, and we expect our operating results will likely continue to depend on sales to a relatively small number of customers for the foreseeable future, as well as the ability of these customers to sell solar power products that incorporate our solar cells. Our customer relationships have been developed over a short period of time and are generally in their preliminary stages. We cannot be certain that these customers will generate significant revenue for us in the future or if these customer relationships will continue to develop. If our relationships with our other customers do not continue to develop, we may not be able to expand our customer base or maintain or increase our revenue. This is exacerbated by our current manufacturing constraints for solar cells which limit our ability to sell to other customers and our contractual arrangements which require us to sell part of our future output to Conergy and Solon. In addition, our business is affected by competition in the market for the end products that each of Conergy and Solon sell, and any decline in their business could harm our business and cause our revenue to decline.

SunPower and PowerLight’s operating results will be subject to fluctuations and are inherently unpredictable; if we fail to meet the expectations of securities analysts or investors, our stock price may decline significantly.

Our quarterly revenue and operating results will be difficult to predict and SunPower’s and PowerLight’s results have in the past fluctuated from quarter to quarter. It is possible that our operating results in some quarters will be below market expectations. Our quarterly operating results will be affected by a number of factors, including:

 

   

the average selling price of SunPower’s solar cells and panels and imaging detectors and our PowerLight business’ solar power systems;

 

   

the availability and pricing of raw materials, particularly polysilicon;

 

   

the availability, pricing and timeliness of delivery of raw materials and components, particularly solar panels and balance of systems components, including steel, necessary for our PowerLight business’ solar power systems to function;

 

   

the rate and cost at which we are able to expand our manufacturing and product assembly capacity to meet customer demand, including costs and timing of adding personnel;

 

   

the amount and timing of sales of our PowerLight business’ systems, especially medium and large-scale projects, which may individually cause severe fluctuations in our revenue;

 

24


Table of Contents
   

our ability to meet project completion schedules and the corresponding revenue impact under the percentage-of-completion method of recognizing revenue for projects of our PowerLight business;

 

   

construction cost overruns, including those associated with the introduction of new products;

 

   

the impact of seasonal variations in demand and/or revenue recognition linked to construction cycles and weather conditions;

 

   

timing, availability and changes in government incentive programs;

 

   

unplanned additional expenses such as manufacturing failures, defects or downtime;

 

   

acquisition and investment related costs;

 

   

unpredictable volume and timing of customer orders, some of which are not fixed by contract but vary on a purchase order basis;

 

   

the loss of one or more key customers or the significant reduction or postponement of orders from these customers;

 

   

geopolitical turmoil within any of the countries in which we operate or sell products;

 

   

foreign currency fluctuations, particularly in the Euro, Philippine peso or South Korean won;

 

   

the effect of currency hedging activities;

 

   

our ability to establish and expand customer relationships;

 

   

changes in our manufacturing costs;

 

   

changes in the relative sales mix of our solar cells, solar panels and imaging detectors;

 

   

the availability, pricing and timeliness of delivery of other products, such as inverters necessary for our solar power products to function;

 

   

our ability to successfully develop, introduce and sell new or enhanced solar power products in a timely manner, and the amount and timing of related research and development costs;

 

   

the timing of new product or technology announcements or introductions by our competitors and other developments in the competitive environment;

 

   

the willingness of competing solar cell and panel suppliers to continue product sales to our PowerLight business;

 

   

increases or decreases in electric rates due to changes in fossil fuel prices or other factors; and

 

   

shipping delays.

We will base our planned operating expenses in part on our expectations of future revenue, and a significant portion of our expenses will be relatively fixed in the short term. If revenue for a particular quarter is lower than we expect, we likely will be unable to proportionately reduce our operating expenses for that quarter, which would harm our operating results for that quarter. This may cause us to miss analysts’ guidance or any future guidance announced by us. If we fail to meet or exceed analyst or investor expectations or our own future guidance, even by a small amount, our stock price could decline, perhaps substantially.

SunPower has four solar cell production lines which are located in our manufacturing facilities in the Philippines, and if we experience interruptions in the operation of these production lines or are unable to add additional production lines, it would likely result in lower revenue and earnings than anticipated.

SunPower currently operates four solar cell manufacturing lines which are located at our manufacturing facilities in the Philippines. If our current or future production lines were to experience any problems or

 

25


Table of Contents

downtime, including those caused by intermittent electricity supply at our Philippines facilities, we would be unable to meet our production targets and our business would suffer. If any piece of equipment were to break down or experience downtime, it could cause our production lines to go down. We have recently acquired a second solar cell manufacturing facility nearby our existing facility in the Philippines. This expansion has required and will continue to require significant management attention, a significant investment of capital and substantial engineering expenditures and is subject to significant risks including:

 

   

we may experience cost overruns, delays, equipment problems and other operating difficulties;

 

   

we may experience difficulties expanding our processes to larger production capacity;

 

   

our custom-built equipment may take longer and cost more to engineer than planned and may never operate as designed; and

 

   

we are incorporating first-time equipment designs and technology improvements, which we expect to lower unit capital and operating costs, but this new technology may not be successful.

If we experience any of these or similar difficulties, we may be unable to complete the addition of new production lines on schedule in order to expand our manufacturing facilities and our manufacturing capacity could be substantially constrained. If this were to occur, our per-unit manufacturing costs would increase, we would be unable to increase sales as planned and our earnings would likely be materially impaired.

SunPower has recently established a captive solar panel assembly factory, and, if this panel manufacturing factory is unable to produce high quality solar panels at commercially reasonable costs, our revenue growth and gross margin could be adversely affected.

SunPower has constructed a new 30 megawatt automated solar panel assembly factory in the Philippines. This factory commenced commercial production during the fourth quarter of 2006. Much of the manufacturing equipment and technology in this factory is new and unproven in volume production of solar panels. In the event that this factory is unable to ramp production with commercially reasonable yields and competitive production costs, our anticipated revenue growth and gross margin will be adversely affected.

If SunPower does not achieve satisfactory yields or quality in manufacturing our solar cells, our sales could decrease and our relationships with our customers and our reputation may be harmed.

The manufacture of solar cells is a highly complex process. Minor deviations in the manufacturing process can cause substantial decreases in yield and in some cases, cause production to be suspended or yield no output. SunPower has from time to time experienced lower than anticipated manufacturing yields. This often occurs during the production of new products or the installation and start-up of new process technologies or equipment. For example, we recently acquired a building to house our second solar cell manufacturing facility near our existing facility. As we expand our manufacturing capacity and bring additional lines or facilities into production, we may experience lower yields initially as is typical with any new equipment or process. We also expect to experience lower yields as we continue the initial migration of our manufacturing processes to thinner wafers. If we do not achieve planned yields, our product costs could increase, and product availability would decrease resulting in lower revenues than expected.

Existing regulations and policies and changes to these regulations and policies may present technical, regulatory and economic barriers to the purchase and use of solar power products, which may significantly reduce demand for SunPower and PowerLight products.

The market for electricity generation products is heavily influenced by foreign, U.S. federal, state and local government regulations and policies concerning the electric utility industry, as well as policies promulgated by electric utilities. These regulations and policies often relate to electricity pricing and technical interconnection of customer-owned electricity generation. In the U.S. and in a number of other countries, these regulations and

 

26


Table of Contents

policies are being modified and may continue to be modified. Customer purchases of, or further investment in the research and development of, alternative energy sources, including solar power technology, could be deterred by these regulations and policies, which could result in a significant reduction in the potential demand for the solar power products of SunPower and PowerLight. For example, without a regulatory mandated exception for solar power systems, utility customers are often charged interconnection or standby fees for putting distributed power generation on the electric utility network. These fees could increase the cost to our customers of using our solar power products and make them less desirable, thereby harming our business, prospects, results of operations and financial condition.

We anticipate that our solar power products and their installation will be subject to oversight and regulation in accordance with national and local ordinances relating to building codes, safety, environmental protection, utility interconnection and metering and related matters. It is difficult to track the requirements of individual states and design equipment to comply with the varying standards. Any new government regulations or utility policies pertaining to our solar power products may result in significant additional expenses to us and our resellers and their customers and, as a result, could cause a significant reduction in demand for our solar power products.

The reduction or elimination of government and economic incentives could cause revenue to decline for SunPower and PowerLight.

We believe that the near-term growth of the market for on-grid applications, where solar power is used to supplement a customer’s electricity purchased from the utility network or sold to a utility under tariff, depends in large part on the availability and size of government and economic incentives. Because a majority of sales for SunPower and PowerLight are in the on-grid market, the reduction or elimination of government and economic incentives may adversely affect the growth of this market or result in increased price competition, both of which could cause our revenue to decline.

Today, the cost of solar power exceeds retail electric rates in many locations. As a result, federal, state and local government bodies in many countries, most notably Germany, Japan, Spain, Italy, Portugal, South Korea and the United States, have provided incentives in the form of feed-in tariffs, rebates, tax credits and other incentives to end users, distributors, system integrators and manufacturers of solar power products to promote the use of solar energy in on-grid applications and to reduce dependency on other forms of energy. These government economic incentives could be reduced or eliminated altogether. For example, Germany has been a strong supporter of solar power products and systems and political changes in Germany could result in significant reductions or eliminations of incentives, including the reduction of feed-in tariffs more rapidly than required by current law. Some solar program incentives expire, decline over time, are limited in total funding or require renewal of authority. Net metering and other operational policies in California, Japan or other markets could limit the amount of solar power installed there. Reductions in, or eliminations or expirations of, governmental incentives could result in decreased demand for and lower revenue from our products. Changes in the level or structure of a renewable portfolio standard could also result in decreased demand for and lower revenue from our products.

Changes in tax laws or fiscal policies may decrease the return on investment for customers of our PowerLight business, and for certain investors in its projects, which could decrease demand for its products and services and harm its business.

In the nine months ended September 30, 2006, 22% of PowerLight’s revenues were derived from sales of solar power systems to companies formed to develop and operate solar power generation facilities. Such companies have been formed by third party investors with some frequency in the United States, Germany, Spain, South Korea and Portugal, as these investors seek to benefit from government mandated feed-in tariffs and similar legislation. PowerLight’s business depends in part on the continuing formation of such companies and the potential revenue source they represent. In deciding whether to form and invest in such companies, potential

 

27


Table of Contents

investors weigh a variety of considerations, including their projected return on investment. Such projections are based on current and proposed federal, state and local laws, particularly tax legislation. Changes to these laws, including amendments to existing tax laws or the introduction of new tax laws, tax court rulings as well as changes in administrative guidelines, ordinances and similar rules and regulations could result in different tax assessments and may adversely affect an investor’s projected return on investment, which could have a material adverse effect on PowerLight’s business and results of operations.

Problems with product quality or product performance, including defects, in our solar cells could result in a decrease in customers and revenue, unexpected expenses and loss of market share for SunPower and PowerLight.

SunPower’s solar cells are complex and must meet stringent quality requirements. Products as complex as ours may contain undetected errors or defects, especially when first introduced. For example, our solar cells and solar panels may contain defects that are not detected until after they are shipped or are installed because we cannot test for all possible scenarios. These defects could cause us to incur significant re-engineering costs, divert the attention of our engineering personnel from product development efforts and significantly affect our customer relations and business reputation. If we deliver solar cells or solar panels with errors or defects, or if there is a perception that our solar cells or solar panels contain errors or defects, our credibility and the market acceptance and sales of our solar power products could be harmed. Similarly, if PowerLight delivers solar cells or panels with errors or defects, including cells or panels of third party manufacturers, or if there is a perception that such solar cells or solar panels contain errors or defects, PowerLight’s credibility and the market acceptance and sales of its solar power systems could be harmed.

The possibility of future product failures could cause us to incur substantial expense to repair or replace defective products. Furthermore, widespread product failures may damage our market reputation and reduce our market share and cause sales to decline. We have agreed to indemnify our customers and our distributors in some circumstances against liability from defects in our solar cells. A successful indemnification claim against us could require us to make significant damage payments, which would negatively affect our financial results.

Since our SunPower solar panels cannot be tested for the duration of our standard 25-year warranty period, we may be subject to unexpected warranty expense; if SunPower or PowerLight is subject to warranty and product liability claims, such claims could adversely affect our business and results of operations.

SunPower’s current standard product warranty for our solar panels includes a 10-year warranty period for defects in material and workmanship and a 25-year warranty period for declines in power performance as well as a one-year warranty on the functionality of our solar cells. We believe our warranty periods are consistent with industry practice. Due to the long warranty period and our proprietary technology, we bear the risk of extensive warranty claims long after we have shipped product and recognized revenue. SunPower has sold solar cells only since late 2004. Any increase in the defect rate of our products would cause us to increase the amount of warranty reserves and have a corresponding negative impact on our results. Although we conduct accelerated testing of our solar cells and have several years of experience with our all back contact cell architecture, our solar panels have not and cannot be tested in an environment simulating the 25-year warranty period. In the second quarter of 2006, we increased our estimated warranty provision rate, which increased our warranty reserve by approximately $1.0 million. This change in estimate was based on results of recent testing that simulates adverse environmental conditions and potential failure rates our solar panels could experience during their 25-year warranty period. As a result of the foregoing, we may be subject to unexpected warranty expense, which in turn would harm our financial results.

Like other retailers, distributors and manufacturers of products that are used by consumers, we face an inherent risk of exposure to product liability claims in the event that the use of the solar power products into which our solar cells and solar panels are incorporated results in injury. Our PowerLight business may be subject to warranty and product liability claims in the event that its solar power systems fail to perform as expected or if

 

28


Table of Contents

a failure of its solar power systems results, or is alleged to result, in bodily injury, property damage or other damages. Since our solar power products are electricity producing devices, it is possible that our products could result in injury, whether by product malfunctions, defects, improper installation or other causes. In addition, since we only began selling our solar cells and solar panels in late 2004 and the products we are developing incorporate new technologies and use new installation methods, we cannot predict whether or not product liability claims will be brought against us in the future or the effect of any resulting negative publicity on our business. Moreover, we may not have adequate resources in the event of a successful claim against us. We have evaluated the potential risks we face and believe that we have appropriate levels of insurance for product liability claims. We rely on our general liability insurance to cover product liability claims and have not obtained separate product liability insurance. However, a successful warranty or product liability claim against us that is not covered by insurance or is in excess of our available insurance limits could require us to make significant payments of damages. In addition, quality issues can have various other ramifications, including delays in the recognition of revenue, loss of revenue, loss of future sales opportunities, increased costs associated with repairing or replacing products, and a negative impact on our goodwill and reputation, which could also adversely affect our business and operating results. Our PowerLight business’ exposure to warranty and product liability claims is expected to increase significantly in connection with its planned expansion into the new home development market.

Warranty and product liability claims may result from defects or quality issues in certain third party technology and components that our PowerLight business incorporates into its solar power systems, particularly solar cells and panels, over which it has no control. While its agreements with its suppliers generally include warranties, such provisions may not fully compensate us for any loss associated with third-party claims caused by defects or quality issues in such products. In the event we seek recourse through warranties, we will also be dependent on the creditworthiness and continued existence of the suppliers to our PowerLight business.

Our PowerLight business’ current standard warranty differs by geography and end-customer application and includes either a one-, two- or five-year comprehensive parts and workmanship warranty, after which the customer may typically extend the period covered by its warranty for an additional fee. Due to the warranty period, our PowerLight business bears the risk of extensive warranty claims long after it has completed a project and recognized revenues. Future product failures could cause our PowerLight business to incur substantial expenses to repair or replace defective products. While our PowerLight business generally passes through manufacturer warranties it receives from its suppliers to its customers, it is responsible for repairing or replacing any defective parts during its warranty period, often including those covered by manufacturers warranties. If the manufacturer disputes or otherwise fails to honor its warranty obligations, our PowerLight business may be required to incur substantial costs before it is compensated, if at all, by the manufacturer. Furthermore, the PowerLight business’ warranties may exceed the period of any warranties from the PowerLight business’ suppliers covering components included in its systems, such as inverters.

In February 2004, one of PowerLight’s major panel suppliers at the time, AstroPower, Inc., filed for bankruptcy. PowerLight had installed systems incorporating over 30,000 AstroPower panels, and approximately 27,000 of these panels incorporated into systems that are still under warranty by it. The majority of these warranties expire by 2008, and all expire by 2010. While PowerLight has not experienced a significant number of warranty or other claims related to installed AstroPower panels, it may in the future incur significant unreimbursable expenses in connection with the repair or replacement of these panels, which could have a material adverse effect on our business and results of operations. In addition, another major supplier of solar panels notified PowerLight of a product defect that may affect a substantial number of panels installed by PowerLight during the period 2002 through September 2006. If the supplier does not perform its contractual obligations to remediate the defective panels, we will be exposed to those costs it would incur under the warranty with its customers.

 

29


Table of Contents

SunPower incurred losses from inception through 2005 and SunPower and PowerLight may not be able to generate sufficient revenue in the future to achieve or sustain profitability.

SunPower incurred net losses from inception through 2005 and at December 31, 2006 we had an accumulated deficit of approximately $32.0 million. To maintain our profitability, SunPower and PowerLight will need to generate and sustain higher revenue while maintaining reasonable cost and expense levels. We do not know if our revenue will grow, or if it will grow sufficiently to outpace our expenses, which we expect to increase as we expand our manufacturing capacity. We may not be able to sustain or increase profitability on a quarterly or an annual basis. If we do not sustain profitability or otherwise meet the expectations of securities analysts or investors, the market price of our common stock will likely decline.

SunPower and PowerLight will continue to be dependent on a limited number of third-party suppliers for key components for our products, which could prevent us from delivering our products to our customers within required timeframes, which could result in installation delays, cancellations, liquidated damages and loss of market share.

In addition to SunPower’s reliance on a small number of suppliers for its solar cells and panels, PowerLight relies on third-party suppliers for key components for its solar power systems, such as inverters that convert the direct current electricity generated by solar panels into alternating current electricity usable by the customer. For the year ended December 31, 2006, one supplier accounted for most of PowerLight’s inverter purchases for domestic projects, one supplier accounted for most of its inverter purchases for European projects and one supplier accounted for all of the inverter purchases for its Asia projects. In addition, one vendor supplies all of the foam required to manufacture PowerLight’s PowerGuard ® roof system.

If SunPower or PowerLight fails to develop or maintain our relationships with our limited suppliers, we may be unable to manufacture our products or our products may be available only at a higher cost or after a long delay, which could prevent us from delivering our products to our customers within required timeframes and we may experience order cancellation and loss of market share. To the extent the processes that our suppliers use to manufacture components are proprietary, we may be unable to obtain comparable components from alternative suppliers. The failure of a supplier to supply components in a timely manner, or to supply components that meet our quality, quantity and cost requirements, could impair our ability to manufacture our products or decrease their costs. If we cannot obtain substitute materials on a timely basis or on acceptable terms, we could be prevented from delivering our products to our customers within required timeframes, which could result in installation delays, cancellations, liquidated damages and loss of market share, any of which could have a material adverse effect on our business and results of operations.

Any firm commitment supply agreements with solar panel manufacturers could result in insufficient or excess inventory in the PowerLight business.

PowerLight recently attempted to address the solar cell and panel shortage by negotiating certain multi-year contractual commitments from suppliers. Under such agreements, it is generally required to purchase a specified number of solar cells or panels at fixed prices. Our PowerLight business’ failure to satisfy its purchase obligations may result in substantial liquidated or other damages that we will be required to pay these suppliers. PowerLight did not obtain, and we do not intend to obtain, contracts or commitments from customers for products incorporating solar panels prior to the negotiation of such firm commitment contracts. Instead, PowerLight relies on its long-term internal forecasts to determine the timing of its production schedules and the volume and mix of its products to be manufactured, including the estimated number of solar panels needed. The level and timing of orders placed by customers may vary for many reasons. As a result, at any particular time, we may have insufficient or excess inventory, and incur liquidated or other damages with suppliers to our PowerLight business for failure to satisfy its purchase obligations, any of which could have a material adverse effect on our business and results of operations. In addition, if we enter into long-term solar panel purchase commitments, due to the rapid pace of technological advancements in the solar power industry, we increase our risk of obsolescence of products that we have agreed to purchase over extended periods.

 

30


Table of Contents

Acquisitions of other companies or investments in joint ventures with other companies by SunPower or PowerLight could adversely affect our operating results, dilute our stockholders’ equity, or cause us to incur additional debt or assume contingent liabilities.

To increase our business and maintain our competitive position, we may acquire other companies or engage in joint ventures in the future. Acquisitions and joint ventures involve a number of risks that could harm our business and result in the acquired business or joint venture not performing as expected, including:

 

   

insufficient experience with technologies and markets in which the acquired business is involved, which may be necessary to successfully operate and integrate the business;

 

   

problems integrating the acquired operations, personnel, technologies or products with the existing business and products;

 

   

diversion of management time and attention from the core business to the acquired business or joint venture;

 

   

potential failure to retain key technical, management, sales and other personnel of the acquired business or joint venture;

 

   

difficulties in retaining relationships with suppliers and customers of the acquired business, particularly where such customers or suppliers compete with us; and

 

   

subsequent impairment of the acquired assets, including intangible assets.

We may decide that it is in its best interests to enter into acquisitions or joint ventures that are dilutive to earnings per share or that negatively impact margins as a whole. In addition, acquisitions or joint ventures could require investment of significant financial resources and require us to obtain additional equity financing, which may dilute our stockholders’ equity, or require us to incur additional indebtedness.

To the extent that we invest in upstream suppliers or downstream channel capabilities, we may experience competition or channel conflict with certain of our existing and potential suppliers and customers. Specifically, existing and potential suppliers and customers may perceive that we are competing directly with them by virtue of such investments and may decide to reduce or eliminate their supply volume to us or order volume from us. In particular, any supply reductions from our polysilicon, ingot or wafer suppliers could materially reduce manufacturing volume.

SunPower and PowerLight have significant international activities and customers, and plan to continue these efforts, which subject us to additional business risks, including logistical complexity, political instability and currency fluctuations.

For fiscal year ended December 31, 2006, a substantial portion of our sales were made to customers outside of the United States. SunPower currently has four solar cell production lines in operation, which are located at our manufacturing facility in the Philippines. In addition, a majority of our assembly functions have historically been conducted by a third-party subcontractor in China. PowerLight has historically had significant sales in Germany, Portugal and Spain. Risks we face in conducting business internationally include:

 

   

multiple, conflicting and changing laws and regulations, export and import restrictions, employment laws, regulatory requirements and other government approvals, permits and licenses;

 

   

difficulties and costs in staffing and managing foreign operations such as our manufacturing facility in the Philippines, as well as cultural differences;

 

   

difficulties and costs in recruiting and retaining individuals skilled in international business operations;

 

   

increased costs associated with maintaining international marketing efforts;

 

   

potentially adverse tax consequences;

 

31


Table of Contents
   

inadequate local infrastructure;

 

   

financial risks, such as longer sales and payment cycles and greater difficulty collecting accounts receivable; and

 

   

political and economic instability, including wars, acts of terrorism, political unrest, boycotts, curtailments of trade and other business restrictions.

Specifically, SunPower faces risks associated with political and economic instability and civil unrest in the Philippines. In addition, in the Asia/Pacific region generally, we face risks associated with a recurrence of SARS, tensions between countries in that region, such as political tensions between China and Taiwan, the ongoing discussions with North Korea regarding its nuclear weapons program, potentially reduced protection for intellectual property rights, government-fixed foreign exchange rates, relatively uncertain legal systems and developing telecommunications infrastructures. In addition, some countries in this region, such as China, have adopted laws, regulations and policies which impose additional restrictions on the ability of foreign companies to conduct business in that country or otherwise place them at a competitive disadvantage in relation to domestic companies.

In addition, although base wages are lower in the Philippines than in the United States, wages for SunPower’s employees in the Philippines are increasing, which could result in increased costs to employ our manufacturing engineers. As of December 31, 2006, approximately 94% of SunPower’s employees were located in the Philippines. We also are faced with competition in the Philippines for employees, and we expect this competition to increase as additional solar companies enter the market and expand their operations. In particular, there may be limited availability of qualified manufacturing engineers. We have benefited from an excess of supply over demand for college graduates in the field of engineering in the Philippines. If this favorable imbalance changes due to increased competition, it could affect the availability or cost of qualified employees, who are critical to our performance. This could increase our costs and turnover rates.

A significant portion of the operations for SunPower and PowerLight occur outside the United States. Currency fluctuations in the Euro, Philippine peso or the South Korean won relative to the U.S. dollar could decrease revenue or increase its expenses.

During the twelve months ended December 31, 2006, approximately 68% of SunPower’s total revenue, including sales to PowerLight, was generated outside the United States. We presently have currency exposure arising from sales, capital equipment purchases, prepayments and customer advances denominated in foreign currencies. A majority of SunPower’s total revenue is denominated in Euros, including fixed price agreements with Conergy and Solon, and a significant portion is denominated in U.S. dollars, while a portion of SunPower’s costs are incurred and paid in Euros and a smaller portion of SunPower’s expenses are paid in Philippine pesos and Japanese yen. In addition, SunPower’s prepayment to Wacker-Chemie AG, a polysilicon supplier to SunPower, and SunPower’s customer advances from Solon are denominated in Euros. For the nine months ended September 30, 2006 and in 2005 approximately 34% and 19%, respectively, of PowerLight’s total revenue was generated outside the U.S. PowerLight presently has currency exposure arising from both sales and purchases denominated in foreign currencies. A large portion of PowerLight’s total revenue is denominated in Euros, and a significant portion of its costs are incurred and paid in Euros.

SunPower and PowerLight are exposed to the risk of a decrease in the value of the Euro relative to the U.S. dollar, which would decrease our total revenue. Changes in exchange rates between foreign currencies and the U.S. dollar may adversely affect our operating margins. For example, if these foreign currencies appreciate against the U.S. dollar, it will make it more expensive in terms of U.S. dollars to purchase inventory or pay expenses with foreign currencies. In addition, currency devaluation can result in a loss to us if we hold deposits of that currency as well as make our products, which are usually purchased with U.S. dollars, relatively more expensive than products manufactured locally. An increase in the value of the U.S. dollar relative to foreign currencies could make our solar cells more expensive for international customers, thus potentially leading to a

 

32


Table of Contents

reduction in our sales and profitability. Furthermore, many of our competitors will be foreign companies that could benefit from such a currency fluctuation, making it more difficult for us to compete with those companies. We currently conduct hedging activities, which involve the use of currency forward contracts. We cannot predict the impact of future exchange rate fluctuations on our business and operating results. In the past, we have experienced an adverse impact on our total revenue and profitability as a result of foreign currency fluctuations.

SunPower’s current tax holidays in the Philippines will expire within the next several years.

SunPower currently benefits from income tax holiday incentives in the Philippines pursuant to our Philippine subsidiary’s registrations with the Board of Investments and Philippine Economic Zone Authority, which provide that we pay no income tax in the Philippines for four years pursuant to our Board of Investments non-pioneer status and Philippine Economic Zone Authority registrations, and six years pursuant to our Board of Investments pioneer status registration. Our current income tax holidays expire in 2010, and we intend to apply for extensions. However, these tax holidays may or may not be extended. We believe that as our Philippine tax holidays expire, (a) gross income attributable to activities covered by our Philippine Economic Zone Authority registrations will be taxed at a 5% preferential rate, and (b) our Philippine net income attributable to all other activities will be taxed at the statutory Philippine corporate income tax rate of 32%. As of yet no tax benefit has been realized from the income tax holiday due to operating losses in the Philippines.

Neither SunPower nor PowerLight may be able to increase or sustain our recent growth rate, and we may not be able to manage our future growth effectively.

Neither SunPower nor PowerLight may be able to continue to expand our business or manage future growth. Our recent expansion has placed, and our planned expansion and any other future expansion will continue to place, a significant strain on our management, personnel, systems and resources. We plan to purchase additional equipment to significantly expand our manufacturing capacity and to hire additional employees to support an increase in manufacturing, research and development and our sales and marketing efforts. To successfully manage our growth and handle the responsibilities of being a public company, we believe we must effectively:

 

   

hire, train, integrate and manage additional qualified engineers for research and development activities, sales and marketing personnel, and financial and information technology personnel;

 

   

retain key management and augment our management team, particularly if we lose key members;

 

   

continue to enhance our customer resource management and manufacturing management systems;

 

   

implement and improve additional and existing administrative, financial and operations systems, procedures and controls, including the need to integrate our financial internal control systems in our Philippines facility with those of our San Jose, California headquarters;

 

   

expand and upgrade our technological capabilities; and

 

   

manage multiple relationships with our customers, suppliers and other third parties.

PowerLight experienced significant revenue growth due primarily to the development and market acceptance of its PowerGuard ® roof system, the acquisition and introduction of its PowerTracker ® ground and elevated parking systems, its development of other technologies and increasing global interest and demand for renewable energy sources, including solar power generation. As a result, PowerLight increased its revenues in a relatively short period of time. Its annual revenue increased from $50.9 million in 2003 to $87.6 million in 2004 to $107.8 million in 2005 and to $140.1 million for the nine months ended September 30, 2006, respectively. Our PowerLight business may not experience similar revenue growth in future periods. Accordingly, you should not rely on the results of any prior quarterly or annual period as an indication of the future operating performance of our PowerLight business.

 

33


Table of Contents

We may encounter difficulties in effectively managing the budgeting, forecasting and other process control issues presented by rapid growth. If we are unable to manage our growth effectively, we may not be able to take advantage of market opportunities, develop new solar cells and other products, satisfy customer requirements, execute our business plan or respond to competitive pressures.

SunPower and PowerLight had approximately 1,759 full-time employees as of January 1, 2007, on a pro forma combined basis, and we anticipate that we will need to hire a significant number of highly skilled technical, manufacturing, sales, marketing, administrative and accounting personnel. The competition for qualified personnel is intense in our industry. We may not be successful in attracting and retaining sufficient numbers of qualified personnel to support our anticipated growth. Since we are a public company, may have more difficulty than our private competitors in attracting personnel because of the perception that the stock option component of our compensation package may not be as valuable.

The success of our PowerLight business will depend in part on the continuing formation of such companies and the potential revenue source they represent. In deciding whether to form and invest in such companies, potential investors weigh a variety of considerations, including their projected return on investment. Such projections are based on current and proposed federal, state and local laws, particularly tax legislation. Changes to these laws, including amendments to existing tax laws or the introduction of new tax laws, tax court rulings as well as changes in administrative guidelines, ordinances and similar rules and regulations could result in different tax assessments and may adversely affect an investor’s projected return on investment, which could have a material adverse effect on our business and results of operations.

The steps SunPower has taken to increase the efficiency of our polysilicon utilization are unproven at volume production levels and may not enable us to realize the cost reductions we anticipate.

Given the polysilicon shortage, we believe the efficient use of polysilicon will be critical to SunPower’s ability to reduce our manufacturing costs. We continue to implement several measures to increase the efficient use of polysilicon in our manufacturing process. For example, we are developing processes to utilize thinner wafers which require less polysilicon and improved wafer-slicing technology to reduce the amount of material lost while slicing wafers, otherwise known as kerf loss. Although we have implemented some production on thinner wafers and anticipate further reductions in wafer thickness, these methods may have unforeseen negative consequences on our yields or our solar cell efficiency or reliability once they are put into large-scale commercial production or they may not enable us to realize the cost reductions we hope to achieve.

PowerLight recognized revenue on a “percent completion” basis and upon the achievement of contractual milestones. We intend to recognize revenue from projects our PowerLight business on a similar basis, and any delay or cancellation of a project could adversely affect our business.

PowerLight recognized revenue on a “percent completion” basis and, as a result, the revenue from this business was driven by its performance of its contractual obligations, which is generally driven by timelines for the installation of its solar power systems at customer sites. We will recognize revenue from projects of the PowerLight business on a similar basis. As a consequence of the Merger, we will delay the recognition of revenue from sales of cells and panels to PowerLight until PowerLight recognizes revenue. This could result in unpredictability of revenue and, in the near term, a revenue decrease. As with any project-related business, there is the potential for delays within any particular customer project. Variation of project timelines and estimates may impact our ability to recognize revenue in a particular period. In addition, certain customer contracts may include payment milestones due at specified points during a project. Because our PowerLight business usually must invest substantial time and incur significant expense in advance of achieving milestones and the receipt of payment, failure to achieve such milestones could adversely affect our business and results of operations.

 

34


Table of Contents

Our PowerLight business’ sales cycles can be longer than the sales cycle for our solar cells and panels and may require significant upfront investment which may not ultimately result in signing of a sales contract and could materially adversely affect our business and results of operations.

Our PowerLight business’ sales cycles, which measure the time between its first contact with a customer and the signing of a sales contract for a particular project, vary substantially and average approximately eight months. Sales cycles for the PowerLight business’ systems are lengthy for a number of reasons, including:

 

   

its customers often delay purchasing decisions until their eligibility for an installation rebate is confirmed, which generally takes several months;

 

   

the long time required to secure adequate financing for system purchases on terms acceptable to customers; and

 

   

the customer’s review and approval processes for system purchases are lengthy and time consuming.

As a result of these long sales cycles, our PowerLight business must make significant upfront investments of resources in advance of the signing of sales contracts and the receipt of any revenues, most of which are not recognized for several additional months following contract signing. Accordingly, our PowerLight business must focus its limited resources on sales opportunities that it believes it can secure. Its inability to enter into sales contracts with potential customers after it makes such an investment could have a material adverse effect on our business and results of operations.

SunPower depends on a combination of our own wafer-slicing operations and those of other vendors for the wafer-slicing stage of our manufacturing, and any technical problems, breakdowns, delays or cost increases could significantly delay our manufacturing operations, decrease our output and increase our costs.

SunPower has historically depended on the wafer-slicing operations of third-party vendors to slice ingots into wafers. We have established our own wafer-slicing operations, and in 2006, we sliced approximately 60% of our wafers. If our third-party vendors increase their prices or decrease or discontinue their shipments to us, as a result of equipment malfunctions, competing purchasers or otherwise, and we are unable to obtain substitute wafer-slicing from another vendor on acceptable terms, or increase our own wafer-slicing operations on a timely basis, our sales will decrease, our costs may increase or our business will otherwise be harmed.

SunPower obtains capital equipment used in our manufacturing process from sole suppliers and if this equipment is damaged or otherwise unavailable, our ability to deliver products on time will suffer, which in turn could result in order cancellations and loss of revenue.

Some of the capital equipment used in the manufacture of SunPower’s solar power products and in our wafer-slicing operations has been developed and made specifically for us, is not readily available from multiple vendors and would be difficult to repair or replace if it were to become damaged or stop working. In addition, we currently obtain the equipment for many of our manufacturing processes from sole suppliers and we obtain our wafer-slicing equipment from one supplier. If any of these suppliers were to experience financial difficulties or go out of business, or if there were any damage to or a breakdown of our manufacturing or wafer-slicing equipment at a time when we are manufacturing commercial quantities of our products, our business would suffer. In addition, a supplier’s failure to supply this equipment in a timely manner, with adequate quality and on terms acceptable to us, could delay our capacity expansion of our manufacturing facility and otherwise disrupt our production schedule or increase our costs of production.

SunPower and PowerLight generally do not have long-term agreements with our customers and accordingly could lose customers without warning.

SunPower’s solar cells, solar panels and imaging detector products are generally not sold pursuant to long-term agreements with customers, but instead are sold on a purchase order basis. PowerLight typically contracts to

 

35


Table of Contents

perform large projects with no assurance of repeat business from the same customers in the future. Although we believe that cancellations on our purchase orders to date have been insignificant, our customers may cancel or reschedule purchase orders with us on relatively short notice. Cancellations or rescheduling of customer orders could result in the delay or loss of anticipated sales without allowing us sufficient time to reduce, or delay the incurrence of, our corresponding inventory and operating expenses. In addition, changes in forecasts or the timing of orders from these or other customers expose us to the risks of inventory shortages or excess inventory. This, in addition to the completion and non-repetition of large PowerLight projects, in turn could cause our operating results to fluctuate.

Sales contracts for PowerLight’s products with increasing frequency have begun to include provisions regarding liquidated damages for installation delays, electricity generation or other solar power system performance guarantees and conditional payments. If they continue, such provisions will put us at economic risk for future uncertain events.

Some of PowerLight’s larger customers require that it pay substantial liquidated damages for each day or other period its solar installation is not completed beyond an agreed target date. This is particularly true in Europe, where long-term, fixed feed-in tariffs available to investors are typically set during the year of project completion, but the fixed amount declines over time for projects completed in subsequent years. In addition, investors often require that the solar power system generate specified levels of electricity in order to maintain their investment returns, allocating risk and financial penalties to PowerLight if those levels are not achieved. Furthermore, its customers often require protections in the form of conditional payments, payment retentions or holdbacks, and similar arrangements that condition its future payments on performance. Delays in solar panel or other supply shipments, other construction delays, unexpected performance problems in electricity generation or other events could cause our PowerLight business to fail to meet these performance criteria, resulting in unanticipated revenue and earnings losses and financial penalties. If the trend for requiring such provisions continues, our PowerLight business would be subject to the same risks as PowerLight prior to the Merger, which could have a material adverse effect on our business and results of operations.

PowerLight prior to the Merger usually acted as the general contractor for its customers in connection with the installations of its solar power systems and was subject to risks associated with cost overruns, delays and other contingencies. We intend to operate the PowerLight business in the same manner, and will be subject to the same risks.

PowerLight prior to the Merger acted as the general contractor for its customers in connection with the installation of its solar power systems. All essential costs were estimated at the time of entering into the sales contract for a particular project, and these were reflected in the overall price that it charges its customers for the project. These cost estimates were preliminary and may or may not be covered by contracts between PowerLight or the other project developers, subcontractors, suppliers and other parties to the project. In addition, PowerLight required qualified, licensed subcontractors to install most of its systems. Shortages of such skilled labor could significantly delay a project or otherwise increase PowerLight’s costs. Should miscalculations in planning a project or defective or late execution occur, PowerLight may not have achieved its expected margins or cover its costs. In particular, construction delays, including those caused by inclement weather, failure to timely receive necessary approvals and permits, or delays in obtaining necessary solar panels, inverters or other materials. Because we intend to operate our PowerLight business in the same manner, our PowerLight business could be subject to the same risks, and such risks could have a material adverse effect on our business and results of operations.

Our PowerLight business could be adversely affected by seasonal trends and construction cycles.

Our PowerLight business is subject to significant industry-specific seasonal fluctuations. Its sales have historically reflected these seasonal trends with the largest percentage of total revenues being realized during the last two calendar quarters. Low seasonal demand normally results in reduced shipments and revenues in the first

 

36


Table of Contents

two calendar quarters. There are various reasons for this seasonality, mostly related to economic incentives and weather patterns. For example, in European countries with feed-in tariffs, the construction of solar power systems is concentrated during the second half of the calendar year, largely due to the annual reduction of the applicable minimum feed-in tariff and the fact that the coldest winter months are January through March. In the United States, customers will sometimes make purchasing decisions towards the end of the year in order to take advantage of tax credits or for other budgetary reasons.

In addition, to the extent the PowerLight business is successful in implementing its strategy to enter the new home development market, it expects the seasonality of its business and financial results to become more pronounced as sales in this market are often tied to construction market demands which tend to follow national trends in construction, including declining sales during cold weather months.

The expansion of our PowerLight business into the residential market may increase its exposure to certain risks, including class action product liability claims.

PowerLight has expanded into the residential market by beginning to sell its systems to large production homebuilders. It currently expects this new growth strategy to initially focus on new home development projects in excess or 50 homes, though it considers projects below this amount. As part of this strategy, PowerLight developed SunTile® , a product that integrates a solar panel into a roof tile. To date PowerLight has focused on large-scale commercial applications and has almost no experience serving the residential market.

Our PowerLight business’ new residential products and services may not gain market acceptance and it may not otherwise be successful in entering the residential market, which would limit its growth and adversely affect our operating results. Furthermore, the residential construction market has peculiar characteristics that may increase its exposure to certain risks it currently faces or expose it to new risks. These risks include increased seasonality, sensitivity to interest rates and other macroeconomic conditions, as well as enhanced legal exposure. In particular, new home developments often result in class action litigation when one or more homes within a development experiences construction problems. Unlike our PowerLight business’ core activities, where it typically acts as general contractor, it will be generally acting as subcontractor to homebuilders overseeing the development projects. In many instances subcontractors may be held liable for work of the homebuilder or other subcontractors. In addition, homebuilders often require onerous indemnification obligations that effectively allocate most of the potential liability from homeowner or class action lawsuits to subcontractors, including our PowerLight business. Insurance policies for its residential work have significant limitations on coverage that may render such policies inapplicable to these lawsuits. If our PowerLight business is not successful in entering the new residential construction market, or if as a result of the litigation and indemnification risks associated with such market, our PowerLight business incurs significant costs, our business and results of operations could be materially adversely affected.

If SunPower and PowerLight fail to successfully develop and introduce new products and services, we will not be able to compete effectively, and our ability to generate revenues will suffer; technological changes in the solar power industry could render SunPower’s and PowerLight’s solar power products uncompetitive or obsolete, which could reduce our market share and cause our sales to decline.

As we introduce new or enhanced products or integrate PowerLight’s or other new technology into our products, we will face risks relating to such transitions including, among other things, technical challenges, disruption in customers’ ordering patterns, insufficient supplies of new products to meet customers’ demand, possible product and technology defects arising from the integration of new technology and a potentially different sales and support environment relating to any new technology. Our failure to manage the transition to newer products or the integration of newer technology into our products could adversely affect our business’ operating results and financial results.

The solar power market is characterized by continually changing technology requiring improved features, such as increased efficiency and higher power output and improved aesthetics. This will require us to

 

37


Table of Contents

continuously develop new solar power products and enhancements for existing solar power products to keep pace with evolving industry standards and changing customer requirements. Technologies developed by others, including thin film solar panels, concentrating solar cells or other solar technologies, may prove more advantageous than ours for the commercialization of solar power products and may render our technology obsolete. Our failure to further refine our technology and develop and introduce new solar power products could cause our products to become uncompetitive or obsolete, which could reduce our market share and cause our sales to decline. SunPower’s research and development expense was $9.7 million in 2006 and $6.5 million in 2005. PowerLight’s net research and development expense after deduction for government funding was $0.5 million for the nine months ended September 30, 2006 and $0.5 million in 2005. PowerLight’s total research and development expense before government funding was $1.6 million for the nine months ended September 30, 2006 and $2.1 million in 2005. We will need to invest significant financial resources in research and development to maintain our market position, keep pace with technological advances in the solar power industry and effectively compete in the future.

Evaluating SunPower’s business and future prospects may be difficult due to our limited history in producing and shipping solar cells and solar panels in commercial volumes.

There is limited historical information available about SunPower upon which you can base your evaluation of our business and prospects. Although we began to develop and commercialize high-efficiency solar cell technology for use in solar concentrators in 1988 and began shipping product from our pilot manufacturing facility in 2003, we shipped our first commercial A-300 solar cells from our Philippines manufacturing facility in late 2004. Relative to the entire solar industry, we have shipped only a limited number of solar cells and solar panels and have recognized limited revenue. Our future success will require us to continue to scale our Philippines facilities significantly beyond their current capacity. In addition, our business model, technology and ability to achieve satisfactory manufacturing yields at higher volumes are unproven at significant scale. As a result, you should consider our business and prospects in light of the risks, expenses and challenges that we will face as an early-stage company seeking to develop and manufacture new products in a rapidly growing market.

SunPower and PowerLight’s reliance on government programs to partially fund our research and development programs could impair our ability to commercialize our solar power products and services and increase our research and development expenses.

We intend to continue our policy of selectively pursuing contract research, product development and market development programs funded by various agencies of the federal and state governments to complement and enhance our own resources. Funding from government grants is recorded as an offset to our research and development expense. For the nine months ended September 30, 2006 funding from government grants offset approximately 65% of PowerLight’s research and development expense and for the year ended December 31, 2006, government grants offset SunPower’s research and development expense by approximately 8%.

These government agencies may not continue their commitment to programs relevant to our development projects. Moreover, we may not be able to compete successfully to obtain funding through these or other programs. A reduction or discontinuance of these programs or of our participation in these programs would materially increase our research and development expenses, which would adversely affect our profitability and could impair our ability to develop our solar power products and services. In addition, contracts involving government agencies may be terminated or modified at the convenience of the agency. Many of our PowerLight business’ government contracts also contain royalty provisions that require it to pay certain amounts based on specified formulas. Government contracts are subject to audit and governmental agencies may dispute its royalty calculations. Any such dispute could result in fines, increased royalty payments, cancellation of the agreement or other penalties, which could have material adverse affect on our business and results of operations.

Our PowerLight business’ government-sponsored research contracts require that it provide regular written technical updates on a monthly, quarterly or annual basis, and, at the conclusion of the research contract, a final

 

38


Table of Contents

report on the results of its technical research. Because these reports are generally available to the public, third parties may obtain some aspects of its sensitive confidential information. Moreover, the failure to provide accurate or complete reports may provide the government with rights to any intellectual property arising from the related research.

Funding from government contracts also may limit when and how we can deploy our products and services developed under those contracts. In addition, technology and intellectual property that we develop with government funding provides the government with “march-in” rights. March-in rights refer to the right of the government or a government agency to require us to grant a license to the developed technology or products to a responsible applicant or, if it refuses, the government may grant the license itself. The government can exercise its march-in rights if it determines that action is necessary because we fail to achieve practical application of the technology or because action is necessary to alleviate health or safety needs, to meet requirements of federal regulations or to give the United States industry preference.

Because the markets in which we compete are highly competitive and many of our competitors have greater resources than SunPower and PowerLight, we may not be able to compete successfully and we may lose or be unable to gain market share.

SunPower’s solar products compete with a large number of competitors in the solar power market, including BP Solar International Inc., Evergreen Solar, Inc., Mitsubishi Electric Corporation, Q-Cells AG, Sanyo Corporation, Sharp Corporation, First Solar, SolarWorld AG and Suntech Power Holdings Co., Ltd. In addition, universities, research institutions and other companies have brought to market alternative technologies such as thin films and concentrators, which may compete with our technology in certain applications. We expect to face increased competition in the future. Further, many of our competitors are developing and are currently producing products based on new solar power technologies that may ultimately have costs similar to, or lower than, our projected costs.

PowerLight’s solar power products and services compete against other power generation sources including conventional fossil fuels supplied by utilities, other alternative energy sources such as wind, biomass, CSP and emerging distributed generation technologies such as micro-turbines, sterling engines and fuel cells. In the large-scale on-grid solar power systems market, PowerLight will face direct competition from a number of companies that manufacture, distribute, or install solar power systems. Many of these companies sell PowerLight’s products as well as their own or those of other manufacturers. Our PowerLight business’ primary competitors in the United States include Arizona Public Service Company, BP Solar International, Inc., a subsidiary of BP p.l.c., Conergy Inc., Dome-Tech Group, Eastwood Energy, EI Solutions, Inc., GE Energy, a subsidiary of General Electric Corporation, Global Solar Energy, Inc., a subsidiary of Solon, Power-Fab, Schott Solar, Inc., Solar Integrated Technologies, Inc., SPG Solar, Inc., Sun Edison LLC, SunTechnics Installation & Services, Inc., Thompson Technology Industries, Inc. and WorldWater & Power Corporation. Our PowerLight business’ primary competitors in Europe include BP Solar, Conergy (through its subsidiaries AET Alternitive Energie Technik GmbH, SunTechnics Solartechnik GmbH and voltwerk AG), PV-Systemtechnik Gbr, SAG Solarstrom AG, Solon AG and Taufer Solar GmbH. Additionally, our PowerLight business will occasionally compete with distributed generation equipment suppliers such as Caterpillar, Inc. and Cummins Inc. Other existing and potential competitors in the solar power market include universities and research institutions. We also expect that future competition will include new entrants to the solar power market offering new technological solutions. As we enter new markets and pursues additional applications for our PowerLight business’ products and services, we expect to face increased competition, which may result in price reductions, reduced margins or loss of market share.

Competition is intense, and many of our competitors have significantly greater access to financial, technical, manufacturing, marketing, management and other resources than we do. Many also have greater name recognition, a more established distribution network and a larger installed base of customers. In addition, many of our competitors have well-established relationships with our current and potential suppliers, resellers and their

 

39


Table of Contents

customers and have extensive knowledge of our target markets. As a result, these competitors may be able to devote greater resources to the research, development, promotion and sale of their products and respond more quickly to evolving industry standards and changing customer requirements than we will be able to. Consolidation or strategic alliances among such competitors may strengthen these advantages and may provide them greater access to customers or new technologies. We may also face competition from some of PowerLight’s resellers, who may develop products internally that compete with our PowerLight business’ product and service offerings, or who may enter into strategic relationships with or acquire other existing solar power system providers. To the extent that government funding for research and development grants, customer tax rebates and other programs that promote the use of solar and other renewable forms of energy are limited, we will compete for such funds, both directly and indirectly, with other renewable energy providers and their customers.

If we cannot compete successfully in the solar power industry, our operating results and financial condition will be adversely affected. Furthermore, we expect competition in PowerLight’s markets to increase, which could result in lower prices or reduced demand for PowerLight’s services and have a material adverse effect on our business and results of operations.

SunPower and PowerLight expect to continue to make significant capital expenditures, particularly in our manufacturing facilities, and if adequate funds are not available or if the covenants in our credit agreements impair our ability to raise capital when needed, our ability to expand our manufacturing capacity and our business will suffer.

We expect to continue to make significant capital expenditures, particularly in our manufacturing facilities, including, for example, through building purchases or long-term leases. SunPower and PowerLight anticipate that our expenses will increase substantially in the foreseeable future as we expand our manufacturing operations, hire additional personnel, pay more or make advance payments for raw material, especially polysilicon, increase our sales and marketing efforts, invest in joint ventures and acquisitions, and continue our research and development efforts with respect to our products and manufacturing technologies. We expect total capital expenditures of approximately $170 million to $190 million in 2007 to build out facilities and infrastructure for additional cell production lines. We expect the first two or three lines to commence production of solar cells during 2007. These expenditures would be greater if we decide to bring capacity on line more rapidly. We believe that our current cash and cash equivalents and funds available under our credit facility will be sufficient to fund our capital and operating expenditures over the next 12 months. However, if our financial results or operating plans change from our current assumptions, we may not have sufficient resources to support our business plan. If our capital resources are insufficient to satisfy our liquidity requirements, we may seek to sell additional equity securities or debt securities or obtain other debt financing. We may also issue equity securities in the future to suppliers of raw materials in order to secure adequate materials to satisfy our production needs. The sale of additional equity securities or convertible debt securities would result in additional dilution to our stockholders. Additional debt would result in increased expenses and could require us to abide by covenants that would restrict our operations. Our credit facilities contain customary covenants and defaults, including, among others, limitations on dividends, incurrence of indebtedness and liens and mergers and acquisitions and may restrict our operating flexibility. If adequate funds are not available or not available on acceptable terms or terms consistent with any new our credit agreement we may enter into, our ability to fund our operations, develop and expand our manufacturing operations and distribution network, maintain our research and development efforts or otherwise respond to competitive pressures would be significantly impaired.

The demand for products requiring significant initial capital expenditures such as SunPower’s and PowerLight’s solar power products and services are affected by general economic conditions.

The United States and international economies have recently experienced a period of slow economic growth. A sustained economic recovery is uncertain. In particular, terrorist acts and similar events, continued turmoil in the Middle East or war in general could contribute to a slowdown of the market demand for products that require significant initial capital expenditures, including demand for solar cells and solar power systems and new residential and commercial buildings. In addition, increases in interest rates may increase financing costs to

 

40


Table of Contents

customers, which in turn may decrease demand for our solar power products. If the economic recovery slows down as a result of the recent economic, political and social turmoil, or if there are further terrorist attacks in the United States or elsewhere, SunPower and/or PowerLight may experience decreases in the demand for our solar power products, which may harm our operating results.

Increases in interest rates may decrease the return on investment for certain customers or investors in projects of PowerLight, which could decrease demand for its products and services and which could have a material adverse effect on our business and results of operations.

PowerLight has benefited from historically low interest rates in recent years, as these rates have made it more attractive for its customers to use debt financing to purchase its solar power systems. Interest rates have been rising and may continue to rise, which will likely increase the cost of financing these systems and may reduce an operating company’s profits and investors’ expected returns on investment. Rising interest rates may also make certain alternative investments more attractive to investors, and therefore lead to a decline in demand for PowerLight’s solar power systems, which could have a material adverse effect on our business and results of operations.

SunPower depends on a third-party subcontractor in China to assemble a majority of our solar cells into solar panels and any failure to obtain sufficient assembly and test capacity could significantly delay our ability to ship our solar panels and damage our customer relationships.

Historically, SunPower has relied on Jiawei, a third-party subcontractor in China, to assemble a majority of our solar cells into solar panels and perform panel testing and to manage test, packaging, warehousing and shipping of our solar panels. SunPower does not have a long-term agreement with Jiawei and we typically obtain services from them based on short-term purchase orders that are generally aligned with timing specified by our customers’ purchase orders and our sales forecasts. If the operations of Jiawei were disrupted or their financial stability impaired, or if they should choose not to devote capacity to our solar panels in a timely manner, our business would suffer as we may be unable to produce finished solar panels on a timely basis. In addition, we supply inventory to Jiawei and we bear the risk of loss, theft or damage to our inventory while it is held in their facilities.

As a result of outsourcing this final step in our production, we face several significant risks, including:

 

   

lack of assembly and testing capacity and higher prices;

 

   

limited control over delivery schedules, quality assurance and control, manufacturing yields and production costs; and

 

   

delays resulting from an inability to move production to an alternate provider.

The ability of our subcontractor to perform assembly and test is limited by their available capacity. We do not have a guaranteed level of production capacity with our subcontractor, and it is difficult to accurately forecast our capacity needs because of the shifting mix between sales of solar cells and solar panels and the timing of expanding our manufacturing capacity. Other customers of Jiawei that are larger and better financed than we are, or that have long-term agreements in place, may induce Jiawei to reallocate capacity to them. Any reallocation could impair our ability to secure the supply of solar panels that we need for our customers. In addition, interruptions to the panel manufacturing processes caused by a natural or man-made disaster could result in partial or complete disruption in supply until we are able to shift manufacturing to another facility. It may not be possible to obtain sufficient capacity or comparable production costs at another facility. Migrating our design methodology to a new third-party subcontractor or to a captive panel assembly facility could involve increased costs, resources and development time. Utilizing additional third party subcontractors could expose us to further risk of losing control over our intellectual property and the quality of our solar panels. Any reduction in the

 

41


Table of Contents

supply of solar panels could impair our revenue by significantly delaying our ability to ship products and potentially damage our relationships with existing customers.

One of PowerLight’s key products, PowerTracker® , was acquired through an assignment and acquisition of the patents associated with the product from a third party individual, and if we are unable to continue to use this product, our business, prospects, operating results and financial condition would be materially harmed.

In September 2002, PowerLight entered into a Technology Assignment and Services Agreement and other ancillary agreements with Jefferson Shingleton and MaxTracker Services, LLC, a New York limited liability company controlled by Mr. Shingleton. These agreements form the basis for its intellectual property rights in its PowerTracker® products. Under such agreements, as later amended, Mr. Shingleton assigned to PowerLight his MaxTracker , MaxRack , MaxRack Ballast and MaxClip products and all related intellectual property rights. Mr. Shingleton is obligated to provide consulting services to PowerLight related to such technology until December 31, 2012 and is required to assign to PowerLight any enhancements he makes to the technology while providing such consulting services. Mr. Shingleton retains a first security interest in the patents and patent applications assigned until the earlier of the expiration of the patents, full payment by PowerLight to Mr. Shingleton of all of the royalty obligations under the Technology Assignment and Services Agreement, or the termination of the Technology Assignment and Services Agreement. In the event of PowerLight’s default under the Technology Assignment and Services Agreement, MaxTracker Services and Mr. Shingleton may terminate the agreements and the related assignments and cause the intellectual rights assigned to it to be returned to Mr. Shingleton or MaxTracker Services, including patents related to PowerTracker® . In addition, upon such termination, PowerLight must grant Mr. Shingleton a perpetual, non-exclusive, royalty-free right and license to use, sell, and otherwise exploit throughout the world any intellectual property MaxTracker Services or Mr. Shingleton developed during the provision of consulting services to PowerLight. Events of default by PowerLight which could enable Mr. Shingleton or Max Tracker Services to terminate the agreements and the related assignments and cause the intellectual rights assigned to it to be returned to Mr. Shingleton or MaxTracker Services include the following:

 

   

if PowerLight files a petition in bankruptcy or equivalent order or petition under the laws of any jurisdiction;

 

   

if a petition in bankruptcy or equivalent order or petition under the laws of any jurisdiction is filed against it which is not dismissed within 60 days of such filing;

 

   

if PowerLight’s assets are assigned for the benefit of creditors;

 

   

if PowerLight voluntarily or involuntarily dissolves (except in connection with the Merger, for which PowerLight received a waiver of this condition);

 

   

if PowerLight fails to pay any amount due under the agreements when due and does not remedy such failure to pay within 10 days of written notice of such failure to pay; or

 

   

if PowerLight defaults in the performance of any of its material obligations under the agreements when required (other than payment of amounts due under the agreements), and such failure is not remedied within 30 days of written notice to it of such default from Mr. Shingleton or MaxTracker Services. However, if such a default can reasonably be cured after the 30-day period, and PowerLight commences cure of such default within 30-day period and diligently prosecutes that cure to completion, such default does not trigger a termination right unless and until PowerLight ceases commercially reasonable efforts to cure such default.

If PowerLight is unable to continue to use and sell PowerTracker ® as a result of the termination of the agreements and the related assignment or any other reason, our business, prospects, operating results and financial condition would be materially harmed.

 

42


Table of Contents

SunPower and PowerLight are dependent on our intellectual property, and we may face intellectual property infringement claims that could be time-consuming and costly to defend and could result in the loss of significant rights.

From time to time, SunPower, PowerLight, our respective customers or third-parties with whom we work may receive letters, including letters from various industry participants, alleging infringement of their patents. Although we are not currently aware of any parties pursuing or intending to pursue infringement claims against us, we cannot assure you that we will not be subject to such claims in the future. Also, because patent applications in the United States and many other jurisdictions are kept confidential for 18 months before they are published, we may be unaware of pending patent applications that relate to our products. Our third-party suppliers may also become subject to infringement claims, which in turn could negatively impact our business. SunPower ceased use of certain licensed technology for which we have not paid royalties since the second quarter of 2004 because our current products do not use the licensed technology. However, the licensor could challenge these actions and litigate against us. Intellectual property litigation is expensive and time-consuming and could divert management’s attention from our business and could have a material adverse effect on our business, operating results or financial condition. If there is a successful claim of infringement against us, our customers or our third-party intellectual property providers, we may be required to pay substantial damages to the party claiming infringement, stop selling products or using technology that contains the allegedly infringing intellectual property, or enter into royalty or license agreements that may not be available on acceptable terms, if at all. Parties making infringement claims may also be able to bring an action before the International Trade Commission that could result in an order stopping the importation into the United States of our solar cells. Any of these judgments could materially damage the our business. We may have to develop non-infringing technology, and our failure in doing so or in obtaining licenses to the proprietary rights on a timely basis could have a material adverse effect on our business.

SunPower or PowerLight may file claims against other parties for infringing our intellectual property that may be very costly and may not be resolved in our favor.

We cannot guarantee that infringement of SunPower’s or PowerLight’s intellectual property by other parties does not exist now or that it will not occur in the future. To protect our intellectual property rights and to maintain our competitive advantage, we may file suits against parties who we believe infringe our intellectual property. Intellectual property litigation is expensive and time consuming and could divert management’s attention from our business and could have a material adverse effect on our business, operating results or financial condition, and our enforcement efforts may not be successful. In certain situations, we may have to bring such suit in foreign jurisdictions, in which case we are subject to additional risk as to the result of the proceedings and the amount of damage that we can recover. Certain foreign jurisdictions may not provide protection to intellectual property comparable to that in the United States. Our engagement in intellectual property enforcement actions may negatively impact our financial results.

We may not be able to prevent others from using the SunPower and PowerLight names or similar marks in connection with their solar power products which could adversely affect the market recognition of our name and our revenue.

“SunPower” is our registered trademark in the United States for use with solar cells and solar panels. We are seeking similar registration of the “SunPower” trademark in foreign countries but we may not be successful in some of these jurisdictions. For example, we have received initial rejection of our application to register the “SunPower” trademark in Canada and Japan based on prior registration by other people. In the foreign jurisdictions where we are unable to obtain this registration or have not tried, others may be able to sell their products using the SunPower trademark which could lead to customer confusion. In addition, if there are jurisdictions where someone else has already established trademark rights in the SunPower name, we may face trademark disputes and may have to market our products with other trademarks, which also could hurt our marketing efforts. We may encounter trademark disputes with companies using marks which are confusingly

 

43


Table of Contents

similar to SunPower which if not resolved favorably could cause our branding efforts to suffer. In addition, we may have difficulty in establishing strong brand recognition with consumers if others use similar marks for similar products.

PowerLight holds registered trademarks for PowerLight®, PowerGuard® , PowerTracker® and SunTile® in the United States, registered trademarks for PowerLight® and PowerGuard® in Europe, and a pending trademark application for PowerTilt in the United States. It has not registered, and may not be able to register, these trademarks elsewhere.

SunPower and PowerLight rely primarily upon copyright and trade secret laws and contractual restrictions to protect our proprietary rights, and, if these rights are not sufficiently protected, our ability to compete and generate revenue could suffer.

SunPower and PowerLight seek to protect our proprietary manufacturing processes, documentation and other written materials primarily under trade secret and copyright laws. We also typically require employees and consultants with access to our proprietary information to execute confidentiality agreements. The steps taken by us to protect our proprietary information may not be adequate to prevent misappropriation of our technology. In addition, our proprietary rights may not be adequately protected because:

 

   

people may not be deterred from misappropriating our technologies despite the existence of laws or contracts prohibiting it;

 

   

policing unauthorized use of our intellectual property may be difficult, expensive and time-consuming, and we may be unable to determine the extent of any unauthorized use; and

 

   

the laws of other countries in which we market our solar cells, such as some countries in the Asia/Pacific region, may offer little or no protection for our proprietary technologies.

Reverse engineering, unauthorized copying or other misappropriation of our proprietary technologies could enable third parties to benefit from our technologies without paying us for doing so. Any inability to adequately protect our proprietary rights could harm our ability to compete, to generate revenue and to grow our business.

Neither SunPower nor PowerLight may obtain sufficient patent protection on the technology embodied in the solar cells or solar system components we currently manufacture and market, which could harm our competitive position and increase our expenses.

Although SunPower and PowerLight rely primarily on trade secret laws and contractual restrictions to protect the technology in the solar cells and solar system components we currently manufacture and market, our success and ability to compete in the future may also depend to a significant degree upon obtaining patent protection for our proprietary technology. As of December 31, 2006, in the United States, SunPower owned eight issued patents and jointly owned another three patents, and had 17 U.S. and 12 foreign patent applications pending. These patent applications cover aspects of the technology in the solar cells we currently manufacture and market. Patents that we currently own or license-in do not cover the solar cells that we presently manufacture and market. As of December 31, 2006, including the United States and foreign countries, PowerLight had a total 61 issued patents and 47 pending patent applications. PowerLight intends to continue to seek patent protection for those aspects of its technology, designs, and methodologies and processes that it believes provide significant competitive advantages. PowerLight’s material patents primarily relate to PowerGuard® , PowerTilt and PowerTracker®.

Our patent applications may not result in issued patents, and even if they result in issued patents, the patents may not have claims of the scope we seek. In addition, any issued patents may be challenged, invalidated or declared unenforceable. The term of any issued patents would be 20 years from their filing date and if our applications are pending for a long time period, we may have a correspondingly shorter term for any patent that

 

44


Table of Contents

may issue. Our present and future patents may provide only limited protection for our technology and may not be sufficient to provide competitive advantages to us. For example, competitors could be successful in challenging any issued patents or, alternatively, could develop similar or more advantageous technologies on their own or design around our patents. Also, patent protection in certain foreign countries may not be available or may be limited in scope and any patents obtained may not be as readily enforceable as in the United States, making it difficult for us to effectively protect our intellectual property from misuse or infringement by other companies in these countries. Our inability to obtain and enforce our intellectual property rights in some countries may harm our business. In addition, given the costs of obtaining patent protection, we may choose not to protect certain innovations that later turn out to be important.

If the effective term of SunPower’s or PowerLight’s patents is decreased due to changes in patent laws or if we need to refile some of our patent applications, the value of our patent portfolio and the revenue we derive from products protected by the patents may be decreased.

The value of SunPower’s and PowerLight’s patents depends in part on their duration. A shorter period of patent protection means less value of a patent. For example, the United States patent laws were amended in 1995 to change the term of patent protection from 17 years after the date of the patent’s issuance to 20 years after the earliest effective filing date of the application for a patent, unless the application was pending on June 8, 1995, in which case the term of a patent’s protection expires either 17 years after its issuance or 20 years after its filing, whichever is later. Because the time required from the filing of patent application to issuance of a patent is often longer than three years, a 20-year patent term from the filing date may result in substantially shorter patent protection. Also, we may need to refile some of our patent applications and, in these situations, the patent term will be measured from the date of the earliest priority application to which benefit is claimed in such a patent application. This would also shorten our period of patent exclusivity. A shortened period of patent exclusivity may negatively impact our revenue protected by our patents.

SunPower’s and PowerLight’s intellectual property indemnification practices may adversely impact our business.

SunPower and PowerLight are required by contract to indemnify some of our customers and our third-party intellectual property providers for certain costs and damages of patent infringement in circumstances where our products are a factor creating the customer’s or these third-party providers’ infringement liability. This practice may subject us to significant indemnification claims by our customers and our third-party providers. We cannot assure you that indemnification claims will not be made or that these claims will not harm our business, operating results or financial condition.

The success of SunPower’s and PowerLight’s business depends on the continuing contributions of our key personnel.

SunPower and PowerLight rely heavily on the services of our key executive officers, including Thomas H. Werner, our Chief Executive Officer, Emmanuel T. Hernandez, our Chief Financial Officer, Dr. Richard Swanson, our President and Chief Technology Officer, PM Pai, our Chief Operating Officer and Thomas L. Dinwoodie, PowerLight’s Chief Executive Officer. The loss of services of any principal member of our management team, particularly Thomas H. Werner, Emmanuel T. Hernandez, Dr. Richard Swanson, PM Pai and Thomas L. Dinwoodie could adversely impact our operations. In addition, our technical personnel represent a significant asset and serve as the source of our technological and product innovations. We believe our future success will depend upon our ability to retain these key employees and our ability to attract and retain other skilled managerial, engineering and sales and marketing personnel. However, we cannot guarantee that any employee will remain employed at the Company for any definite period of time since all of our employees, including Messrs. Werner, Hernandez, Swanson, Pai and Dinwoodie, serve at-will and may terminate their employment at any time for any reason.

 

45


Table of Contents

Our headquarters for both the SunPower and PowerLight businesses, and other facilities, as well as the facilities of certain of our key subcontractors, are located in regions that are subject to earthquakes and other natural disasters.

Our headquarters for both the SunPower and PowerLight businesses, including research and development operations, our manufacturing facilities and the facilities of SunPower’s subcontractor upon which we rely to assemble and test our solar panels are located in countries that are subject to earthquakes and other natural disasters. Our headquarters and research and development operations are located in the United States, SunPower’s manufacturing facilities is located in the Philippines, and the facilities of SunPower’s subcontractor for assembly and test of solar panels is located in China. Since we do not have redundant facilities, any earthquake, tsunami or other natural disaster in these countries could materially disrupt our production capabilities and could result in our experiencing a significant delay in delivery, or substantial shortage, of our solar cells.

Compliance with environmental regulations can be expensive, and noncompliance with these regulations may result in adverse publicity and potentially significant monetary damages and fines for SunPower or PowerLight.

SunPower and PowerLight are required to comply with all foreign, U.S. federal, state and local laws and regulations regarding pollution control and protection of the environment. In addition, under some statutes and regulations, a government agency, or other parties, may seek recovery and response costs from operators of property where releases of hazardous substances have occurred or are ongoing, even if the operator was not responsible for such release or otherwise at fault. We use, generate and discharge toxic, volatile and otherwise hazardous chemicals and wastes in our research and development and manufacturing activities. Any failure by us to control the use of, or to restrict adequately the discharge of, hazardous substances could subject us to potentially significant monetary damages and fines or suspensions in our business operations. In addition, if more stringent laws and regulations are adopted in the future, the costs of compliance with these new laws and regulations could be substantial. To date such laws and regulations have not had a significant impact on SunPower’s or our PowerLight business’ operations, and we believe that we have all necessary permits to conduct their respective operations as they are presently conducted. If we fail to comply with present or future environmental laws and regulations, however, we may be required to pay substantial fines, suspend production or cease operations. Under SunPower’s separation agreement with Cypress, SunPower will indemnify Cypress from any environmental liabilities associated with SunPower’s operations and facilities in San Jose, California and the Philippines.

SunPower maintains self-insurance for certain indemnities we have made to SunPower’s and PowerLight’s officers and directors.

SunPower’s certificate of incorporation, by-laws and indemnification agreements require us to indemnify the officers and directors of SunPower and PowerLight for certain liabilities that may arise in the course of their service to us. We self-insure with respect to potential indemnifiable claims. Although we have insured our officers and directors against certain potential third-party claims for which we are legally or financially unable to indemnify them, we intend to self-insure with respect to potential third-party claims which give rise to direct liability to such third-party or an indemnification duty on our part. If we were required to pay a significant amount on account of these liabilities for which we self-insure, our business, financial condition and results of operations could be seriously harmed.

Changes to financial accounting standards may affect our combined results of operations and cause SunPower and/or PowerLight to change our business practices.

We prepare our financial statements to conform with U.S. GAAP. These accounting principles are subject to interpretation by the American Institute of Certified Public Accountants, the SEC and various bodies formed to interpret and create appropriate accounting policies. A change in those policies can have a significant effect on our combined reported results and may affect our reporting of transactions completed before a change is

 

46


Table of Contents

announced. Changes to those rules or the questioning of current practices may adversely affect our reported financial results or the way we conducts our business. For example, accounting policies affecting many aspects of our business, including rules relating to employee stock option grants, have recently been revised. The Financial Accounting Standards Board, or the FASB, and other agencies have made changes to U.S. GAAP, that required U.S. companies, starting in the first quarter of fiscal 2006, to record a charge to earnings for employee stock option grants and other equity incentives. We may have significant and ongoing accounting charges resulting from option grant and other equity awards that could reduce our net income or increase our net loss. In addition, since SunPower and PowerLight historically used equity-related compensation as a component of their total employee compensation program, the accounting change could make the use of equity-related compensation less attractive to us and therefore make it more difficult to attract and retain employees.

If SunPower fails to maintain an effective system of internal controls, we may not be able to accurately report our financial results or prevent fraud. As a result, current and potential stockholders could lose confidence in our financial reporting, which could harm our business and the trading price of our common stock.

Beginning in connection with this Annual Report on Form 10-K for the fiscal year ended December 31, 2006, Section 404 of the Sarbanes-Oxley Act of 2002 requires SunPower to evaluate and report on our internal controls over financial reporting and have our independent registered public accounting firm annually attest to our evaluation, as well as issue its own opinion on our internal control over financial reporting. We have concluded and our independent registered public accounting firm has attested that SunPower’s internal control over financial reporting was effective as of December 31, 2006. However, we have in the past discovered, and may in the future discover, areas of our internal controls that need improvement. SunPower is complying with Section 404 by strengthening, assessing and testing our system of internal controls to provide the basis for our report. However, the continuous process of strengthening our internal controls and complying with Section 404 is expensive and time consuming, and requires significant management attention. We cannot be certain that these measures will ensure that we will maintain adequate control over our financial processes and reporting, or that we or our independent registered public accounting firm will be able to provide the attestation and opinion required under Section 404 in future Annual Reports on Form 10-K. If we or our independent registered public accounting firm discover a material weakness, the disclosure of that fact, even if quickly remedied, could reduce the market’s confidence in our financial statements and harm our stock price. In addition, future non-compliance with Section 404 could subject us to a variety of administrative sanctions, including the suspension or delisting of our common stock from The Nasdaq Global Market and the inability of registered broker-dealers to make a market in our common stock, which would further reduce our stock price.

Our efforts to establish an effective, unified system of internal control over financial reporting with respect to PowerLight could present challenges and we may not be able to accurately report our financial results or prevent fraud on a combined basis.

PowerLight has not been required to prepare a report on the effectiveness of its internal controls over financial reporting because it was not subject to the informational requirements of the Securities Exchange Act of 1934, as amended, or the Exchange Act. In August 2006, PowerLight’s audit committee received a letter from its independent auditors identifying certain material weaknesses in its internal controls over financial reporting relating to its audits for 2005, 2004 and 2003. These material weaknesses included problems with financial statement close processes and procedures, inadequate accounting resources, unsatisfactory application of the percentage of completion accounting method, inaccurate physical inventory counts, incorrect accounting for complex capital transactions and inadequate disclosure of related party transactions. In addition, PowerLight had to restate its 2004 and 2003 financial statements to correct previously reported amounts primarily related to its contract revenue, contract costs, accrued warranty, California state sales tax accrual and inventory items. We have begun remediation efforts with respect to the material weaknesses identified by PowerLight’s independent auditors. Although initiated, our plan to improve the effectiveness of the internal controls and processes at PowerLight is not complete. It will take some time to put in place the rigorous disclosure controls and procedures desired by our management and our board of directors. While we expect to complete this remediation process as quickly as possible, doing so depends on several factors beyond our control, including the hiring of additional

 

47


Table of Contents

qualified personnel and, as a result, we cannot at this time estimate how long it will take to complete the steps identified above. Our management will continue to evaluate the effectiveness of the control environment at PowerLight and will continue to refine existing controls. We cannot assure you that the measures we have taken to date or any future measures will remediate the material weaknesses reported by PowerLight’s independent auditors. Additional deficiencies in PowerLight’s or our internal controls may be discovered in the future. Any failure to develop or maintain effective controls, or any difficulties encountered in their implementation or improvement, could harm our operating results or cause us to fail to meet our reporting obligations and may result in a restatement of our prior period financial statements. Ineffective internal controls could also cause investors to lose confidence in our reported financial information, which would likely have a negative effect on the trading price of our securities.

We are responsible for establishing and maintaining disclosure controls and procedures as defined in the Exchange Act Rules. We are required to report on the effectiveness of our internal controls over financial reporting for the first time in this annual report on Form 10-K for the fiscal year ended December 31, 2006, although our report on our internal controls over financial reporting is not required to include an assessment of PowerLight’s internal controls until our annual report on Form 10-K for the fiscal year ended December 31, 2008 (the first fiscal year to end after the date of the Merger), unanticipated factors may hinder the effectiveness or delay the integration of SunPower’s and PowerLight’s control systems. We cannot predict whether we will be able to establish an effective, unified system of internal controls over financial reporting.

SunPower faces competition in the market for our imaging detectors and infrared detectors, and if we fail to compete effectively, we will lose or fail to gain market share.

SunPower competes with companies such as Hamamatsu Photonics K.K. and UDT Sensors, Inc. in the market for high performance imaging detectors. In addition we compete with companies such as Vishay Intertechnology, Inc., Rohm Co., Ltd. and Agilent Technologies, Inc. in the market for infrared detectors. We may face competition in the future from other manufacturers of high performance imaging detectors, infrared detectors or alternative devices. The use of alternative devices, including low power, high data rate wireless protocols, may replace existing detectors and limit our market opportunity. Our current and future competitors may have longer operating histories, greater name recognition and greater financial, sales and marketing, technical and other resources than us or may develop technologies superior to those incorporated in our imaging detectors and infrared detectors. If we fail to compete successfully, we may be unable to expand our customer base for our imaging detectors and our business would suffer.

Because of the lengthy sales cycles for SunPower’s imaging detectors and the relatively fixed nature of a significant portion of our expenses, we may incur substantial expenses before we earn associated revenue and may not ultimately achieve our forecasted sales for our imaging detectors.

SunPower’s sales cycles from design to manufacture of our imaging detectors can typically take 12 to 18 months. Sales cycles for our imaging detectors are lengthy for a number of reasons, including:

 

   

our customers usually complete an in-depth technical evaluation of our imaging detectors before they place a purchase order;

 

   

the commercial adoption of our imaging detectors is typically limited during the initial release of their products to evaluate performance and consumer demand;

 

   

failure to deliver a product in a timely manner can seriously delay or cancel introduction; and

 

   

the development and commercial introduction of products incorporating complex technology frequently are delayed or canceled.

As a result of our lengthy sales cycles, SunPower may incur substantial expenses before we earn associated revenue because a significant portion of our operating expenses is relatively fixed and based on expected revenue. If customer cancellations or product changes occur, this could result in the loss of anticipated sales without allowing us sufficient time to reduce our operating expenses.

 

48


Table of Contents

SunPower’s debt agreements contain covenant restrictions that may limit our ability to operate our business.

The agreements governing SunPower’s credit facilities contain, and any of our other future debt agreements may contain, covenant restrictions that limit our ability to operate our business, including restrictions on our ability to:

 

   

incur additional debt or issue guarantees;

 

   

create liens;

 

   

make certain investments;

 

   

enter into transactions with our affiliates;

 

   

sell certain assets;

 

   

redeem capital stock or make other restricted payments;

 

   

declare or pay dividends or make other distributions to stockholders; and

 

   

merge or consolidate with any person.

In addition, our credit facilities contain additional affirmative and negative covenants that are more restrictive than those contained in the indenture governing the debentures. Our ability to comply with these covenants is dependent on our future performance, which will be subject to many factors, some of which are beyond our control, including prevailing economic conditions.

As a result of these covenants, our ability to respond to changes in business and economic conditions and to obtain additional financing, if needed, may be significantly restricted, and we may be prevented from engaging in transactions that might otherwise be beneficial to us. In addition, our failure to comply with these covenants could result in a default under the debentures and our other debt, which could permit the holders to accelerate such debt. If any of our debt is accelerated, we may not have sufficient funds available to repay such debt.

Provisions of SunPower’s debentures issued in February 2007 could discourage an acquisition of us by a third party.

Certain provisions of the $200.0 million in principal amount of 1.25% senior convertible debentures we issued in February could make it more difficult or more expensive for a third party to acquire us. Upon the occurrence of certain transactions constituting a fundamental change, holders of the debentures will have the right, at their option, to require us to repurchase, at a cash repurchase price equal to 100% of the principal amount plus accrued and unpaid interest on the debentures, all of their debentures or any portion of the principal amount of such debentures in integral multiples of $1,000. We may also be required to issue additional shares of our class A common stock upon conversion of the debentures in the event of certain fundamental changes.

Risks Related to SunPower’s Class A Common Stock

The effect of the issuance of our shares of class A common stock pursuant to the share lending agreement, including sales of our class A common stock in short sale transactions by purchasers of the Debentures, may lower the market price of our class A common stock.

Concurrently with our February 2007 offering of debentures, we offered 2,947,132 shares of our class A common stock, all of which are being borrowed by an affiliate of Lehman Brothers Inc., under a share lending agreement we have entered into with such affiliate and Lehman Brothers Inc. We will not receive any proceeds from that offering of class A common stock, but we will receive a nominal lending fee from that affiliate.

Such loaned shares must be returned to us by February 15, 2027, or earlier in certain circumstances. Such affiliate of Lehman Brothers Inc. has agreed to use such sales to facilitate the establishment by the debenture

 

49


Table of Contents

investors of hedged positions in the offering of our debentures. The market price of our class A common stock could be negatively affected by these or other short sales of our class A common stock by the purchasers of the debentures to hedge investments in the debentures. In addition, the effect of the increase in the number of outstanding shares of our class A common stock issued pursuant to the share lending agreement could have a negative effect on the market price of our class A common stock.

Conversion of the debentures will dilute the ownership interest of existing stockholders, including holders who had previously converted their debentures.

To the extent we issue class A common stock upon conversion of the debentures, the conversion of some or all of the debentures will dilute the ownership interests of existing stockholders, including holders who had previously converted their debentures. Any sales in the public market of the class A common stock issuable upon such conversion could adversely affect prevailing market prices of our class A common stock. In addition, the existence of the debentures may encourage short selling by market participants because the conversion of the debentures could depress the price of our class A common stock.

Substantial future sales or other dispositions of our class A common stock or other securities could cause our stock price to fall.

Sales of our class A common stock in the public market or sales of any of our other securities, or the perception that such sales could occur, could cause the market price of our class A common stock to decline. As of February 23, 2007, SunPower had 22,318,702 shares of class A common stock outstanding, and Cypress owned the 52,033,287 outstanding shares of SunPower’s class B common stock, representing approximately 70% of the total outstanding shares of SunPower’s common stock. Cypress may convert these shares into class A common stock at any time. Cypress has no contractual obligation to retain its shares of class A common stock, except that Cypress has agreed not to sell or distribute any of its shares of our common stock without the consent of Lehman Brothers Inc. and Credit Suisse Securities (USA) LLC until 60 days after February 2, 2007, the date of prospectus supplement for the debentures. Subject to applicable United States federal and state securities laws, Cypress may sell or distribute to its stockholders any or all of the shares of our common stock that it owns, which may or may not include the sale of a controlling interest in us. Cypress announced on October 6, 2006 and reiterated on October 19, 2006 that it was exploring ways in which to allow its stockholders to fully realize the value of its investment in SunPower. Cypress has made public statements since October 19, 2006 that were consistent with these announcements.

We filed a registration statement on Form S-8 under the Securities Act covering 6,332,549 shares of SunPower class A common stock issuable under outstanding options under SunPower’s 1988 Incentive Stock Plan, under SunPower’s 1996 Stock Plan and under non-plan options granted to employees and consultants and 147,286 shares reserved for future issuance as of December 31, 2006 under SunPower’s 2005 Stock Incentive Plan. We have also registered for resale up to 4,106,884 shares of class A common stock for resale by holders of former PowerLight shares. These shares are available for sale in the open market, although sales of shares held by PowerLight shareholders who are now affiliates of SunPower will be subject to sales restrictions under the Securities Act. In addition, we recently filed a registration statement on Form S-8 under the Securities Act covering 1,602,027 shares of class A common stock issuable pursuant to options, some of which are subject to vesting, assumed pursuant to the Merger.

If Cypress elects to convert its shares of class B common stock into shares of class A common stock, an additional 52,033,287 shares of class A common stock will be available for sale, subject to customary sales restrictions. In addition, except for a limited time in connection with the Merger, Cypress has the right to cause us to register the sale of its shares of class A common stock under the Securities Act. Registration of these shares under the Securities Act would result in these shares, other than shares purchased by our affiliates, becoming freely tradable without restriction under the Securities Act.

 

50


Table of Contents

If Cypress distributes to its stockholders shares of class A common stock that it owns, substantially all of these shares would be eligible for immediate resale in the public market. We are unable to predict whether significant amounts of class A common stock would be sold in the open market in anticipation of, or after, any such distribution. We also are unable to predict whether a sufficient number of buyers for shares of our class A common stock would be in the market at that time.

If securities or industry analysts do not publish research or reports about us, our business or our market, or if they change their recommendations regarding our stock adversely, our stock price and trading volume could decline.

The trading market for our class A common stock is influenced by the research and reports that industry or securities analysts publish about us, our business or our market. We have only been a public company since our initial public offering in November 2005, and accordingly our stock is covered by fewer securities analysts than that of more mature public companies. If one or more of the analysts who cover us change their recommendation regarding our stock adversely, our stock price would likely decline. If one or more of these analysts cease coverage of our company or fail to regularly publish reports on us, we could lose visibility in the financial markets, which in turn could cause our stock price or trading volume to decline.

The price of our class A common stock, and therefore of the debentures may fluctuate significantly, and a liquid trading market for our class A common stock may not be sustained.

Our class A common stock has a limited trading history in the public markets. The trading price of our class A common stock could be subject to wide fluctuations due to the factors discussed in this risk factors section and in the risk factors incorporated by reference. In addition, the stock market in general, and The Nasdaq Global Market and the securities of technology companies in particular, have experienced extreme price and volume fluctuations. These trading prices and valuations, including our own market valuation and those of companies in our industry generally, may not be sustainable. These broad market and industry factors may decrease the market price of our class A common stock, regardless of our actual operating performance. Moreover, because the debentures are convertible into our class A common stock, volatility or depressed prices of our class A common stock could have a similar effect on the trading price of the debentures. In addition, in the past, following periods of volatility in the overall market and the market price of a company’s securities, securities class action litigation has often been instituted against these companies. This litigation, if instituted against us, could result in substantial costs and a diversion of our management’s attention and resources.

The difference in the voting rights of our class A and our class B common stock may reduce the value and liquidity of our class A common stock.

The rights of class A and class B common stock are substantially similar, except with respect to voting, conversion and other protective provisions. The class B common stock is entitled to eight votes per share and the class A common stock is entitled to one vote per share. The difference in the voting rights of our class A and class B common stock both before and after any distribution of our class B common stock by Cypress to its stockholders could reduce the value of the class A common stock to the extent that any investor or potential future purchaser of our common stock ascribes value to the right of class B common stock to eight votes per share. The existence of two classes of common stock could result in less liquidity for either class of common stock than if there were only one class of our common stock.

Delaware law and our corporate charter and bylaws contain anti-takeover provisions that could delay or discourage takeover attempts that stockholders may consider favorable.

Provisions in our restated certificate of incorporation may have the effect of delaying or preventing a change of control or changes in our management. These provisions include the following:

 

   

the right of the board of directors to elect a director to fill a vacancy created by the expansion of the board of directors;

 

51


Table of Contents
   

the prohibition of cumulative voting in the election of directors, which would otherwise allow less than a majority of stockholders to elect director candidates;

 

   

the requirement for advance notice for nominations for election to the board of directors or for proposing matters that can be acted upon at a stockholders’ meeting;

 

   

the ability of the board of directors to issue, without stockholder approval, up to 10,042,490 shares of preferred stock with terms set by the board of directors, which rights could be senior to those of common stock; and

 

   

in the event that Cypress, its successors in interest and its subsidiaries no longer collectively own shares of our common stock equal to at least 40% of the shares of all classes of our common stock then outstanding and Cypress is no longer consolidating us for accounting purposes:

 

   

our board of directors will be divided into three classes of directors, with the classes to be as nearly equal in number as possible;

 

   

no action can be taken by stockholders except at an annual or special meeting of the stockholders called in accordance with our bylaws, and stockholders may not act by written consent;

 

   

stockholders may not call special meetings of the stockholders; and

 

   

our board of directors will be able to alter our bylaws without obtaining stockholder approval.

Until such time as Cypress, its successor in interest and its subsidiaries collectively own less than 40% of the shares of all classes of our common stock then outstanding and Cypress is no longer consolidating us for accounting purposes, the affirmative vote of at least 75% of the then-authorized number of members of our board of directors will be required to: (1) adopt, amend or repeal our bylaws or certificate of incorporation; (2) appoint or remove our chief executive officer; (3) designate, appoint or allow for the nomination or recommendation for election by our stockholders of an individual to our board of directors; (4) change the size of our board of directors to be other than five members; (5) form a committee of our board of directors or establish or change a charter, committee responsibilities or committee membership of any committee of our board of directors; (6) adopt any stockholder rights plan, “poison pill” or other similar arrangement; or (7) approve any transactions that would involve a merger, consolidation, restructuring, sale of substantially all of our assets or any of our subsidiaries or otherwise result in any person or entity obtaining control of us or any of our subsidiaries. Cypress may at any time in its sole discretion waive this requirement to obtain such a supermajority vote of our board of directors.

In addition, we are governed by the provisions of Section 203 of the Delaware General Corporation Law, or the DGCL. These provisions may prohibit large stockholders, in particular those owning 15% or more of our outstanding voting stock, from merging or combining with us. These provisions in our restated certificate of incorporation, bylaws and under Delaware law could discourage potential takeover attempts and could reduce the price that investors might be willing to pay for shares of our common stock in the future and result in the market price being lower than they would without these provisions.

As a result of SunPower’s offering of debentures completed in February 2007, we will have a significant amount of debt. Our substantial indebtedness could adversely affect our business, financial condition and results of operations and our ability to meet our payment obligations under the debentures and our other debt.

As a result of our $200.0 million debenture offering completed in February 2007, we have significant indebtedness and substantial debt service requirements.

This level of debt could have significant consequences on our future operations, including:

 

   

making it more difficult for us to meet our payment and other obligations under the debentures and our other outstanding debt;

 

52


Table of Contents
   

resulting in an event of default if we fail to comply with the financial and other restrictive covenants contained in our debt agreements, which event of default could result in all of our debt becoming immediately due and payable;

 

   

reducing the availability of our cash flow to fund working capital, capital expenditures, acquisitions and other general corporate purposes, and limiting our ability to obtain additional financing for these purposes;

 

   

subjecting us to the risk of increased sensitivity to interest rate increases on our indebtedness with variable interest rates, including borrowings under our amended senior credit facility;

 

   

limiting our flexibility in planning for, or reacting to, and increasing our vulnerability to, changes in our business, the industry in which we operate and the general economy; and

 

   

placing us at a competitive disadvantage compared to our competitors that have less debt or are less leveraged.

Any of the above-listed factors could have an adverse effect on our business, financial condition and results of operations and our ability to meet our payment obligations under the debentures and our other debt.

Our ability to meet our payment and other obligations under our indebtedness depends on our ability to generate significant cash flow in the future. This, to some extent, is subject to general economic, financial, competitive, legislative and regulatory factors as well as other factors that are beyond our control. There is no assurance that our business will generate cash flow from operations, or that future borrowings will be available to us under our existing or any amended credit facilities or otherwise, in an amount sufficient to enable us to meet our payment obligations under the debentures and our other debt and to fund other liquidity needs. If we are not able to generate sufficient cash flow to service our debt obligations, we may need to refinance or restructure our debt, including the debentures, sell assets, reduce or delay capital investments, or seek to raise additional capital. If we are unable to implement one or more of these alternatives, we may not be able to meet our payment obligations under the debentures and our other debt.

Risks Related to Our Relationship with Cypress Semiconductor Corporation

As long as Cypress controls us, the ability of our other stockholders to influence matters requiring stockholder approval will be limited.

As of February 23, 2007, Cypress owned all 52,033,287 shares of outstanding SunPower class B common stock, representing approximately 70% of the total outstanding shares of SunPower common stock, or approximately 64% of such shares on a fully diluted basis after taking into account outstanding options, and 95% of the voting power of SunPower’s outstanding capital stock. Shares of class A common stock and class B common stock have substantially similar rights, preferences and privileges except with respect to voting and conversion rights and other protective provisions. Shares of class B common stock are entitled to eight votes per share of class B common stock, and shares of class A common stock are entitled to one vote per share of class A common stock. If Cypress transfers shares of class B common stock to any party other than a successor in interest or a subsidiary of Cypress prior to a tax-free distribution to its stockholders, those shares would automatically convert into shares of class A common stock. Other than through such transfers or voluntary conversions by Cypress of shares of class B common stock into shares of class A common stock, only at such time, if at all, that Cypress, its successors in interest (not including its stockholders following a dissolution) and its subsidiaries collectively own less than 40% of the shares of all classes of our common stock then outstanding will all shares of class B common stock automatically convert into shares of our class A common stock on a one-for-one basis. Until such time, by virtue of the voting power afforded the shares of class B common stock, Cypress will be able to effectively elect all of the members of our board of directors.

In addition, until such time as Cypress, its successors in interest and its subsidiaries collectively own less than 40% of the shares of all classes of our common stock then outstanding and Cypress is no longer

 

53


Table of Contents

consolidating us for accounting purposes, Cypress will have the ability to take stockholder action without the vote of any other stockholder and, by virtue of the voting power afforded the shares of class B common stock, investors will not be able to affect the outcome of any stockholder vote during this period. As a result, Cypress will have the ability to control all matters affecting us, including:

 

   

the composition of our board of directors and, through the board of directors, any determination with respect to the Combined Company’s business plans and policies, including the appointment and removal of officers;

 

   

any determinations with respect to mergers and other business combinations;

 

   

our acquisition or disposition of assets;

 

   

our financing activities;

 

   

changes to the agreements providing for our separation from Cypress;

 

   

the allocation of business opportunities that may be suitable for us;

 

   

the payment of dividends on the class A common stock; and

 

   

the number of shares available for issuance under our stock plans.

Cypress’s voting control may discourage transactions involving a change of control of SunPower, including transactions in which holders of class A common stock might otherwise receive a premium for their shares over the then current market price. Except for a limited time in connection with the Merger, Cypress is not prohibited from selling a controlling interest in us to a third party and may do so without approval of holders of class A common stock and without providing for a purchase of class A common stock. Accordingly, shares of class A common stock may be worth less than they would be if Cypress did not maintain voting control over us.

Our ability to continue to manufacture our imaging detectors and our solar cells in our current facilities with our current and planned manufacturing capacities, and therefore to maintain and increase revenue and achieve profitability, depends to a large extent upon the continued success of our relationship with Cypress.

Our imaging detectors are manufactured for us by Cypress and are processed and tested in our San Jose, California facility. We do not have a long-term fixed-price agreement with Cypress for the manufacturing of our imaging detectors, but instead operate on a purchase order basis. The processes for manufacturing our imaging detectors are highly complex, specialized and proprietary. If Cypress is unable to continue manufacturing our imaging detectors for us, our manufacturing output would be interrupted and delayed, and we would incur increased expenses in establishing relationships with alternative manufacturers at market prices. We may not be able to find alternative manufacturers on terms acceptable to us, and we may be unable to establish our own operations in a timely or cost-effective manner, if at all.

We manufacture our solar cells in our Philippines manufacturing facility which we lease from Cypress. We are in the process of expanding existing facilities for solar and panel assembly. If we are unable to expand in our current facility or are required to move our manufacturing facility, we would incur significant expenses as well as lost sales. Furthermore, we may not be able to locate a facility that meets our needs on terms acceptable to us. Any of these circumstances would increase our expenses and decrease our total revenue and could prevent us from sustaining profitability.

Our historical financial information as a business segment of Cypress may not be representative of our results as an independent public company.

Our historical financial information does not necessarily reflect what our financial position, results of operations or cash flows would have been had we been an independent entity. The historical costs and expenses reflected in our audited and unaudited consolidated financial statements include an allocation for certain

 

54


Table of Contents

corporate functions historically provided by Cypress, including centralized legal, tax, treasury, information technology, employee benefits and other Cypress corporate services and infrastructure costs. These expense allocations were based on what we and Cypress considered reasonable reflections of the utilization of services provided or the benefit received by us. Our historical financial information is not necessarily indicative of what our results of operations, financial position, cash flows or costs and expenses will be in the future. We have not made adjustments to such historical financial information to reflect many significant changes that occurred or may yet occur in our cost structure, funding and operations as a result of our separation from Cypress, including changes in our employee base, changes in our tax structure, potential increased costs associated with reduced economies of scale and increased costs associated with being a publicly traded, stand-alone company.

Our ability to operate our business effectively may suffer if we are unable to cost-effectively establish our own administrative and other support functions in order to operate as a stand-alone company after the expiration of our services agreements with Cypress.

As a subsidiary of Cypress, we have relied on administrative and other resources of Cypress to operate our business. In connection with our initial public offering, we entered into various service agreements to retain the ability for specified periods to use these Cypress resources. These agreements will expire upon the earlier or November 2009 or a change of control of our Company. We need to create our own administrative and other support systems or contract with third parties to replace Cypress’ systems. In addition, we recently established disclosure controls and procedures and internal control over financial reporting as part of our becoming a separate public company in November 2005. These services may not be provided at the same level as when we were a wholly owned subsidiary of Cypress, and we may not be able to obtain the same benefits that we received prior to the separation. These services may not be sufficient to meet our needs, and after our agreements with Cypress expire, we may not be able to replace these services at all or obtain these services at prices and on terms as favorable as we currently have with Cypress. Any failure or significant downtime in our own administrative systems or in Cypress’ administrative systems during the transitional period could result in unexpected costs, impact our results and/or prevent us from paying our suppliers or employees and performing other administrative services on a timely basis.

We may experience increased costs resulting from a decrease in our purchasing power and we may have difficulty obtaining new customers due to our relatively small size after our separation from Cypress.

Historically, we were able to take advantage of Cypress’ size and purchasing power in procuring goods, technology and services, including insurance, employee benefit support and audit services. We are a smaller company than Cypress, and we cannot assure you that we will have access to financial and other resources comparable to those available to us prior to our separation from Cypress. These risks would be come more pronounced if Cypress were to cease to own a majority of our stock. As an independent company, we may be unable to obtain goods, technology and services at prices or on terms as favorable as those available to us prior to our separation from Cypress, which could increase our costs and reduce our profitability. In addition, as a smaller, separate, stand-alone company, we may encounter more customer concerns about our viability as a separate entity, which could harm our business, financial condition and results of operations. Our future success depends on our ability to maintain our current relationships with existing customers, and we may have difficulty attracting new customers.

Our agreements with Cypress require us to indemnify Cypress for certain tax liabilities. These indemnification obligations may limit our ability to obtain additional financing or participate in future acquisitions for up to two years.

We have entered into a tax sharing agreement with Cypress, under which we and Cypress agree to indemnify one another for certain taxes and similar obligations that the other party could incur under certain circumstances. In general, we will be responsible for taxes relating to our business. Furthermore, we may be held jointly and severally liable for taxes determined on a consolidated basis even though Cypress is required to

 

55


Table of Contents

indemnify us for its taxes pursuant to the tax sharing agreement. After the date we cease to be a member of Cypress’ consolidated group for federal income tax purposes or state income tax purposes, as and to the extent that we become entitled to utilize on our separate tax returns portions of those credit or loss carryforwards existing as of such date, we will distribute to Cypress the tax effect (estimated to be 34% for federal income tax purposes) of the amount of such tax loss carryforwards so utilized and the amount of any credit carryforwards so utilized. We will distribute these amounts to Cypress in cash or in our shares, at our option. Upon completion of our follow-on public offering of class A common stock in June 2006, we were no longer considered to be a member of Cypress’ consolidated group for federal income tax purposes. Accordingly, we will be subject to the obligations payable to Cypress for any federal income tax credit or loss carryforwards utilized in its federal tax returns. As of December 31, 2006, we had approximately $50.6 million of federal net operating loss carryforwards and approximately $4.8 million of California net operating loss carryforwards, meaning that such potential future payments to Cypress, which would be made over a period of several years, would therefore aggregate between $15.0 million and $16.0 million.

If Cypress distributes our class B common stock to Cypress stockholders in a transaction intended to qualify as a tax-free distribution under Section 355 of the Internal Revenue Code, or the Code, Cypress intends to obtain an opinion of counsel to the effect that such distribution qualifies under Section 355 of the Code. Despite such an opinion, however, the distribution may nonetheless be taxable to Cypress under Section 355(e) of the Code if 50% or more of our voting power or economic value is acquired as part of a plan or series of related transactions that includes the distribution of our stock. The tax sharing agreement includes our obligation to indemnify Cypress for any liability incurred as a result of issuances or dispositions of our stock after the distribution, other than liability attributable solely to certain dispositions of our stock by Cypress, that cause Cypress’ distribution of shares of our stock to its stockholders to be taxable to Cypress under Section 355(e) of the Code. Under current law, following a distribution by Cypress and for up to two years thereafter, our obligation to indemnify Cypress will be triggered only if we issue stock or otherwise participate in one or more transactions other than the distribution in which 50% or more of our voting power or economic value is acquired in financing or acquisition transactions that are part of a plan or series of related transactions that includes the distribution. If such an indemnification obligation is triggered, the extent of our liability to Cypress will generally equal the product of (a) Cypress’ top marginal federal and state income tax rate for the year of the distribution, and (b) the difference between the fair market value of our class B common stock distributed to Cypress stockholders and Cypress’ tax basis in such stock as determined on the date of the distribution. Our ability to use our equity to obtain additional financing or to engage in acquisition transactions for a period of time after a distribution will be restricted if we can only sell or issue a limited amount of our stock before triggering our obligation to indemnify Cypress for taxes it incurs under Section 355(e) of the Code.

For example, under the current tax rules, if Cypress were to make a complete distribution of its class B common stock and our total outstanding capital stock at the time of such distribution was 69,000,000 shares, unless we qualified for one of several safe harbor exemptions available under the Treasury Regulations, in order to avoid our indemnification obligation to Cypress, we could not, for up two years from the date of Cypress’ distribution, issue 69,000,000 or more shares of class A common stock, nor could we participate in one or more transactions (excluding the distribution itself) in which 34,500,000 or more shares of our then existing class A common stock were to be acquired in connection with a plan or series of related transactions that includes the distribution. In addition, these limits could be lower depending on certain actions that we or Cypress might take before or after a distribution. If we were to participate in such a transaction, assuming Cypress distributed 52,000,000 shares, Cypress’ top marginal income tax rate is 40% for federal and state income tax purposes, the fair market value of our class B common stock is $42.00 per share and Cypress’ tax basis in such stock is $5.00 per share on the date of their distribution, then our liability under our indemnification obligation to Cypress would be approximately $769.6 million.

Third parties may seek to hold us responsible for liabilities of Cypress.

Third parties may seek to hold us responsible for Cypress’ liabilities. Under our separation agreements with Cypress, Cypress will indemnify us for claims and losses relating to liabilities related to Cypress’ business and

 

56


Table of Contents

not related to our business. However, if those liabilities are significant and we are ultimately held liable for them, we cannot assure you that we will be able to recover the full amount of our losses from Cypress.

Our inability to resolve any disputes that arise between us and Cypress with respect to our past and ongoing relationships may result in a significant reduction of our revenue.

Disputes may arise between Cypress and us in a number of areas relating to our past and ongoing relationships, including:

 

   

labor, tax, employee benefit, indemnification and other matters arising from our separation from Cypress;

 

   

the cost of wafers for our imaging detectors;

 

   

employee retention and recruiting;

 

   

business combinations involving us;

 

   

pricing for transitional services;

 

   

sales or distributions by Cypress of all or any portion of its ownership interest in us;

 

   

the nature, quality and pricing of services Cypress has agreed to provide us; and

 

   

business opportunities that may be attractive to both Cypress and us.

We may not be able to resolve any potential conflicts, and even if we do, the resolution may be less favorable than if we were dealing with an unaffiliated party.

The agreements we entered into with Cypress may be amended upon agreement between the parties. While we are controlled by Cypress, we may not have the leverage to negotiate amendments to these agreements if required on terms as favorable to us as those we would negotiate with an unaffiliated third party.

Some of our directors and executive officers may have conflicts of interest because of their ownership of Cypress common stock, options to acquire Cypress common stock and positions with Cypress.

Some of our directors and executive officers own Cypress common stock and options to purchase Cypress common stock. In addition, some of our directors are executive officers and/or directors of Cypress. Ownership of Cypress common stock and options to purchase Cypress common stock by our directors and officers and the presence of executive officers or directors of Cypress on our board of directors could create, or appear to create, conflicts of interest with respect to matters involving both us and Cypress. For example, corporate opportunities may arise that concern both of our businesses, such as the potential acquisition of a particular business or technology that is complementary to both of our businesses. In these situations, our amended and restated certificate of incorporation provides that directors and officers who are also directors or officers of Cypress have no duty to communicate or present such corporate opportunity to us unless it is specifically applicable to the solar energy business and not applicable to or reasonably related to any business conducted by Cypress, have the right to deal with such corporate opportunity in their sole discretion and shall not be liable to us or our stockholders for breach of fiduciary duty by reason of the fact that such director or officer pursues or acquires such corporate opportunity for itself or for Cypress. In addition, we have not established at this time any procedural mechanisms to address actual or perceived conflicts of interest of these directors and officers and expect that our board of directors, in the exercise of its fiduciary duties, will determine how to address any actual or perceived conflicts of interest on a case-by-case basis. If any corporate opportunity arises and if our directors and officers do not pursue it on our behalf pursuant to the provisions in our amended and restated certificate of incorporation, we may not become aware of, and may potentially lose, a significant business opportunity.

 

57


Table of Contents

Because Cypress is not obligated to distribute to its stockholders or otherwise dispose of our common stock that it owns, we will continue to be subject to the risks described above relating to Cypress’ control of us if Cypress does not complete such a transaction.

Cypress is not obligated to distribute to its stockholders or otherwise dispose of the shares of our class B common stock that it beneficially owns, although it might elect to do so in the future. Cypress announced on October 6, 2006 and reiterated on October 19, 2006 that it was exploring ways in which to allow its stockholders to fully realize the value its investment in us. Cypress has made public statements since October 19, 2006 that were consistent with these announcements. Moreover, completion of any such transaction could be contingent upon, among other things, the receipt of a favorable tax ruling from the Internal Revenue Service and/or a favorable opinion of Cypress’ tax advisor as to the tax-free nature of such a transaction for U.S. federal income tax purposes.

Unless and until such a distribution occurs or Cypress otherwise disposes of shares so that it, its successors in interest and its subsidiaries collectively own less than 40% of the shares of all classes of our common stock then outstanding, we will continue to face the risks described above relating to Cypress’ control of us and potential conflicts of interest between Cypress and us. We may be unable to realize potential benefits that could result from such a distribution by Cypress, such as greater strategic focus, greater access to capital markets, better incentives for employees and more accountable management, although we cannot guarantee that we would realize any of these potential benefits if such a distribution did occur. In addition, speculation by the press, investment community, our customers, our competitors or others regarding whether Cypress intends to complete such a distribution or otherwise dispose of its controlling interest in us could harm our business or lead to volatility in our stock price.

So long as Cypress continues to hold a controlling interest in us or is otherwise a significant stockholder, the liquidity and market price of our class A common stock may be adversely impacted. In addition, there can be no assurance that Cypress will distribute or otherwise dispose of any of its shares of our class B common stock.

Cypress’ ability to replace our board of directors may make it difficult for us to recruit independent directors.

Cypress may at any time replace our entire board of directors. Furthermore, some actions of our board of directors require the approval of 75% of our directors except to the extent this condition is waived by Cypress. As a result, unless and until Cypress, its successors in interest and its subsidiaries collectively own less than 40% of the shares of all classes of our common stock then outstanding and Cypress is no longer consolidating us for accounting purposes, Cypress could exercise significant control over our board of directors. As such, individuals who might otherwise accept a board position at SunPower may decline to serve, and Cypress may be able to control important decisions made by our Board of Directors.

ITEM 1B: UNRESOLVED STAFF COMMENTS

Not applicable.

ITEM 2: PROPERTIES

Our corporate headquarters is located in San Jose, California, where we occupy approximately 44,000 square feet under a lease from Cypress that expires in May 2011. We also lease from Cypress approximately 215,000 square feet in the Philippines, which serves as our solar cell manufacturing facility. This lease expires in July 2021 and it contains a right to purchase the facility from Cypress at any time at Cypress’ original purchase price of approximately $8.0 million plus interest computed on a variable index starting on the date of purchase by Cypress until the sale to us, unless such purchase option is exercised after a change of control of our company, in which case the purchase price shall be at a market rate, as reasonably determined by Cypress. Under the lease, we would pay Cypress at a rate equal to the cost to Cypress for the facility until the earlier of 10 years from

 

58


Table of Contents

November 22, 2005 or a change of control of our company. Thereafter, we will pay market rent for the facility. In December 2005 we leased from an unaffiliated third party approximately 46,300 square foot building in the Philippines for five years, with an option to extend the lease at market rental rates when the term expires. In August 2006, we purchased a 344,000 square feet building in the Philippines. This facility is approximately 20 miles from our existing facilities and is being facilitized to house up to 10 solar cell manufacturing lines. We expect this facility to commence production of the first two to three solar cell lines during 2007. We may require additional space in the future, which may not be available on commercially reasonable terms or in the location we desire.

PowerLight’s corporate headquarters are located in Berkeley, California, where we occupy approximately 26,700 square feet for our corporate offices and approximately 16,700 square feet for our primary assembly plant. PowerLight currently does not own any real property and, therefore, leases the use of these facilities from unaffiliated third parties under leases that expire at various times, beginning in August 2007. From time to time, PowerLight supplements the capacity of our Berkeley assembly plant by utilizing third-party contractors. In addition to these facilities, we also have sales and support offices in New Jersey, Southern California, Europe and South Korea. PowerLight’s European headquarters are located in Geneva, Switzerland. PowerLight maintains a construction office in Regensburg, Germany.

In December 2006, PowerLight entered into an eleven-year lease agreement for a 175,000 square foot facility in Richmond, California, for office, light industrial and research and development use. PowerLight’s move to the new facility is scheduled for the fourth quarter of 2007.

ITEM 3: LEGAL PROCEEDINGS

From time to time we are a party to litigation matters and claims that are normal in the course of our operations. While we believe that the ultimate outcome of these matters will not have a material adverse effect on the Company, the outcome of these matters is not determinable and negative outcomes may adversely affect our financial position, liquidity or results of operations.

ITEM 4: SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS

None.

 

59


Table of Contents

PART II

ITEM 5: MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Our class A common stock is listed on the NASDAQ Global Market under the trading symbol “SPWR.” The high and low trading price of our Series A common stock during the period commencing on November 17, 2005 (our initial public offering date) through December 31, 2005 were $34.75 and $18.00, respectively. The high and low trading price of our Series A common stock during fiscal year 2006 is as follows:

 

     Low    High

Fiscal 2006:

     

First quarter

   $ 29.08    $ 45.09

Second quarter

     24.60      42.00

Third quarter

     23.75      34.25

Fourth quarter

     26.35      40.00

As of February 23, 2007, there were approximately 29 record holders of our class A common stock and there was one record holder of our class B common stock. A substantially greater number of holders of our class A common stock are in “street name” or beneficial holders, whose shares are held of record by banks, brokers and other financial institutions.

Dividends

We have never declared or paid any cash dividend on our capital stock, and we do not currently intend to pay any cash or dividends on our common stock in the foreseeable future. We intend to retain future earnings, if any, to finance the operation and expansion of our business.

Our bank credit facilities place restrictions on us and our subsidiaries’ ability to pay cash dividends. Additionally, our debentures issued in February 2007 allow the holders to convert their bonds into our common stock if we declare a dividend that on a per share basis exceeds 10% of our common stock’s market price.

Equity Compensation Plan Information

The following table provides certain information as of December 31, 2006 with respect to the Company’s equity compensation plans under which equity securities of the Company are authorized for issuance (in thousands, except dollar figures):

 

Plan Category

   Number of securities to
be issued upon exercise
of outstanding options,
warrants and rights
    Weighted average
exercise price of
outstanding
options, warrants
and rights
   Number of securities remaining
available for future issuance
under equity compensation
plans (excluding securities
reflected in the first column)

Equity compensation plans approved by security holders

   4,949     $ 3.99    147

Equity compensation shares not approved by security holders

   31 (1)     2.04    —  
             

Total

   4,980       3.97    147
             

(1) Represents stock options issued to three consultants and one employee on June 17, 2004 for their service in marketing and business development projects. Such options have exercise prices ranging from $0.66 to $2.50 and vest over periods ranging from immediate vesting to five-year vesting.

 

60


Table of Contents

Company Stock Price Performance

The following graph compares the performance of an investment in our class A common stock from the pricing of our initial public offering on November 17, 2005 through December 31, 2006, with the NASDAQ Market Index and with four comparable issuers: Evergreen Solar, Energy Conversion Devices, SolarWorld and Solon AG. The graph assumes $100 was invested on November 17, 2005 in our class A common Stock at the IPO price of $18.00 per share and at the closing prices for the NASDAQ Market Index and each of our peer issuers. It also assumes that any dividends were reinvested on the date of payment without payment of any commissions. The performance shown in the graph represents past performance and should not be considered an indication of future performance.

LOGO

ASSUMES $100 INVESTED ON NOVEMBER 17, 2005

ASSUMES DIVIDEND REINVESTED

FISCAL YEAR ENDED DECEMBER 31, 2006

 

       11/17/05      12/30/05      12/31/06

SunPower Corporation

     $ 100.00      $ 133.56      $ 146.05

NASDAQ Market Index

       100.00        99.32        108.77

Evergreen Solar

       100.00        89.27        63.45

Energy Conversion Devices

       100.00        130.15        108.53

SolarWorld

       100.00        94.63        160.70

Solon AG

       100.00        99.11        91.85

 

61


Table of Contents

ITEM 6: SELECTED CONSOLIDATED FINANCIAL DATA

The following selected consolidated financial data should be read together with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements and related notes included elsewhere in this Annual Report on Form 10-K.

On November 9, 2004, Cypress completed a reverse triangular merger with us in which each share of our then outstanding capital stock not owned by Cypress was valued at $3.30 per share and exchanged for an equivalent number of shares of Cypress common stock. This merger effectively gave Cypress 100% ownership of all of our then outstanding shares of capital stock but left our unexercised warrants and options outstanding. This transaction resulted in the “push down” of the effect of the acquisition of SunPower by Cypress and created a new basis of accounting. See Note 2 of the notes to our consolidated financial statements. The consolidated balance sheet and statements of operations data in this Annual Report prior and up to November 8, 2004, refer to the Predecessor Company and this period is referred to as the pre-merger period, while the consolidated balance sheet and statements of operations data subsequent to November 8, 2004 refer to the Successor Company and this period is referred to as the post-merger period. A black line has been drawn between the accompanying financial statements to distinguish between the pre-merger and post-merger periods.

The selected consolidated balance sheet data as of December 31, 2006 and 2005, and the selected consolidated statements of operations data for fiscal years ended December 31, 2006 and 2005, the periods from January 1, 2004 to November 8, 2004 and from November 9, 2004 to December 31, 2004 have been derived from our audited consolidated financial statements included elsewhere in this Form 10-K. The selected consolidated balance sheet data as of December 31, 2003 and 2002 and the selected consolidated statements of operations data for the year ended December 31, 2002 have been derived from our audited consolidated financial statements not included in this Annual Report on Form 10-K.

Our consolidated financial statements include allocations of certain Cypress expenses, including centralized legal, tax, treasury, information technology, employee benefits and other Cypress corporate services and infrastructure costs. The expense allocations have been determined on bases that we and Cypress considered to be reasonable reflections of the utilization of services provided or the benefit received by us. The financial information included in this discussion and in our consolidated financial statements may not be indicative of our consolidated financial position, operating results, changes in equity and cash flows in the future, or what they would have been had we been a separate stand-alone entity during the periods presented. See note 3 of the notes to our consolidated financial statements for additional information on our relationship with Cypress.

In 2002, we reported our results of operations on a calendar year-end basis. In fiscal 2003, we began to report our results of operations on the basis of 52 or 53-week periods, ending on the Sunday closest to December 31. Fiscal 2003 ended on December 28, 2003 and included 52 weeks. The combined periods of fiscal 2004 ended on January 2, 2005 and included 53 weeks. Fiscal 2005 ended on January 1, 2006, fiscal 2006 ended on December 31, 2006 and each fiscal year included 52 weeks. Our fiscal quarters end on the Sunday closest to the end of the applicable calendar quarter, except in a 53-week fiscal year in which the additional week falls into the fourth quarter of that fiscal year. For presentation purposes only, the consolidated financial statements and notes refer to the calendar year-end and month-end of each respective period.

On January 10, 2007 we completed the acquisition of PowerLight, a leading global provider of large-scale solar power systems. PowerLight designs, manufactures, markets and sells solar electric power system technology that integrates solar cells and solar panels manufactured by us and other suppliers to convert sunlight to electricity compatible with the utility network. PowerLight also provides solar power systems to end customers on a turn-key, whole-solution basis by developing, engineering, procuring permits and equipment for, managing construction of, offering access to financing for, and providing monitoring, operations and maintenance services for large-scale roof-mounted and ground-mounted solar power applications. PowerLight’s customers include industrial, commercial and public sector entities, investors, value-added resellers, utilities and production home builders. PowerLight’s solar power systems generate electricity over a system design life

 

62


Table of Contents

typically exceeding 25 years. PowerLight’s solar power systems are principally designed to be used in large-scale applications exceeding 300 kilowatts, including the development of solar production home communities. PowerLight has completed or is in the process of completing over 300 projects worldwide, rated in aggregate at over 100 megawatts peak capacity. In the United States, PowerLight typically sells solar power systems rated up to one megawatt of capacity to provide a supplemental, distributed source of electricity for a customer’s facility. In Europe and South Korea, PowerLight’s products and systems are often purchased by third party investors as central station solar power plants, typically rated from one to 20 megawatts, which generate electricity for sale under tariff to regional and public utilities.

The following selected consolidated financial information do not include PowerLight’s statements of operations or balance sheet data.

 

     Successor Company      Predecessor Company  
     Year Ended
December 31,
    Nov. 9
Through
Dec. 31,
2004
     Jan. 1
Through
Nov. 8,
2004
    Year Ended
December 31,
 
(In thousands, except per share data)    2006     2005          2003     2002  

Consolidated Statements of Operations Data

                  

Revenue

   $ 236,510     $ 78,736     $ 4,055      $ 6,830     $ 5,005     $ 4,055  
                                                 

Costs and expenses:

                  

Cost of revenue

     186,042       74,353       6,079        9,498       4,987       3,198  

Research and development

     9,684       6,488       1,417        12,118       9,816       2,532  

Sales, general and administrative

     21,677       10,880       1,111        4,713       3,238       1,396  
                                                 

Total costs and expenses

     217,403       91,721       8,607        26,329       18,041       7,126  
                                                 

Operating income (loss)

     19,107       (12,985 )     (4,552 )      (19,499 )     (13,036 )     (3,071 )

Interest income

     10,086       1,591       3        15       —         —    

Interest expense

     (1,809 )     (3,185 )     (1,072 )      (3,759 )     (1,509 )     (493 )

Other income (expense), net

     1,077       (1,214 )     12        (59 )     —         31  
                                                 

Income (loss) before income tax provision

     28,461       (15,793 )     (5,609 )      (23,302 )     (14,545 )     (3,533 )

Income tax provision

     1,945       50       —          —         —         —    
                                                 

Net income (loss)

   $ 26,516     $ (15,843 )   $ (5,609 )    $ (23,302 )   $ (14,545 )   $ (3,533 )
                                                 

Net income (loss) per share:

                  

Basic(1)

   $ 0.40     $ (0.68 )   $ (2,804.50 )    $ (5.51 )   $ (3.50 )   $ (1.11 )
                                                 

Diluted(1)

   $ 0.37     $ (0.68 )   $ (2,804.50 )    $ (5.51 )   $ (3.50 )   $ (1.11 )
                                                 

Weighted-average shares:

                  

Basic (1)

     65,864       23,306       2        4,230       4,156       3,188  
                                                 

Diluted(1)

     71,087       23,306       2        4,230       4,156       3,188  
                                                 

(1) The basic and diluted net income (loss) per share computation excludes potential shares of common stock issuable upon conversion of convertible preferred stock and exercise of options and warrants to purchase common stock when their effect would be antidilutive. See Note 4 of the notes to our consolidated financial statements for a detailed explanation of the determination of the shares used in computing basic and diluted net loss per share.

 

63


Table of Contents
     Successor Company     Predecessor Company  
     As of December 31,     As of December 31,  
(in thousands)    2006    2005    2004     2003     2002  

Consolidated Balance Sheet Data

                 

Cash and cash equivalents

   $ 165,596    $ 143,592    $ 3,776     $ 5,588     $ 345  

Working capital (deficiency)

     228,269      155,243      (54,314 )         (28,574 )     (3,090 )

Total assets

     576,836      317,654      89,646       30,891       9,254  

Deferred tax liabilities

     46      336      —         —         —    

Notes payable to Cypress, net of current portion

     —        —        21,673       5,312       —    
 

Customer advances, net of current portion

     27,687      28,438      —         —         —    

Convertible preferred stock

     —        —        8,552       9,366       9,366  
 

Total stockholders’ equity (deficit)

     488,771      258,650      (10,664 )     (20,479 )     (6,022 )

ITEM 7: MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The following discussion of our financial condition and results of operations should be read together with the consolidated financial statements and related notes. In our discussion of our fiscal year 2004, we refer to each line item in the statement of operations as “combined” for comparative purposes. These combined amounts represent the sum of the financial data for SunPower Corporation for the period from January 1, 2004 to November 8, 2004, our pre-merger period, and from November 9, 2004 to December 31, 2004, our post-merger period. We are including these combined amounts to improve comparative analysis with other annual periods. These combined amounts are for informational purposes only and do not purport to represent what our financial results would have been in such periods.

General

We design, manufacture, market and sell solar power products, systems and services. Our products are based on our proprietary processes and technologies. We have spent more than 15 years developing high performance solar cells, which are semiconductor devices that directly convert sunlight into electricity. We believe our solar cells have the highest conversion efficiency, a measurement of the amount of sunlight converted by the solar cell into electricity, available for the mass market. We believe our solar cells provide superior performance, including the ability to generate up to 50% more power per unit area, superior aesthetics with our uniformly black surface design and efficient use of silicon compared with conventional solar cells.

We offer solar power products including solar cells, solar panels and inverters which convert sunlight to electricity compatible with the utility network. Our initial solar sales efforts have been focused on residential and commercial applications where the high performance and superior aesthetics of our solar power products provide compelling customer benefits. We sell our solar power products in many countries, principally in regions where government incentives have accelerated solar power adoption. In addition, we offer high performance imaging detectors based on our solar power technology, primarily for medical imaging applications, and infrared detectors for use primarily in computing and mobile phone applications.

On January 10, 2007 we completed the acquisition of PowerLight Corporation (“PowerLight”), a leading global provider of large-scale solar power systems. PowerLight designs, manufactures, markets and sells solar electric power system technology that integrates solar cells and solar panels manufactured by us and other suppliers to convert sunlight to electricity compatible with the utility network. PowerLight also provides solar power systems to end customers on a turn-key, whole-solution basis by developing, engineering, procuring permits and equipment for, managing construction of, offering access to financing for, and providing monitoring, operations and maintenance services for large-scale roof-mounted and ground-mounted solar power applications. PowerLight’s financial results are not included in our results for any periods prior to the acquisition date.

 

64


Table of Contents

Discussions regarding the impact of the PowerLight acquisition on our future financial condition and results of operations are included, where applicable, herein.

In February 2007, we issued $200.0 million in principal amount of our 1.25% senior convertible debentures (“Debentures”). Interest on the Debentures will be payable on February 15 and August 15 of each year, commencing August 15, 2007. The Debentures will mature on February 15, 2027. Holders may require us to repurchase all or a portion of their Debentures on each of February 15, 2012, February 15, 2017 and February 15, 2022, or if we experience certain types of corporate transactions constituting a fundamental change. Any repurchase of the Debentures pursuant to these provisions will be for cash at a price equal to 100% of the principal amount of the Debentures to be repurchased plus accrued and unpaid interest. In addition, we may redeem some or all of the Debentures on or after February 15, 2012 for cash at a redemption price equal to 100% of the principal amount of the Debentures to be redeemed plus accrued and unpaid interest.

Concurrent with the offering of Debentures, we lent 2.9 million shares of our class A common stock, all of which are being borrowed by an affiliate of Lehman Brothers Inc. (“LBIE”), one of the underwriters of the Debentures. We will not receive any proceeds from that offering of class A common stock, but we will receive a nominal lending fee of $0.001 per share for each share of common stock that is loaned pursuant to the share lending agreement.

Overview

SunPower was incorporated in 1985 by Dr. Richard Swanson to develop and commercialize high-efficiency photovoltaic, or solar, cell technology. Our solar cells were initially used in solar concentrator systems, which concentrate sunlight to reflective dish systems. From 1988 to 2000, we focused our efforts on developing our high-efficiency solar cells and marketing our infrared detectors. In 2001, NASA used our solar cells in the Helios solar-powered airplane to achieve a world record powered-flight altitude of 96,863 feet. For the past several years, we have focused our efforts on building commercial manufacturing capacity for our solar cells while continuing to sell our imaging and infrared detectors.

From 2002 until the closing of our initial public offering of 8.8 million shares of class A common stock on November 22, 2005, we financed our operations primarily through sale of equity to and borrowings from Cypress totaling approximately $142.8 million. As of February 23, 2007, Cypress owned all 52,033,287 shares of outstanding SunPower class B common stock, representing approximately 75% of the total outstanding shares of SunPower common stock, or approximately 70% of such shares on a fully diluted basis after taking into account outstanding options, and 96% of the voting power of SunPower’s outstanding capital stock. We received net proceeds from our IPO of approximately $145.6 million. In June 2006, we completed a follow-on public offering of 7.0 million shares of our common stock, at a per share price of $29.50, and received net proceeds of $197.4 million.

In February 2007, we issued $200.0 million in principal amount of 1.25% senior convertible debentures with interest payable on February 15 and August 15 of each year, commencing August 15, 2007. The senior convertible debentures will mature on February 15, 2027. See Note 17 of the notes to our consolidated financial statements.

Excluding PowerLight, our employee base has increased from 66 full-time employees as of December 31, 2002 to 1,572 as of December 31, 2006 with most of the increase coming from hiring at our facility in the Philippines related to our increased manufacturing capacity. We have also increased headcount in research and development as well as sales, general and administrative functions as we prepare for anticipated continuing growth of our business.

We sell our solar power products to system integrators and original equipment manufacturers, or OEMs. Our solar panels are assembled for us by both our Philippines panel manufacturing facility and a third-party

 

65


Table of Contents

subcontractor located in China. System integrators typically design and sell complete systems that include our solar panels along with additional required system components. In North America, our system integrators also incorporate our inverters in their system offerings. Our two largest customers for our solar power products are Conergy and Solon.

In addition, we offer imaging and infrared detectors based on our solar power technology. Our imaging detectors are manufactured for us by Cypress and are processed and tested in our San Jose, California facility. We sell our imaging detectors to OEMs. Our primary customer for our imaging detectors is Plexus, a subcontractor to GE which uses our imaging detectors in its medical imaging products. We offer infrared detectors for use primarily in computing and mobile phone applications. For example, our infrared detectors are used in personal digital assistants to beam information from one device to another.

To date, the majority of our revenue from our solar power products has been generated from two systems integrator customers in Europe. A significant number of the systems designed and manufactured by our customers are then sold to OEMs, who in turn sell the systems to end customers, including to customers outside of Europe. Our international sales accounted for approximately 68%, 70% and 44% of our total revenue in fiscal years 2006, 2005 and combined fiscal 2004, respectively. We anticipate that a significant amount of our total revenue will continue to be generated by sales to customers outside the United States. A significant portion of our sales are denominated in Euros.

Cypress has agreed to provide specified manufacturing and support services such as legal, tax, treasury and employee benefits services to us for a limited period from the date of our initial public offering so long as Cypress owns a majority of the aggregate number of shares of all classes of our common stock.

On January 10, 2007 we completed the acquisition of PowerLight, a leading global provider of large-scale solar power systems. PowerLight designs, manufactures, markets and sells solar electric power system technology that integrates solar cells and solar panels manufactured by us and other suppliers to convert sunlight to electricity compatible with the utility network. PowerLight also provides solar power systems to end customers on a turn-key, whole-solution basis by developing, engineering, procuring permits and equipment for, managing construction of, offering access to financing for, and providing monitoring, operations and maintenance services for large-scale roof-mounted and ground-mounted solar power applications. PowerLight’s customers include industrial, commercial and public sector entities, investors, value-added resellers, utilities and production home builders. PowerLight’s solar power systems generate electricity over a system design life typically exceeding 25 years. PowerLight’s solar power systems are principally designed to be used in large-scale applications exceeding 300 kilowatts, including the development of solar production home communities. PowerLight has completed or is in the process of completing over 300 projects worldwide, rated in aggregate at over 100 megawatts peak capacity. In the United States, PowerLight typically sells solar power systems rated up to one megawatt of capacity to provide a supplemental, distributed source of electricity for a customer’s facility. In Europe and South Korea, PowerLight’s products and systems are often purchased by third party investors as central station solar power plants, typically rated from one to 20 megawatts, which generate electricity for sale under tariff to regional and public utilities.

Where reference to PowerLight historical 2006 financial information is provided, such information is presented as of and for the nine months ended September 30, 2006, the latest available unaudited interim financial information. Selected unaudited financial information for PowerLight is as follows: Revenue of $140.1 million, cost of revenue of $120.6 million, research and development expense of $0.5 million, selling, general and administrative expenses of $15.1 million.

Financial Operations Overview

The following describes certain line items in our statements of operations.

 

66


Table of Contents

Total Revenue

We generate product revenue from sales of our solar cells, solar panels, inverters, imaging detectors and infrared detectors. Excluding PowerLight, solar power products accounted for 94% and 85% of our product revenue in fiscal 2006 and 2005, respectively, and 36% of our combined product revenue in 2004. Detector products and other revenue accounted for 6%, 15% and 64% of product revenue in fiscal 2006, 2005 and combined product revenue in fiscal 2004, respectively. Factors affecting our revenue include unit volumes shipped, average selling prices, product mix and product demand. We have experienced quarter-over-quarter unit volume increases in shipments of our solar power products since their commercial introduction in the fourth quarter of 2004. During this period, we have experienced modest increases in average selling prices for our solar power products primarily due to the strength of end-market demand, coupled with increased raw material prices used in the manufacture of our products. Over the next several years, we expect average selling prices for our solar power products to decline as the market becomes more competitive, as certain products mature and as manufacturers are able to lower their manufacturing costs and pass on some of the savings to their customers. This is similar to our historical experience with our infrared detector products.

Our PowerLight business that was acquired on January 10, 2007 primarily sells its solar systems directly to end customers and to third party investors under engineering, procurement and construction, or EPC, contracts. In the United States where customers utilize rebate programs in connection with projects rated one megawatt or less of capacity, the PowerLight business typically sells solar systems rated up to one megawatt of capacity to provide a supplemental, distributed source of electricity for a customer’s facility. In Europe and South Korea, PowerLight systems are often purchased by third-party investors as central station solar power plants, typically rated from one to 20 megawatts, which generate electricity for sale under tariff to regional and public utilities. Our PowerLight business also sells its solar systems through value-added resellers, or VARs, in the United States, Europe and Asia or under materials-only sales contracts in the United States, Europe and Asia. The balance of our PowerLight revenues are generally derived from sales to new home builders for residential applications, and maintenance revenue.

For 2005 and the nine months ended September 30, 2006, 86% and 73%, respectively, of the total worldwide revenues of PowerLight were from construction contracts. Prior to 2004, PowerLight’s revenues were primarily derived from construction contracts in the United States. For 2005 and the nine months ended September 30, 2006, 8% and 34%, respectively, of the total worldwide revenues of PowerLight were from international contracts. For the same periods, 14% and 27%, respectively, of the total worldwide revenues of PowerLight were from VAR and materials-only sales contracts, with most of these revenues resulting from sales in the United States.

Cost of Revenue

Our cost of revenue consists primarily of silicon ingots and wafers for the production of solar cells, along with other materials such as chemicals and gases that are needed to transform silicon wafers into solar cells. Other factors contributing to cost of revenue include amortization of intangible assets, depreciation, salaries, personnel-related costs, facilities expenses and manufacturing supplies associated with solar cell fabrication. For our solar panels, our cost of revenue includes raw materials such as glass, frame, backing and other materials, as well as the assembly costs we pay to our third-party subcontractor in China. Additionally, we operate a solar panel assembly facility in the Philippines which incurs labor, depreciation, utilities and other occupancy costs. For our detector products, our cost of revenue includes the cost of silicon wafers, which is charged to us by our manufacturing contractor, Cypress, and our packaging and test costs. We expect cost of revenue to increase in absolute dollars as we bring on additional capacity and increase our product volume. We anticipate continued increases in our cost of polysilicon during 2007 which will also contribute to higher cost of revenue. Despite the absolute increase in cost of revenue dollars, we expect our cost of revenue to fluctuate as a percentage of revenue depending on many factors such as capacity utilization, production yields and product sales mix.

On November 9, 2004, Cypress completed a reverse triangular merger with us in which each share of our then outstanding capital stock not owned by Cypress was valued at $3.30 per share and exchanged for an

 

67


Table of Contents

equivalent number of shares of Cypress common stock. This merger effectively gave Cypress 100% ownership of all of our then outstanding shares of capital stock but left our unexercised warrants and options outstanding. As a result of that transaction, we were required to record Cypress’ cost of acquiring us in our financial statements, including its equity investment and pro rata share of our losses by recording intangible assets, including purchased technology, patents, trademarks and distribution agreement. The fair value for these intangibles is being amortized as a component of cost of revenue over two to six years on a straight-line basis. For additional discussion regarding amortization of acquired intangibles, please see Note 2 of the notes to our consolidated financial statements.

Our gross profit each quarter is affected by a number of factors, including average selling prices for our products, our product mix, our actual manufacturing costs, the utilization rate of our wafer fabrication facility and changes in amortization of intangible assets. To date demand for our solar power products has been robust and our production output has increased allowing us to spread a significant amount of our fixed costs over relatively high production volume, thereby reducing our per unit fixed cost. We currently operate four solar cell manufacturing lines with total production capacity of 108 megawatts per year. We purchased a building in the Philippines that is expected to eventually house 10 solar cell production lines with a total factory output capacity of over 300 megawatts per year. As we build additional manufacturing lines or facilities, our fixed costs will increase, and the overall utilization rate of our wafer fabrication facilities could decline, which could negatively impact our gross profit. This decline may continue until a line’s manufacturing output reaches its rated practical capacity.

From time to time, we enter into agreements whereby the selling price for certain of our solar power products is fixed over a defined period. An increase in our manufacturing costs, including raw polysilicon, silicon ingots and wafers, over such a defined period could have a negative impact on our overall gross profit. Our gross profit may also be impacted by fluctuations in manufacturing yield rates certain adjustments for inventory reserves. We expect our gross profit to increase over time as we improve our manufacturing processes and as we grow our business and leverage certain of our fixed costs. An expected increase in gross profit based on manufacturing efficiencies, however, could be partially or completely offset by increased raw material costs or decreased revenue. Our inventory policy is described in more detail under “Critical Accounting Policies and Estimates.”

The cost of revenue of our PowerLight business consists primarily of solar panels, mounting systems, inverters and subcontractor costs. Other factors contributing to cost of revenue include depreciation, salaries, personnel-related costs, royalties, legal costs and manufacturing supplies associated with contracting revenues. Starting in 2005 and continuing throughout 2006, PowerLight has experienced marked increases in its cost of solar panels, which is the single largest cost element in its construction costs. The increased cost of polysilicon has become the most significant factor in the increased cost of solar panels in 2005 and 2006.

Almost all of the construction contracts for our PowerLight business are fixed price contracts. However, PowerLight has in several instances received authorization to bill for additional unexpected project costs due to various reasons. PowerLight also has long term agreements for solar cell and panel purchases with several major solar panel manufacturers, some with liquidated damages and/or take or pay type arrangements. An increase in our PowerLight project costs, including solar panel, inverter, steel and subcontractor costs, over the term of a construction contract could have a negative impact on our overall gross profit. We expect that amortization of PowerLight’s identifiable intangible assets will significantly reduce our gross margin.

Operating Expenses

Our operating expenses include research and development expense and sales, general and administrative expense. Research and development expense consists primarily of salaries and related personnel costs, depreciation and the cost of solar cells and solar panel materials and services used for the development of products, including experiment and testing. We expect our research and development expense to increase in absolute dollars as we continue to develop new processes to further improve the conversion efficiency of our

 

68


Table of Contents

solar cells and reduce their manufacturing cost, and as we develop new products to diversify our product offerings. We expect our research and development expense to decrease as a percentage of revenue over time, assuming our revenue increases as we expect. Research and development expenses are reported net of any grant funding received under contracts with governmental agencies because such contracts are considered collaborative arrangements. Excluding PowerLight, during 2005 we entered into a three-year cost-sharing research and development project with the National Renewable Energy Laboratory to fund the design of our next generation solar panels. Payments received under this contract help offset our research and development expense. This contract is expected to fund approximately $1.0 million per year of our research and development expense through May 2008.

PowerLight’s research and development for solar electric products has been primarily funded by grants from government agencies. These grants typically are structured such that only direct costs and general and administrative expenses that satisfy government accounting regulations are reimbursed, without any additional markup. PowerLight received $0.9 million and $1.5 million in grant funding in 2004 and 2005, respectively, and $1.0 million in grant funding in the first nine months of 2006. In addition, PowerLight’s grant contracts will usually require us to pay to the granting governmental agency certain royalties based on sales of products developed with grant funding. Our PowerLight business has various research and development contracts (in progress and completed) with state agencies in California and New York whereby we are obligated to pay royalties. Royalties paid to governmental agencies will be charged to the cost of goods sold. In the first quarter of 2007, we expect to incur approximately $4.4 million of research and development expense associated with our purchase of PowerLight’s in-process research and development projects that have not achieved technological feasibility and have no anticipated alternative uses as of the acquisition date.

Sales, general and administrative expense for our business including PowerLight consists primarily of salaries and related personnel costs, professional fees, insurance and other selling and marketing expenses. We expect our sales, general and administrative expense to increase in absolute dollars as we expand our sales and marketing efforts, hire additional personnel, improve our information technology infrastructure and expenditures necessary to fund the anticipated growth of our business. We also expect sales, general and administrative expense to increase to support our operations as a public company, including compliance-related costs. However, assuming our revenue increases as we expect, over time we anticipate that our sales, general and administrative expense will decrease as a percentage of revenue.

We anticipate that our stock-based compensation expense will increase markedly as a result of the PowerLight acquisition.

Interest Income

Interest income consisted of interest earned on cash and cash equivalents and short-term investments.

Interest Expense

Historically, interest expense consisted of interest associated with indebtedness to Cypress and the fair value of warrants issued to Cypress which were reflected as interest expense using the effective interest method for financial reporting purposes. Interest expense also included expense related to outstanding advances from customers. See Note 11 of the notes to our consolidated financial statements. On February 2, 2007, we completed a public offering of $200 million in principal amount of 1.25% Senior Convertible Debentures (the “Debentures”). We expect that interest expense on the Debentures will be approximately $0.6 million per quarter assuming that all of the Debentures remain outstanding.

Other Income (Expense), Net

Other income (expense), net consists primarily of gains or losses from foreign exchange, foreign exchange hedging contracts, and interest earned on our cash and investments.

 

69


Table of Contents

Provision for Income Taxes

For financial reporting purposes, income tax expense and deferred income tax balances were calculated as if we were a separate entity and had prepared our own separate tax return. Effective with the closing of our public offering of common stock in June 2006, we are no longer eligible to file consolidated tax returns with Cypress. Deferred tax assets and liabilities are recognized for temporary differences between financial statement and income tax bases of assets and liabilities. Valuation allowances are provided against deferred tax assets when management cannot conclude that it is more likely than not that some portion or the entire deferred tax asset will be realized. Any payments we make to Cypress when we utilize certain tax attributes will be accounted for as an equity transaction with Cypress. See Notes 1, 3 and 8 of the notes to our consolidated financial statements.

As of December 31, 2006, prior to the acquisition of PowerLight, we had federal net operating loss carryforwards of approximately $50.6 million. These federal net operating loss carryforwards expire at various dates from 2011 through 2026. We had California state net operating loss carryforwards of approximately $4.8 million as of December 31, 2006, which expire in 2007 through 2012. We also had research and development credit carryforwards of approximately $2.1 million for both federal and state tax purposes. We have provided a valuation allowance on our deferred tax assets, consisting primarily of net operating loss carryforwards, because of the uncertainty of their realizability. In the event we determine that the realization of these deferred tax assets associated with the Cypress acquisition is more likely than not, the reversal of the related valuation allowance will first reduce goodwill, then intangible assets and lastly as a reduction to the provision for taxes. Due in part to equity financings, we experienced “ownership changes” as defined in Section 382 of the Code. Accordingly, our use of a portion of the net operating loss carryforwards and credit carryforwards is limited by the annual limitations described in Sections 382 and 383 of the Code. Additionally, we do not expect the acquisition of PowerLight to materially affect the amounts of our consolidated net operating loss or tax carryforwards as of the January 10, 2007 acquisition date.

We currently benefit from income tax holiday incentives in the Philippines pursuant to our Philippine subsidiary’s registrations with the Board of Investments and Philippine Economic Zone Authority, which provide that we pay no income tax in the Philippines for four years pursuant to our Board of Investments non-pioneer status and Philippine Economic Zone Authority registrations, and six years pursuant to our Board of Investments pioneer status registration. Our current income tax holidays expire in 2010, and we intend to apply for extensions. However, these tax holidays may or may not be extended. We believe that as our Philippine tax holidays expire, (a) gross income attributable to activities covered by our Philippine Economic Zone Authority registrations will be taxed at a 5% preferential rate, and (b) our Philippine net income attributable to all other activities will be taxed at the statutory Philippine corporate income tax rate of 32%. As of yet, no tax benefit has been realized from the income tax holiday due to operating losses in the Philippines.

Critical Accounting Policies and Estimates

Our discussion and analysis of our financial condition and results of operations are based on our financial statements, which have been prepared in accordance with U.S. generally accepted accounting principles (“GAAP”). The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenue and expenses. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions. Our most critical policies include: (a) revenue recognition, which impacts the recording of revenue; (b) allowance for doubtful accounts, which impacts general and administrative expense; (c) warranty reserves, which impact cost of revenue and gross margin; (d) valuation of inventories, which impacts cost of revenue and gross margin; (e) stock option valuation, which impacts disclosure and cost of revenue and operating expenses; (f) valuation of long-lived assets, which impacts write-offs of goodwill and other intangible assets; (g) valuation of goodwill impairment, which impacts operating expense and net income; and (h) accounting for income taxes which impacts our net income. We also have other key accounting policies that are less subjective, and therefore,

 

70


Table of Contents

judgments in their application would not have a material impact on our reported results of operations. The following is a discussion of our most critical policies related to SunPower as of and for the year ended December 31, 2006, as well as the estimates and judgments involved.

Revenue Recognition

We sell our products to system integrators and OEMs and recognize revenue when persuasive evidence of an arrangement exists, the product has shipped, title and risk of loss has passed to the customer, the sales price is fixed and determinable, collectibility of the resulting receivable is reasonably assured and the rights and risks of ownership have passed to the customer. We do not currently have any significant post-shipment obligations, including installation, training or customer acceptance clauses with any of our customers, which could have an impact on revenue recognition. As such, we record revenue and trade receivables for the selling price when the above conditions are met. Our revenue recognition is consistent across product lines and sales practices are consistent across all geographic locations.

We also enter into development agreements with some of our customers. Development revenue is recognized under the proportionate performance method, with the associated costs included in research and development expense. We estimate the proportionate performance of our development contracts based on an analysis of progress toward completion.

Allowance for Doubtful Accounts

We maintain allowances for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments. We make our estimates of the collectibility of our accounts receivable by analyzing historical bad debts, specific customer creditworthiness and current economic trends. The allowance for doubtful accounts was $557,000 and $317,000 as of December 31, 2006 and 2005, respectively. If the financial condition of our customers were to deteriorate such that their ability to make payments was impaired, additional allowances could be required.

Warranty Reserves

It is customary in our business and industry to warrant or guarantee the performance of our solar panels at certain levels of conversion efficiency for extended periods, often as long as 25 years. It is also customary to warrant or guarantee the functionality of our solar cells and imaging detectors for at least one year. We therefore maintain warranty reserves to cover potential liability that could arise from these guarantees. Our potential liability is generally in the form of product replacement. Our warranty reserves reflect our best estimate of such liabilities and are based on our analysis of product returns, results of industry-standard accelerated testing and various other assumptions that we believe to be reasonable under the circumstances. We have sold solar cells only since late 2004, and accordingly have a limited history upon which to base our estimates of warranty expense. We recognize our warranty reserve as a component of cost of revenue. Our warranty reserve includes specific accruals for known product issues and an accrual for an estimate of incurred but not reported product issues based on historical activity. Due to effective product testing and the short turnaround time between product shipment and the detection and correction of product failures, warranty expenses based on historical activity were not significant as of and for the fiscal years or interim periods presented.

Valuation of Inventory

Inventory is valued at the lower of cost or market. Certain factors could impact the realizable value of our inventory, so we continually evaluate the recoverability based on assumptions about customer demand and market conditions. The evaluation may take into consideration historic usage, expected demand, anticipated sales price, new product development schedules, the effect new products might have on the sale of existing products, product obsolescence, customer concentrations, product merchantability and other factors. The reserve or write-down is equal to the difference between the cost of inventory and the estimated market value based upon

 

71


Table of Contents

assumptions about future demand and market conditions. If actual market conditions are less favorable than those projected by management, additional inventory reserves or write-downs may be required that could negatively impact our gross margin and operating results. If actual market conditions are more favorable, we may have higher gross margin when products that have been previously reserved or written down are eventually sold.

Stock-Based Compensation

Effective January 1, 2006, we adopted the fair value recognition provisions of SFAS No. 123(R), using the modified prospective application transition method, and therefore have not restated prior periods’ results. Under the fair value recognition provisions of SFAS No. 123(R), we recognize stock-based compensation net of an estimated forfeiture rate and only recognize compensation cost for those shares expected to vest over the requisite service period of the award. Prior to the adoption of SFAS No. 123(R), we accounted for share-based payments under APB No. 25 and accordingly, generally recognized compensation expense only when we granted options with a discounted exercise price.

Determining the appropriate fair value model and calculating the fair value of share-based payment awards require the input of highly subjective assumptions, including the expected life of the share-based payment awards and stock price volatility. The assumptions used in calculating the fair value of share-based payment awards represent management’s best estimates, but these estimates involve inherent uncertainties and the application of management judgment. As a result, if factors change and we use different assumptions, our stock-based compensation expense could be materially different in the future. In addition, we are required to estimate the expected forfeiture rate and only recognize expense for those shares expected to vest. If our actual forfeiture rate is materially different from our estimate, the stock-based compensation expense could be significantly different from what we have recorded in the current period. See Note 14 of Notes to Consolidated Financial Statements.

Valuation of Long-Lived Assets

Our long-lived assets include manufacturing equipment and facilities as well as certain intangible assets. Our business requires heavy investment in manufacturing facilities that are technologically advanced but can quickly become significantly under-utilized or rendered obsolete by rapid changes in demand for solar power products produced in those facilities. On November 9, 2004, Cypress completed a reverse triangular merger with us in which each share of our then outstanding capital stock not owned by Cypress was exchanged at a value of $3.30 per share for shares of Cypress common stock having an equivalent aggregate value. This merger effectively gave Cypress 100% ownership of all of our outstanding shares of capital stock but left our unexercised outstanding warrants and options outstanding. As a result of that transaction, we were required to record Cypress’ cost of acquiring us in our financial statement by recording intangible assets including purchased technology, patents, trademarks, distribution agreement and goodwill. We evaluate our long-lived assets, including property, plant and equipment and purchased intangible assets with finite lives, for impairment whenever events or changes in circumstances indicate that the carrying value of such assets may not be recoverable. Since we operate in only one business segment, impairment of long-lived assets is assessed at the enterprise level. Factors considered important that could result in an impairment review include significant underperformance relative to expected historical or projected future operating results, significant changes in the manner of use of acquired assets or the strategy for our business and significant negative industry or economic trends. Impairments are recognized based on the difference between the fair value of the asset and its carrying value, and fair value is generally measured based on discounted cash flow analyses. We recorded a $461,000 impairment charge in fiscal 2005, related to certain equipment when we decommissioned our pilot wafer fab located in Cypress’ Round Rock, Texas facility. If there is a significant decrease in our business or profitability in the future, we may be required to record impairment charges in the future.

Goodwill Impairment

On November 9, 2004, Cypress completed a reverse triangular merger with us in which each share of our then outstanding capital stock not owned by Cypress was valued at $3.30 per share and exchanged for an equivalent number of shares of Cypress common stock. This merger effectively gave Cypress 100% ownership

 

72


Table of Contents

of all of our then outstanding shares of capital stock but left our unexercised outstanding warrants and options outstanding. As a result of that transaction, we were required to record Cypress’ cost of acquiring us, including its equity investment and pro rata share of our losses in our financial statements by recording intangible assets including purchased technology, patents, trademarks, distribution agreement and goodwill. We perform a goodwill impairment test on an annual basis and will perform an assessment between annual tests in certain circumstances. The process of evaluating the potential impairment of goodwill is highly subjective and requires significant judgment at many points during the analysis. In estimating the fair value of our business, we make estimates and judgments about our future cash flows. Our cash flow forecasts are based on assumptions that are consistent with the plans and estimates we use to manage our business.

Accounting for Income Taxes

Our global operations involve manufacturing, research and development and selling activities. Profit from non-U.S. activities is subject to local country taxes but not subject to United States tax until repatriated to the United States. It is our intention to permanently reinvest these earnings outside the United States. We record a valuation allowance to reduce our deferred tax assets to the amount that is more likely than not to be realized. We consider historical levels of income, expectations and risks associated with estimates of future taxable income and ongoing prudent and feasible tax planning strategies in assessing the need for the valuation allowance. Should we determine that we would be able to realize deferred tax assets in the future in excess of the net recorded amount, we would record an adjustment to the deferred tax asset valuation allowance. This adjustment would increase income in the period such determination is made.

The calculation of tax liabilities involves dealing with uncertainties in the application of complex global tax regulations. We recognize potential liabilities for anticipated tax audit issues in the United States and other tax jurisdictions based on our estimate of whether, and the extent to which, additional taxes will be due. If payment of these amounts ultimately proves to be unnecessary, the reversal of the liabilities would result in tax benefits being recognized in the period when we determine the liabilities are no longer necessary. If the estimate of tax liabilities proves to be less than the ultimate tax assessment, a further charge to expense would result.

Certain Effects of the Merger on SunPower’s Financial Condition and Results of Operations

We have historically operated within only one reportable segment. As a result of the completion of our acquisition of PowerLight, we are presently evaluating whether or not the acquisition of the PowerLight business will result in our being required to report its financial results in more than one reportable segment.

The PowerLight acquisition is being accounted for under the purchase method of accounting, in accordance with the Statement of Financial Accounting Standards No. 141, Business Combinations. Under the purchase method of accounting, PowerLight’s results of operations and the impact of the completion of the acquisition will be reflected in our financial statements on a prospective basis. The following table shows our preliminary estimate of fiscal year 2007 to 2011 acquisition related stock-based compensation, amortization of intangible assets and in-process research and development expenses:

 

(in thousands)    2007    2008    2009          2010    2011

Stock-based compensation

   $ 36,773    $ 36,863    $ 5,538         $ 5,066    $ 1,432

Amortization of intangible assets

     25,954      15,800      15,800           15,800      8,305

In-process research and development

     4,447      —        —             —        —  
                                       

Total

   $ 67,174    $ 52,663    $ 21,338         $ 20,866    $ 9,737
                                       

We have not completed our final calculation of the purchase price allocation and therefore these amounts remain subject to change based on a final determination of the closing balance sheet of PowerLight as of January 10, 2007. We anticipate that the estimated charges enumerated in the table above will be included in its future results of operations presented on a basis in accordance with generally accepted accounting principles (“GAAP”). In addition, we may incur certain other acquisition-related charges and/or restructuring expenses in the future that are not reflected in the table above.

 

73


Table of Contents

New Critical Accounting Policies Resulting from Our Acquisition of PowerLight

Our acquisition of PowerLight represents our entry into a new line of business with different accounting policies. We are currently determining our accounting policies for the combined company and will report on any new critical accounting policies on our Quarterly Report on Form 10-Q for the first quarter of 2007. We expect that we will adopt new critical accounting policies regarding revenue recognition for PowerLight construction contracts and estimating the percentage of completion of such contracts, among other matters.

Results of Operations

PowerLight was a significant customer in 2006. Our historical results of operations do not reflect the financial results of PowerLight for any period prior to the PowerLight acquisition on January 10, 2007. Our results of operations for the first quarter of 2007 will include PowerLight results for the period subsequent to January 10, 2007. In each succeeding quarter thereafter, PowerLight’s results for the full quarter will be included in our results of operations. We expect that the results of operations of the PowerLight business will be material to the overall results of the combined company in future periods and, accordingly, our historical financial results, including those for 2006, are not expected to be indicative of our future results. The following table sets forth the percentage relationship of certain items to the Company’s revenue during the periods shown:

Revenue

Revenue and the year-over-year change were as follows:

 

     Successor Company          Predecessor
Company
        

2005 vs.
Combined
2004
Change

 
     Year Ended
December 31,
   Nov. 9
Through
Dec. 31, 2004
 
         Jan. 1
Through
Nov. 8, 2004
   2006 vs.
2005
Change
   
(dollars in thousands)    2006    2005                 

Revenue

   $ 236,510    $ 78,736    $ 4,055          $ 6,830    200 %   623 %

We generate product revenue from sales of our solar cells, solar panels, inverters, imaging detectors and infrared detectors. Solar power products accounted for 94% of our revenue in 2006 compared with 85% in 2005. Imaging products and other revenue accounted for 6% of our revenue in 2006 compared with 15% in 2005. International sales accounted for approximately 68% and 70% of our total revenue for 2006 and 2005, respectively, and we expect international sales to remain a significant portion of overall sales for the foreseeable future. PowerLight had revenue of $140.1 million in the nine months ended September 30, 2006, and PowerLight’s revenue continued to increase sequentially through the end of 2006. Accordingly, we will experience a significant increase in revenue when PowerLight revenue is included in our revenue beginning in the first quarter of 2007. Our PowerLight revenue will be largely dependent on the status of large construction projects, and accordingly may fluctuate from period to period.

During the years ended December 31, 2006 and 2005, our revenues were $236.5 million and $78.7 million, respectively, which represent an increase of 200%. Our 2005 revenue increased 623% compared to our combined revenue in 2004 of $10.9 million. These significant increases in our revenue are primarily due to strong demand for and commercial introduction of our solar cells and solar panels which began commercial production in late 2004. Revenue from the sale of our solar cells and panels represented 94% of revenue in 2006 compared to 85% in 2005 and 36% of total combined revenue in 2004, driven by continued growth in demand for solar applications. Sales of our detector products represented 6%, 15% and 64% of total revenue in 2006, 2006 and combined 2004, respectively. As summarized in the table below, sales of solar products to PowerLight, Conergy and Solon collectively accounted for a significant portion of our revenues in each of the years in the three-year period ended December 31, 2006. Sales to PowerLight will not recur in future periods due to our acquisition of PowerLight. We will recognize revenue on solar panels supplied to our PowerLight business upon satisfaction of the criteria for that business to recognize revenue for the construction projects in which it uses our panels.

 

74


Table of Contents

The marked revenue increases during each of 2005 and 2006 resulted from continued increases in unit production and unit shipments of both solar cells and solar panels as we have continued to expand our solar manufacturing capacity. During the first nine months of 2005, we had one solar cell manufacturing line in operation with an approximate annual production capacity of 25 megawatts. Since then, we added a second 25 megawatt line during the fourth quarter of 2005 and a third 25 megawatt production line began operations during the first quarter of 2006 and a fourth line with a rated capacity of 33 megawatts began production in the fourth quarter of 2006. We expect to commence production in our 5th, 6th and 7th solar cell lines in the second half of 2007. Each of these lines are expected to have a rated capacity of 35 megawatts per year.

During 2005 our selling prices of solar products was relatively stable and in 2006 we have experienced a slight increase in average selling prices for our solar products primarily due to the strength of end-market demand. However, we expect average selling prices for our solar power products to decline over time as the market becomes more competitive, as new products are introduced and as manufacturers are able to lower their manufacturing costs and pass on some of the savings to their customers, similar to our experience historically in our imaging products.

We have six customers that each accounted for more than 10 percent of our total revenue in one or more of the years ended December 31, 2006 and 2005, and for the periods from November 9, 2004 through December 31 2004 and for the period from January 1, 2004 through November 8, 2004, as follows:

 

     Successor Company     Predecessor
Company
 
     Year Ended
December 31,
    Nov. 9
Through
  Dec. 31, 2004  
    Jan. 1
Through
Nov. 8, 2004
 
     2006     2005      

Significant customers:

             

Conergy AG

   25 %   45 %   19 %   *  

Solon AG

   24 %   16 %   50 %   *  

PowerLight Corporation**

   16 %   *     *     *  

General Electric Company***

   *     10 %   *     *  

Integration Associates

   *     *     *     44 %

Lite On Technology Corp.

   *     *     *     14 %

* denotes less than 10% during the period
** acquired by us on January 10, 2007
*** includes its subcontracting partner, Plexus Corp.

Cost of Revenue

Cost of revenue as a percentage of revenue and the year-over-year change were as follows:

 

    Successor Company     Predecessor
Company
         

2005 vs.
Combined
2004
Change

 
    Year Ended
December 31,
    Nov. 9
Through
Dec. 31, 2004
    Jan. 1
Through
Nov. 8, 2004
    2006 vs.
2005
Change
   
(dollars in thousands)   2006     2005          

Cost of revenue

  $ 186,042     $ 74,353     $ 6,079     $ 9,498     150 %   377 %

As a percentage of revenue

    79 %     94 %     150 %     139 %      

Gross margin percentage

    21 %     6 %     (50 )%     (39 )%      

During 2006, 2005 and combined 2004, our cost of revenue were $186.0 million, $74.4 million, and $15.6 million, respectively. The marked annual increases in our cost of revenues resulted from increased costs in all spending categories relating to operating more production lines and producing and selling substantially higher unit volumes of solar products. As a percentage of sales, our cost of revenues has continued to decline due to economies of scale, improved yields and declining fixed costs per unit associated with markedly higher

 

75


Table of Contents

production volume in 2006 compared to 2005 and also in 2005 compared to 2004 combined, although our raw materials costs have continued to increase. During the second half of 2006 we increased our estimated warranty reserve provision rates based on results of our recent testing that simulates adverse environmental conditions and potential failure rates our solar panels could experience during their 25-year warranty period. Warranty charges were $3.2 million, $0.4 million and $0.2 million during 2006, 2005 and combined 2004. Amortization of intangible assets was $4.7 million in both 2006 and 2005 and $0.6 million combined in 2004, representing amortization of purchased technology, patents, trademarks and other intangible assets. We expect amortization of intangible assets from our November 9, 2004 merger with Cypress will be approximately $1.2 million per quarter through 2007 and diminish thereafter through 2010.

Our gross margins were 21%, 6%, (43%) during 2006, 2005 and combined 2004. The improvement in gross margin during 2006 compared to 2005 and 2005 compared to 2004 combined, is reflective of improved manufacturing economies of scale associated with markedly higher production volume and improved yields, offset partially by higher warranty and material costs, particularly costs of silicon ingots and wafers. The negative gross margin in 2004 was primarily due to increased start-up and pre-operating costs associated with our first 25-megawatts per year production line in the Philippines, which went into commercial production in late 2004. The improvement in gross margin in 2006 and 2005 is attributed to higher solar product revenue, improved absorption of our fixed costs from higher production volume and improvement in manufacturing yields.

In 2007, our gross margin will be impacted by our acquisition of PowerLight. Our gross margin is likely to fluctuate in the future depending on unit demand, change in the average selling prices of our products, the mix of products that we sell, our actual manufacturing costs, our factory performance particularly with respect to volume and yields and changes in amortization of intangible assets. We may also be faced with inventory write-offs or write-downs depending on current or projected demand for our products. Our margins will also be impacted by our ability to ramp new production lines quickly and by fluctuations in units produced due to shortages of raw materials or other factors.

Our gross profit from the PowerLight business each quarter will be affected by a number of factors, including the types of projects we are working on and their various stages of completion, the gross margins estimated for those projects in progress, and our actual project department overhead costs. Generally, revenues from materials-only sales contracts and sales to value-added resellers generate higher gross profits for the PowerLight business than sales under construction contracts. We expect our cost of PowerLight revenue to fluctuate as a percentage of revenue depending on many factors such as the cost of solar panels, the cost of inverters, subcontractor costs, and other project related costs. Our cost of revenue for the PowerLight business will also fluctuate from period to period due to the mix of projects completed and recognized as revenue, in particular between large projects and value added reseller projects that may or may not include solar panels.

In 2007, we will also incur significant amortization of identifiable intangible assets in cost of revenue relating to our acquisition of PowerLight.

We expect that our overall cost of revenue will increase substantially in absolute dollars and as a percentage of revenues as a result of the PowerLight acquisition. Our ultimate gross margin on sales of solar panels through PowerLight may increase as compared to our gross margin on sales to PowerLight as an independent company, but our recognition of this benefit will be delayed until the satisfaction of revenue recognition criteria for PowerLight’s construction projects.

Research and Development Expense

 

    Successor Company     Predecessor
Company
         

2005 vs.
Combined
2004
Change

 
    Year Ended
December 31,
    Nov. 9
Through
Dec. 31, 2004
    Jan. 1
Through
Nov. 8, 2004
    2006 vs.
2005
Change
   
(dollars in thousands)     2006       2005          

Research & development expense

  $ 9,684     $ 6,488     $ 1,417     $ 12,118     49 %   (52 )%

As a percentage of revenue

    4 %     8 %     35 %     177 %      

 

76


Table of Contents

During 2006, 2005 and combined 2004, our research and development expenses were $9.7 million, $6.5 million, and $13.5 million, respectively. Our research and development expense has steadily decreased as a percentage of revenues as a result of the rapid increase in our revenue. The increase in research and development spending in 2006 compared to 2005 resulted primarily from increases in: (i) salaries and benefits costs as a result of increased headcount; (ii) stock-based compensation expense resulting from the Company’s adoption of SFAS No. 123(R) in 2006; and (iii) additional material and equipment costs incurred for the development of our next generation of more efficient solar cells and thinner polysilicon wafers for solar cell manufacturing, as well as development of new processes to automate solar panel assembly operations. These increases were partially offset by a decrease in consulting service fees as well as by cost reimbursements received from the National Renewable Energy Laboratory (“NREL”) to fund a portion of the design of our next generation solar panels. Additionally, during 2005, we recognized a $0.5 million impairment charge related to certain equipment when we decommissioned our pilot wafer lab located in Cypress’ Round Rock, Texas facility.

Research and development expense decreased from $13.5 million in 2004 combined to $6.5 million in 2005, a 52% decrease. In 2004 combined, we incurred $1.9 million in process development and start-up costs associated with qualifying our first 25 megawatts per year production line in the Philippines that caused us to experience higher research and development expense. In addition, the $4.6 million in operating expenses associated with running our pre-production pilot wafer fabrication line were also recognized as research and development expenses in 2004 combined. A significant portion of these costs was recognized as cost of revenue starting in late 2004 as our first production line went into commercial operations and we started selling solar cells and solar panels.

We expect our research and development expense to increase in absolute dollars as we continue to develop new processes to further improve the conversion efficiency of our solar cells and reduce their manufacturing cost, and as we develop new products to diversify our product offerings. We expect our research and development expenses to increase in absolute dollars as a result of the PowerLight acquisition. Research and development expenses as a percentage of revenue are expected to decrease slightly in the short term, however, because a significant portion of PowerLight’s research and development expenses have historically been offset by government funding. In addition, we expect to incur a $4.4 million charge related to in-process research and development in the first quarter of 2007 as a result of our acquisition of PowerLight.

Sales, General and Administrative

 

     Successor Company     Predecessor
Company
         

2005 vs.
Combined
2004
Change

 
     Year Ended
December 31,
    Nov. 9
Through
Dec. 31, 2004
    Jan. 1
Through
Nov. 8, 2004
    2006 vs.
2005
Change
   
(dollars in thousands)    2006     2005          

Sales, general & administrative

   $ 21,677     $ 10,880     $ 1,111     $ 4,713     99 %   87 %

As a percentage of revenue

     9 %     14 %     27 %         69 %      

During 2006, 2005 and combined 2004, our sales, general and administrative expenses were $21.7 million, $10.9 million and $5.8 million, respectively. The increase in our sales, general and administrative expenses in 2006 compared to 2005 is a result of higher spending to support the growth of our business, particularly increased headcount and payroll costs in all areas of sales, marketing, finance and information technology. In addition, the 2006 periods include stock-based compensation expense resulting from the adoption of SFAS No. 123(R). Accounting and legal fees have increased substantially in 2006 mainly due to compliance-related costs of having publicly traded common stock since November 2005, including Sarbanes-Oxley compliance costs. Also in 2006 our sales, general and administrative expenses include increased legal costs incurred in relation to due diligence activities and developing contracts and agreements. During 2006 we have also continued to increase headcount and sales and marketing spending to expand our North America sales channel initiative. As a percentage of revenue, sales, general and administrative expenses decreased from 14% in 2005 to 9% in 2006 because these expenses increased at a substantially lower rate than the rate of growth in our revenues.

 

77


Table of Contents

Sales, general and administrative expense increased from $5.8 million in 2004 combined to $10.9 million in 2005, an 87% increase. The increase in expenses during 2005 was primarily due to higher salary and other compensation, including stock-based compensation, charges related to growth in headcount in both sales and administrative functions. In the future, we anticipate that sales, general and administrative will increase in absolute dollars, but will decrease as a percentage of sales, assuming our revenue grows as we expect. We expect that our selling, general and administrative expenses will increase significantly in absolute dollars and as a percentage of revenues as a result of the PowerLight acquisition and the related integration costs.

Interest and Other Income (Expense), Net

 

     Successor Company           Predecessor
Company
         

2005 vs.
Combined
2004
Change

 
     Year Ended
December 31,
    Nov. 9
Through
Dec. 31, 2004
          Jan. 1
Through
Nov. 8,
2004
    2006 vs.
2005
Change
   
(dollars in thousands)    2006     2005             

Interest income

   $ 10,086     $ 1,591     $ 3          $ 15     534 %   8,379 %

As a percentage of revenue

     4 %     2 %     0 %          0 %    

Interest expense

   $ (1,809 )   $ (3,185 )   $ (1,072 )        $ (3,759 )   (43 )%   (34 )%

As a percentage of revenue

     (1 )%     (4 )%     (26 )%          (55 )%    

Other income (expense), net

   $ 1,077     $ (1,214 )   $ 12          $ (59 )   (189 )%   2,483 %

As a percentage of revenue

     0 %     (2 )%     0 %          (1 )%    

During 2006, our net interest income represents primarily interest income earned on our cash equivalents and investments and interest expense related to customer advance payments. During 2005 and combined 2004, net interest expense represents primarily interest expense on borrowings and from warrants held by Cypress. Other income and expense for all periods primarily represents gains and losses from foreign currency transactions.

Interest expense. Interest expense decreased from $4.8 million in 2004 combined to $3.2 million in 2005. Interest expense attributed to debt we owed to Cypress was $2.9 million and $1.9 million in 2004 and 2005, respectively. Our borrowings during these time periods were to fund capital expenditures for our manufacturing capacity expansion. We expect that interest expense on the Debentures will be approximately $0.6 million per quarter beginning in the first quarter of 2007, assuming that all of the Debentures remain outstanding.

Income Taxes

 

     Successor Company          Predecessor
Company
        

2005 vs.
Combined
2004
Change

     Year Ended
December 31,
    Nov. 9
Through
Dec. 31, 2004
         Jan. 1
Through
Nov. 8, 2004
   2006 vs.
2005
Change
   
(dollars in thousands)    2006     2005               

Income tax provision

   $ 1,945     $ 50     $ —           $ —      3,790 %   n.a.

As a percentage of revenue

     1 %     0 %     n.a.           n.a.     

In 2006, our income tax expense was provided primarily for foreign income taxes in certain jurisdictions where our operations are profitable. Since the completion of our follow-on public offering of common stock in June 2006, we are no longer considered to be a member of Cypress’ consolidated group for federal income tax purposes. Accordingly, in connection with our tax sharing agreement with Cypress we will be required to pay Cypress for federal income tax credit or net operating loss carryforwards generated prior to de-consolidation utilized in our federal tax returns in subsequent periods. In the event we determine that the realization of these deferred tax assets associated with the Cypress acquisition is more likely than not, the reversal of the related valuation allowance will first reduce goodwill, then intangible assets and lastly as a reduction to the provision for taxes.

 

78


Table of Contents

For financial reporting purposes, income tax expense and deferred income tax balances were calculated as if we were a separate entity and had prepared our own separate tax return. Deferred tax assets and liabilities are recognized for temporary differences between financial statement and income tax bases of assets and liabilities. Valuation allowances are provided against deferred tax assets when management cannot conclude that it is more likely than not that all or a portion of our deferred tax assets will be realized.

As of December 31, 2006, we had federal net operating loss carryforwards of approximately $50.6 million. These federal net operating loss carryforwards expire at various dates from 2011 through 2025, if not utilized. We also had California state net operating loss carryforwards of approximately $4.8 million as of December 31, 2006.

During 2005 our income tax provision related to taxes in foreign jurisdictions where we were profitable for tax purposes.

Pre- and Post-Merger Periods in 2004

On November 9, 2004, Cypress completed a reverse triangular merger with us, effectively giving Cypress 100% ownership of all our then outstanding shares of capital stock but leaving our unexercised warrants and options outstanding. This transaction resulted in the “push down” of the effect of the acquisition of SunPower by Cypress and created a new basis of accounting which resulted in a pre- and post-merger periods in our 2004 fiscal year. The period from January 1, 2004 to November 8, 2004 represents our pre-merger period, while the period from November 9, 2004 to December 31, 2004, represents our post-merger period.

Total revenue. Total revenue for our pre-merger period was $6.8 million primarily from sales of our detector products driven by continued demand in infrared detection applications. Total revenue for our post-merger period was $4.1 million with continuing sales from our detector product and a significant contribution from our initial sales of solar products which commenced commercial production in late 2004.

Cost of revenue. Cost of revenue for our pre-merger period was $9.5 million, comprised of manufacturing costs related to our sale of detector products as well as pre-operating costs related to our first 25-megawatts per year production line in the Philippines, comprised primarily of the cost of silicon ingots and wafers. Cost of revenue for our post-merger period was $6.1 million, comprised of manufacturing cost related to our sale of detector products as well as manufacturing cost related to our initial sales of solar products, which commenced commercial operations in late 2004, comprised primarily of the cost of silicon ingots, wafers, utilities and maintenance expenses. Also contributing to cost of revenue was amortization of intangibles which was zero dollars in our pre-merger period and $0.6 million in our post-merger period as we recorded the intangible assets from the merger transaction with Cypress. The amortization expense represented amortization of purchased technology, patents, trademark and other.

Gross margin was negative 39% for our pre-merger period and negative 50% for our post-merger period. Both periods were negatively impacted by pre-operating and production ramp costs related to our first 25-megawatts per year production line in the Philippines which went into commercial production late 2004. The post-merger period was impacted by our initial amortization of intangible assets of $0.6 million.

Research and development. Research and development expense for our pre-merger period was $12.1 million or 177% of total revenue, while research and development expense for our post-merger period was $1.4 million or 35% of total revenue. The pre-merger period expense was primarily due to significant process development spending for the commercialization and mass production of our A-300 solar cell product, including the operation of a pilot wafer fabrication line in Cypress’ Round Rock, Texas facility. Expenses during the pre-merger period also included start-up costs related to the qualification of our first 25-megawatts per year production line in the Philippines which went into commercial production in late 2004. Spending in the pre-merger period included the cost of silicon ingots, wafers, maintenance and third-party research and development services. Research and development for our post-merger period decreased to 35% of revenue primarily due to increase in revenue and

 

79


Table of Contents

the recognition of most of the costs associated with qualification of our A-300 solar cell product as cost of revenue. Stock-based compensation charges included in research and development expense was $23,000 and $293,000 in our pre- and post-merger periods, respectively.

Selling, general and administrative. Selling, general and administrative expense for our pre-merger period was $4.7 million or 69% of total revenue, and was $1.1 million or 27% of total revenue for our post-merger period. Spending for both pre and post-merger periods was primarily due to growth in headcount in both the sales and administrative organizations as we organized these functions to support our growth. Outside services and consulting costs, including legal and accounting fees, also contributed to the increased expense. The decrease in expenses as a percentage of revenue in our post-merger period was primarily due to growth in revenue primarily due to our initial sales of solar products that went into commercial production in late 2004. Stock-based compensation charges included in sales, general and administrative expense was $7,000 and $261,000 in our pre- and post-merger periods, respectively.

Interest income. Interest income represents interest earned on cash and cash equivalents and short-term investments,

Interest expense. Interest expense for our pre-merger period was $3.8 million and was comprised of $2.4 million of interest attributable to debt we owed to Cypress and $1.4 million attributed to the amortization related to the discount on debt we owed Cypress. Interest expense for our post-merger period was $1.1 million and was comprised of $0.6 million attributable to debt we owed to Cypress and $0.5 million attributed to the amortization related to the discount on debt we owed Cypress.

Other income (expense), net. Other income (expense), net, was insignificant for both the pre- and post-merger periods.

Liquidity and Capital Resources

A summary of the sources and uses of cash and cash equivalents is as follows:

 

     Successor Company     Predecessor
Company
 
     Year Ended
December 31,
    Nov. 9
Through
Dec. 31, 2004
    Jan. 1
Through
Nov. 8, 2004
 
(in thousands)    2006     2005      

Net cash provided by (used in) operating activities

   $ (37,951 )   $ 17,771     $ 400     $ (14,021 )

Net cash used in investing activities

     (141,345 )     (70,365 )     (9,691 )     (17,231 )

Net cash provided by financing activities

     201,300       192,410       8,902       29,829  
                                

Net increase (decrease) in cash & cash equivalents

   $ 22,004     $ 139,816     $ (389 )       $ (1,423 )
                                

In our discussion of fiscal 2004, we refer to certain sources and uses of cash as “combined” for comparative purposes. These combined amounts represent the sum of the financial data for SunPower “Predecessor Company” for the period from January 1, 2004 to November 8, 2004, our pre-merger period, and for SunPower “Successor Company” for the period from November 9, 2004 to December 31, 2004, our post-merger period. We are including these combined amounts to improve the comparative analysis versus the prior period, which included a full fiscal year. These combined amounts are included for informational purposes. PowerLight’s liquidity and capital resources are not included herein for any periods prior to the acquisition of PowerLight on January 10, 2007.

From 2002 until the closing of our initial public offering of 8.8 million shares of class A common stock on November 22, 2005, we financed our operations primarily through sale of equity to and borrowings from Cypress totaling approximately $142.8 million. We received net proceeds from our IPO of approximately $145.6 million. Additionally, we received net proceeds of $197.4 million from our follow-on offering in June 2006. As of December 31, 2006, we had approximately $165.6 million in cash and cash equivalents.

 

80


Table of Contents

Operating Activities

Net cash used in operating activities was $38.0 million in 2006, which primarily represents our net income of $26.5 million, offset by $77.4 million of advance payments to raw material suppliers. The net impact of all other sources and uses of 2006 cash flows from operations was a net increase of $12.9 million comprised of non-cash charges for depreciation, amortization and stock-based compensation and changes in operating assets and liabilities.

Net cash generated from operating activities was $17.8 million in 2005, which reflects our net loss for the year of $15.8 million, which was primarily offset by customer advances of $37.4 million to fund expansion of our manufacturing capacity. In April 2005, we entered into an agreement with one of our customers to supply solar cells. As part of this agreement, the customer agreed to pre-fund the expansion of our manufacturing capacity to support this customer’s solar cell product demand. Beginning January 1, 2006, we began paying interest on the unpaid balance of this customer advance. We may repay all or any portion of the unpaid principal and related interest on the advances at any time without penalty through December 31, 2010. As of December 31, 2005, we had received net advances of $37.4 million from two customers.

Net cash used in operating activities was $13.6 million combined in fiscal 2004, reflecting our net loss of $28.9 million. We generated operating cash from increases in accounts payable to suppliers and to Cypress that partially offset our net loss in 2004. Our combined accounts payables to suppliers and Cypress increased a total of $13.9 million combined in fiscal 2004.

Investing Activities

Net cash used in investing activities was $141.3 million in 2006, primarily comprised of (i) $108.3 million of capital expenditures, primarily relating to manufacturing property, plant and equipment in the Philippines; (ii) $16.5 million of purchases of short-term marketable investment securities; (iii) $10.0 million loaned to PowerLight Corporation, which we subsequently acquired on January 10, 2007 and (iv) $5.0 million investment in a joint venture to manufacture mono-crystalline silicon ingots (the Woongjin Energy joint venture—see Note 9 of the notes to our consolidated financial statements).

Net cash used in investing activities was $70.4 million in 2005 and $26.9 million combined in fiscal 2004, substantially all of which represented expenditures for manufacturing facilities and equipment. Capital equipment purchased in 2004 and 2005 was primarily for our manufacturing facility in the Philippines, equipment for our first 25 megawatts per year production line and for our second and third 25-megawatts per year production lines. We expect capital expenditures of approximately $170 million to $190 million in 2007 as we continue to increase our manufacturing capacity.

Financing Activities

Net cash provided by financing activities was $201.3 million in 2006 comprised of $197.4 million net proceeds from our follow-on public offering of common stock in June 2006 and $3.9 million of proceeds from exercises of employee stock options.

Net cash provided by financing activities was $192.4 million in 2005 and $38.7 million combined in fiscal 2004. During 2005 we raised $46.6 million of equity and debt financing from Cypress and we raised $145.6 million of net proceeds from the initial public offering of 8.8 million shares of our Series A common stock in November 2005. All cash provided by financing activities during 2004 came from our parent company, Cypress, in the form of either equity investments or loans. Cumulatively, we raised approximately $142.8 million through the issuance of securities to Cypress. We currently have no outstanding debt obligations to Cypress apart from trade payables.

In December 2005 we entered into a $25.0 million three-year revolving credit facility (the “Facility”) with affiliates of Credit Suisse First Boston and Lehman Brothers. The Facility is collateralized by substantially all of our assets, including the stock of our foreign subsidiaries. Borrowings under the Facility are conditioned upon customary conditions as well as (1) with respect to the first $10.0 million drawn on the facility, maintenance of cash collateral to the extent of outstanding borrowings (excluding amounts borrowed), and (2) with respect to the

 

81


Table of Contents

remaining $15.0 million of the Facility, satisfaction of a coverage test which is based on the ratio of our cash flow to capital expenditures. The Facility contains customary covenants and defaults including limitations on dividends, incurrence of indebtedness and liens, and mergers and acquisitions. The Facility bears interest at a rate of the greater of the prime rate or federal funds rate for US dollar draws, or the LIBOR plus 1% for Euro dollar draws on the first $10.0 million of borrowings and the greater of the prime rate plus 2% or federal funds rate plus 2% for US dollar draws, or LIBOR plus 3% for Euro dollar draws on any borrowings over $10.0 million. The interest rate for Euro dollar borrowings would have been 6.3% at December 31, 2006 on the first $10.0 million of borrowings and 8.3% at December 31, 2006 on any borrowings over $10.0 million. The interest rate U.S. dollar borrowings would have been 8.3% at December 31, 2005 on the first $10.0 million of borrowings and 10.3% at December 31, 2005 on any borrowings over $10.0 million. To date there have been no borrowings under the Facility.

In conjunction with the acquisition of PowerLight, a privately-held leading provider of large-scale solar power systems for commercial, government and utility customers worldwide, we entered into a commitment letter with Cypress during the fourth quarter of fiscal 2006 under which Cypress agreed to lend us up to $130 million in cash in order to facilitate the financing of acquisitions or working capital requirements. In February 2007, the commitment letter was terminated. No borrowings were utilized and no borrowings were outstanding at termination date.

We believe that our current cash and cash equivalents, proceeds from our $200.0 million convertible debenture offering and funds available from the Facility will be sufficient to meet our working capital and capital expenditure commitments for at least the next 12 months. However, if our financial results or operating plans change from our current assumptions, we may not have sufficient resources to support our business plan. If our capital resources are insufficient to satisfy our liquidity requirements, we may seek to sell additional equity securities or debt securities or obtain other debt financing. The sale of additional equity securities or convertible debt securities would result in additional dilution to our stockholders. Additional debt would result in increased expenses and would require us to abide by covenants under the Facility or other debt agreements that would restrict our operations. Financing arrangements may not be available to us, or may not be available in amounts or on terms acceptable to us.

We expect to experience growth in our operating expenses, including our research and development, sales and marketing and general and administrative expenses, for the foreseeable future to execute our business strategy. We may also be required to purchase polysilicon in advance to secure our wafer supplies. We intend to fund these activities with existing cash and cash equivalents, cash generated from operations and if necessary, borrowings under our $25.0 million revolving credit facility. These anticipated increases in operating expenses may not result in an increase in our revenue and our anticipated revenue may not be sufficient to support these increased expenditures. We anticipate that operating expenses, working capital and capital expenditures will constitute a significant use of our cash resources.

In January 2007, pursuant to the terms of the acquisition of PowerLight, all of the outstanding shares of PowerLight, and a portion of each vested option to purchase shares of PowerLight, were cancelled, and all of the outstanding options to purchase shares of PowerLight (other than the portion of each vested option that was cancelled) were assumed by the Company in exchange for aggregate consideration of: (i) approximately $120.7 million in cash plus (ii) a total of 5,708,723 shares of class A common stock, inclusive of: (a) 1,601,839 shares of class A common stock which may be issued upon the exercise of assumed vested and unvested PowerLight stock options, and (b) 1,675,881 shares of class A common stock issued to certain employees of the PowerLight business in connection with the acquisition, which shares are subject to certain transfer restrictions and a repurchase option of the Company, both of which lapse over a two-year period under the terms of equity restriction agreements with employees of the PowerLight business.

In February 2007, we issued $200.0 million in principal amount of its 1.25% senior convertible debentures. Interest on the Debentures will be payable on February 15 and August 15 of each year, commencing August 15, 2007. The Debentures will mature on February 15, 2027. Holders may require us to repurchase all or a portion of their Debentures on each of February 15, 2012, February 15, 2017 and February 15, 2022, or if the Company

 

82


Table of Contents

experiences certain types of corporate transactions constituting a fundamental change. Any repurchase of the Debentures pursuant to these provisions will be for cash at a price equal to 100% of the principal amount of the Debentures to be repurchased plus accrued and unpaid interest. In addition, we may redeem some or all of the Debentures on or after February 15, 2012 for cash at a redemption price equal to 100% of the principal amount of the Debentures to be redeemed plus accrued and unpaid interest.

The following summarizes our contractual obligations at December 31, 2006:

 

     Payments Due by Period
(in thousands)    Total    2007    2008 - 2009    2010 - 2011    Beyond 2011

Obligation to Cypress

   $ 2,909    $ 2,909    $ —      $ —      $ —  

Customer advances

     39,991      12,304      19,291      8,396      —  

Interest on customer advances

     3,887      1,674      1,954      259      —  

Lease commitments

     9,898      1,679      3,348      2,465      2,406

Non-cancelable purchase orders

     71,172      71,172      —        —        —  

Purchase commitments under agreements

     717,582      38,550      233,400      295,791      149,841
                                  

Total

   $ 845,439    $ 128,288    $ 257,993    $ 306,911    $ 152,247
                                  

Purchase commitments under agreements relate to arrangements entered into with suppliers of polysilicon, ingots and wafers. These agreements specify future quantities and pricing of products to be supplied by the vendors for periods up to 12 years and there are certain consequences, such as forfeiture of advanced deposits and penalty payments relating to previous purchases, in the event that we terminate the arrangements. Customer advances relate to advance payments received from customers for future purchases of solar power products. Non-cancelable purchase orders relate to purchase commitments for equipment and building improvements for the Company’s manufacturing facilities. Lease commitments primarily relate to our 5-year lease agreement with Cypress for our headquarters in San Jose, California, a 15-year lease agreement with Cypress for our manufacturing facility in the Philippines and a 5-year lease agreement with an unaffiliated third party for a second facility in the Philippines.

In December 2006, PowerLight entered into an eleven-year lease agreement for a 175,000 square foot facility in Richmond, California, for office, light industrial and research and development use. PowerLight’s move to the new facility is scheduled for the fourth quarter of 2007.

In January 2007, PowerLight entered into a 120 megawatt, three-year supply agreement with JingAo Solar Co., Ltd, a privately-owned solar cell manufacturer based in Hebei, China. The agreement calls for JingAo to deliver increasing volumes of silicon solar cells to PowerLight beginning in 2007. This contract is the most recent in a series of long-term PV cell contracts completed by PowerLight.

Recent Accounting Pronouncements

In June 2006, the Financial Accounting Standards Board (“FASB”) issued FASB Interpretation No. 48, “Accounting for Uncertainty in Income Taxes, and Related Implementation Issues” (“FIN 48”). FIN 48 clarifies the accounting for uncertainty in income taxes recognized in a Company’s financial statements in accordance with FASB 109, “Accounting for Income Taxes.” FIN 48 prescribes a recognition threshold and measurement attribute for a tax position taken or expected to be taken in a tax return. FIN 48 also provides guidance on derecognition, classification, interest and penalties, accounting in interim periods, disclosure, and transition. FIN 48 is effective as of the beginning of fiscal years that begin after December 15, 2006. We are currently evaluating the effects of implementing this new standard.

In July 2006, the FASB issued EITF Issue No. 06-3, “How Taxes Collected from Customers Remitted to Governmental Authorities Should be Presented in the Income Statement (that is, Gross versus Net Presentation).” The adoption of EITF No. 06-3 did not have an impact on the Company’s consolidated financial statements. Our accounting policy is to present the above mentioned taxes on a net basis, excluded from revenues.

 

83


Table of Contents

In September 2006, the FASB issued Statement of Financial Accounting Standards (“SFAS”) No. 157, “Fair Value Measurements (“SFAS No. 157”). SFAS No. 157 defines fair value, establishes a framework for measuring fair value in accordance with generally accepted accounting principles, and expands disclosures about fair value instruments. This statement does not require any new fair value measurements; rather, it applies under other accounting pronouncements that require or permit fair value measurements. The provisions of this statement are to be applied prospectively as of the beginning of the fiscal year in which this statement is initially applied, with any transition adjustment recognized as a cumulative effect adjustment to the opening balance of retained earnings. The provisions of SFAS No. 157 are effective for fiscal years beginning after November 15, 1007; therefore, we anticipate adopting this standard as of January 1, 2008. We have not determined the effect, if any, the adoption of this statement will have on it consolidated financial statements.

In September 2006, the Securities and Exchange Commission (SEC) issued Staff Accounting Bulletin (“SAB”) No. 108, “Considering the Effects of Prior Year Misstatements when Quantifying Misstatements in Current Year Financial Statements,” to eliminate the diversity of practice surrounding how public companies quantify financial statement misstatements. Traditionally, there have been two widely-recognized methods for quantifying the effects of financial statement misstatements: the “roll-over” method and the “iron curtain” method. The roll-over method focuses primarily on the impact of a misstatement on the income statement, including the reversing effect of prior misstatements, but its use can lead to the accumulation of misstatements in the balance sheet. The iron-curtain method focuses primarily on the effect of correcting the period-end balance sheet with less emphasis on the reversing effects of prior year errors on the income statement. In SAB No. 108, the SEC Staff established an approach that requires quantification of financial statement misstatements based on the effects of the misstatements on each financial statement and the related financial statement disclosures. This model is commonly referred to as a “dual approach” because it requires quantification of errors under both the iron curtain and the roll-over methods. We adopted SAB No. 108 in the fourth quarter of 2006 and the adoption had no impact on its consolidated financial statements.

In September 2006, the FASB issued SFAS No. 158, “Employers’ Accounting for Defined Benefit Pension and Other Postretirement Plans—An Amendment of FASB Statements No. 87, 88, 106, and 132R,” which requires that the funded status of defined benefit postretirement plans be recognized on the company’s balance sheet, and changes in the funded status be reflected in comprehensive income, effective fiscal years ending after December 15, 2006. The adoption of SFAS No. 158 did not have a material impact on our consolidated results of operations and financial condition.

In February 2007, the FASB issued SFAS No. 159, “The Fair Value Option for Financial Assets and Financial Liabilities,” which provides companies an option to report selected financial assets and liabilities at fair value. SFAS No. 159 requires companies to provide information helping financial statement users to understand the effect of a company’s choice to use fair value on its earnings, as well as to display the fair value of the assets and liabilities a company has chosen to use fair value for on the face of the balance sheet. Additionally, SFAS No. 159 establishes presentation and disclosure requirements designed to simplify comparisons between companies that choose different measurement attributes for similar types of assets and liabilities. The statement is effective as of the beginning of an entity’s first fiscal year beginning after November 15, 2007. We have not determined the effect, if any, the adoption of this statement will have on our consolidated financial statements.

ITEM 7A: QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Interest Rate Risk

Our exposure to market risks for changes in interest rates relates primarily to our investment portfolio. As of December 31, 2006, our cash equivalents consisted of money market funds and commercial paper. Due to the short-term nature of our investment portfolio, we do not believe that an immediate 10% increase in interest rates would have a material effect on the fair market value of our portfolio. Since we believe we have the ability to liquidate this portfolio, we do not expect our operating results or cash flows to be materially affected to any significant degree by a sudden change in market interest rates on our investment portfolio.

 

84


Table of Contents

Foreign Currency Exchange Risk

Our exposure to adverse movements in foreign currency exchange rates is primarily related to sales to European customers that are denominated in Euros and procurement of certain capital equipment in Euros. For the years ended December 31, 2006 and 2005, approximately 68% and 70%, respectively, of our total revenue was generated outside the United States. A hypothetical change of 10% in foreign currency exchange rates could impact our consolidated financial statements or results of operations by $14.7 million based on our outstanding forward contracts of $127.2 million and option contracts of $16.0 million, or combined contracts of $143.2 million, as of December 31, 2006. We currently conduct hedging activities, which involve the use of currency forward contracts. We cannot predict the impact of future exchange rate fluctuations on our business and operating results. In the past, we have experienced an adverse impact on our revenue and profitability as a result of foreign currency fluctuations. We believe that we may have increased risk associated with currency fluctuations in the future.

Our PowerLight subsidiary, acquired on January 10, 2007, also has substantial purchased and sales denominated in Euros and is, therefore, subject to similar foreign currency exchange risk as our historical business.

 

85


Table of Contents

ITEM 8: FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

SUNPOWER CORPORATION

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

 

     Page(s)

REPORTS OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

  

SUCCESSOR COMPANY

   87

PREDECESSOR COMPANY

   89

FINANCIAL STATEMENTS

  

CONSOLIDATED BALANCE SHEETS

   90

CONSOLIDATED STATEMENTS OF OPERATIONS

   91

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY (DEFICIT)

   92

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)

   93

CONSOLIDATED STATEMENTS OF CASH FLOWS

   94

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

   95

 

86


Table of Contents

Report of Independent Registered Public Accounting Firm on Successor Company

To the Board of Directors and Stockholders of

SunPower Corporation

We have completed an integrated audit of SunPower Corporation’s December 31, 2006 consolidated financial statements and of its internal control over financial reporting as of December 31, 2006, and audits of the consolidated financial statements as of and for the year ended January 1, 2006 and for the period from November 9, 2004 to January 2, 2005 in accordance with the standards of the Public Company Accounting Oversight Board (United States). Our opinions, based on our audits, are presented below.

Consolidated financial statements

In our opinion, the accompanying balance sheets and related consolidated statements of operations, of stockholders’ equity (deficit), of comprehensive income (loss) and of cash flows present fairly, in all material respects, the financial position of SunPower Corporation and its subsidiaries (“Successor Company” or the “Company”) at December 31, 2006 and January 1, 2006, and the results of their operations and their cash flows for each of the two years in the period ended December 31, 2006 and the period from November 9, 2004 to January 2, 2005 in conformity with accounting principles generally accepted in the United States of America. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits. We conducted our audits of these statements in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit of financial statements includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

As discussed in Note 14 to the consolidated financial statements, the Company changed the manner in which it accounts for stock-based compensation in 2006.

Internal control over financial reporting

Also, in our opinion, management’s assessment, included in Management’s Report on Internal Control Over Financial Reporting appearing under Item 9A, that the Company maintained effective internal control over financial reporting as of December 31, 2006, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), is fairly stated, in all material respects, based on those criteria. Furthermore, in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2006, based on criteria established in Internal Control—Integrated Framework issued by the COSO. The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting. Our responsibility is to express opinions on management’s assessment and on the effectiveness of the Company’s internal control over financial reporting based on our audit. We conducted our audit of internal control over financial reporting in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. An audit of internal control over financial reporting includes obtaining an understanding of internal control over financial reporting, evaluating management’s assessment, testing and evaluating the design and operating effectiveness of internal control, and performing such other procedures as we consider necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinions.

 

87


Table of Contents

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

/s/ PricewaterhouseCoopers LLP

San Jose, California

March 1, 2007

 

88


Table of Contents

Report of Independent Registered Public Accounting Firm on Predecessor Company

To the Board of Directors and Stockholders of

SunPower Corporation

In our opinion, the accompanying consolidated statements of operations, of stockholders’ deficit, of comprehensive loss and of cash flows present fairly, in all material respects, the results of operations and cash flows of SunPower Corporation and its subsidiaries (Predecessor Company) for the period from December 29, 2003 to November 8, 2004 in conformity with accounting principles generally accepted in the United States of America. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audit. We conducted our audits of these statements in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. We believe that our audit provides a reasonable basis for our opinion.

/s/ PricewaterhouseCoopers LLP

San Jose, California

August 25, 2005

 

89


Table of Contents

SunPower Corporation

Consolidated Balance Sheets

(in thousands, except share and per share data)

 

     December 31,
2006
    December 31,
2005
 

Assets

    

Current assets:

    

Cash and cash equivalents

   $ 165,596     $ 143,592  

Short-term investments

     16,496       —    

Accounts receivable, net

     51,680       25,498  

Inventories

     22,780       13,147  

Advances to suppliers, current portion

     15,394       278  

Prepaid expenses and other current assets

     16,655       2,958  
                

Total current assets

     288,601       185,473  

Property, plant and equipment, net

     202,428       110,559  

Goodwill

     2,883       2,883  

Intangible assets, net

     14,049       18,739  

Other long-term assets

     6,633       —    

Advances to suppliers, net of current portion

     62,242       —    
                

Total assets

   $ 576,836     $ 317,654  
                

Liabilities and stockholders’ equity

    

Current liabilities:

    

Accounts payable

   $ 26,534     $ 14,194  

Accounts payable to Cypress

     2,909       2,533  

Accrued liabilities

     18,585       4,541  

Current portion of customer advances

     12,304       8,962  
                

Total current liabilities

     60,332       30,230  

Deferred tax liability

     46       336  

Customer advances, net of current portion

     27,687       28,438  
                

Total liabilities

     88,065       59,004  
                

Commitments and Contingencies (Note 9)

    

Stockholders’ Equity:

    

Preferred stock, $0.001 par value per share; 10,042,490 shares authorized; none issued and outstanding

     —         —    

Common stock: $0.001 par value; 375,000,000 shares authorized; 69,849,369 and 61,092,484 shares issued and outstanding at December 31, 2006 and 2005, respectively

     70       61  

Additional paid-in capital

     522,819       316,617  

Accumulated other comprehensive income (loss)

     (2,101 )     505  

Accumulated deficit

     (32,017 )     (58,533 )
                

Total stockholders’ equity

     488,771       258,650  
                

Total liabilities and stockholders’ equity

   $ 576,836     $ 317,654  
                

The accompanying notes are an integral part of these financial statements.

 

90


Table of Contents

SunPower Corporation

Consolidated Statements of Operations

(in thousands, except per share data)

 

      Successor Company     Predecessor Company  
        Year Ended December 31,     

Nov. 9, 2004

Through

Dec. 31, 2004

   

Jan. 1, 2004

Through

Nov. 8, 2004

 
      2006      2005      

Revenue

   $ 236,510      $ 78,736     $ 4,055     $ 6,830  
                                   

Costs and expenses:

         

Cost of revenue

     186,042        74,353       6,079       9,498  

Research and development

     9,684        6,488       1,417       12,118  

Sales, general and administrative

     21,677        10,880       1,111       4,713  
                                   

Total costs and expenses

     217,403        91,721       8,607       26,329  
                                   

Operating income (loss)

     19,107        (12,985 )     (4,552 )         (19,499 )

Interest income

     10,086        1,591       3       15  

Interest expense

     (1,809 )      (3,185 )     (1,072 )     (3,759 )

Other income (expense), net

     1,077        (1,214 )     12       (59 )
                                   

Income (loss) before income tax provision

     28,461        (15,793 )     (5,609 )     (23,302 )

Income tax provision

     1,945        50       —         —    
                                   

Net income (loss)

   $ 26,516      $ (15,843 )   $ (5,609 )   $ (23,302 )
                                   

Net income (loss) per share:

         

Basic

   $ 0.40      $ (0.68 )   $ (2,804.50 )   $ (5.51 )

Diluted

   $ 0.37      $ (0.68 )   $ (2,804.50 )   $ (5.51 )

Weighted-average shares:

         

Basic

     65,864        23,306       2       4,230  

Diluted

     71,087        23,306       2       4,230  

 

The accompanying notes are an integral part of these financial statements.

 

91


Table of Contents

SunPower Corporation

Consolidated Statements of Stockholders’ Equity (Deficit)

(in thousands)

 

    Redeemable
Convertible
Preferred Stock
    Common
Stock
    Additional Paid-in
Capital
  Accumulated
Other
Comprehensive
Income (loss)
    Accumulated
Deficit
    Total
Stockholders’
Equity
(Deficit)
 
    Shares     Value     Shares     Value          

Balances at December 31, 2003 (Predecessor Company)

  14,308     $ 9,366     4,173     $ 4     $ 8,890   $ —       $ (29,373 )   $ (20,479 )

Issuance of common stock upon exercise of options

  —         —       278       —         149     —         —         149  

Warrants issued to Cypress in connection with promissory note

  —         —       —         —         11,023     —         —         11,023  

Issuance of common stock upon exercise of warrants

  —         —       632       —         75     —         —         75  

Issuance of common stock upon conversion of convertible notes payable and related interest

  —         —       1,671       2       1,948     —         —         1,950  

Issuance of common stock upon conversion of redeemable convertible preferred stock

  (1,393 )     (814 )   696       1       813     —         —         814  

Merger with Cypress

  —         —       (7,450 )     (7 )     7     —         —         —    

Compensation related to the issuance of stock options to non-employees

  —         —       —         —         131     —         —         131  

Net loss

  —         —       —         —         —       —         (23,302 )     (23,302 )
                                                         

Balances at November 8, 2004 (Predecessor Company)

  12,915       8,552     —         —         23,036     —         (52,675 )     (29,639 )
                                                         

Push down effect of merger with Cypress (see Note 2)

  —         —       —         —         11,305     —         15,594       26,899  
                                                         

Balance at November 9, 2004 (Successor Company)

  12,915       8,552     —         —         34,341     —         (37,081 )     (2,740 )
                                                         

Issuance of common stock upon exercise of options

  —         —       2       —         1     —         —         1  

Compensation related to the issuance of stock options to non-employees

  —         —       —         —         25     —         —         25  

Net unrealized loss on derivatives, net of tax

  —         —       —         —         —       (2,341 )     —         (2,341 )

Net loss

  —         —       —         —         —       —         (5,609 )     (5,609 )
                                                         

Balances at December 31, 2004 (Successor Company)

  12,915       8,552     2       —         34,367     (2,341 )     (42,690 )     (10,664 )
                                                         

Issuance of common stock upon exercise of options

  —         —       217       —         177     —         —         177  

Issuance of common stock to Cypress upon conversion of debt

  —         —       20,169       20       68,310     —         —         68,330  

Issuance of common stock to Cypress upon conversion of accounts payable

  —         —       3,060       3       14,712     —         —         14,715  

Issuance of common stock to Cypress

  —         —       6,346       6       27,366     —         —         27,372  

Issuance of series two preferred stock to Cypress

  14,000       7,000     —         —         —       —         —         —    

Issuance of series two preferred stock to Cypress upon conversion of debt

  18,000       9,000     —         —         —       —         —         —    

Issuance of common stock to Cypress upon conversion redeemable convertible preferred stock

  (44,915 )     (24,552 )       22,458       23       24,529     —         —         24,552  

Issuance of restricted stock to employees

  —         —       15       —         —       —         —         —    

Compensation on stock options issued to non-employees

  —         —       —         —         1,556     —         —         1,556  

Proceeds from initial public offering, net of offering expenses

  —         —       8,825       9       145,600     —         —         145,609  

Net unrealized gain on derivatives, net of tax

  —         —       —         —         —       2,846       —         2,846  

Net loss

  —         —       —         —         —       —         (15,843 )     (15,843 )
                                                         

Balances at December 31, 2005 (Successor Company)

  —         —       61,092       61       316,617     505       (58,533 )     258,650  
                                                         

Issuance of common stock upon exercise of options

  —         —       1,529       2       3,867     —         —         3,869  

Issuance of restricted stock to employees, net of cancellations

  —         —       228       —         —       —         —         —    

Issuance of common stock in relation to follow-on offering, net of offering expenses

  —         —       7,000       7       197,424     —         —         197,431  

Stock-based compensation expense

  —         —       —         —         4,911     —         —         4,911  

Net unrealized loss on derivatives, net of tax

  —         —       —         —         —       (2,606 )     —         (2,606 )

Net income

  —         —       —         —         —       —         26,516       26,516  
                                                         

Balances at December 31, 2006 (Successor Company)

  —       $ —       69,849     $ 70     $ 522,819   $ (2,101 )   $ (32,017 )   $ 488,771  
                                                         

The accompanying notes are an integral part of these financial statements.

 

92


Table of Contents

SunPower Corporation

Consolidated Statements of Comprehensive Income (Loss)

(in thousands)

 

     Successor Company     Predecessor
Company
 
     Year Ended
December 31,
    Nov. 9, 2004
Through
Dec. 31, 2004
    Jan. 1, 2004
Through
Nov. 8, 2004
 
     2006      2005      

Net income (loss)

   $ 26,516      $ (15,843 )   $ (5,609 )       $ (23,302 )

Other comprehensive income (loss):

              

Unrealized gain (loss) on derivatives, net of tax

     (2,606 )      2,846       (2,341 )     —    
                                 

Total comprehensive income (loss)

   $ 23,910      $ (12,997 )   $ (7,950 )   $ (23,302 )
                                 

 

The accompanying notes are an integral part of these financial statements.

 

93


Table of Contents

SunPower Corporation

Consolidated Statements of Cash Flows

(in thousands)

 

     Successor Company     Predecessor
Company
 
     Year Ended December 31,     Nov. 9, 2004
Through
Dec. 31, 2004
    Jan. 1, 2004
Through
Nov. 8, 2004
 
     2006     2005      

Cash flows from operating activities:

             

Net income (loss)

   $ 26,516     $ (15,843 )   $ (5,609 )   $ (23,302 )

Adjustments to reconcile net income (loss) to net cash provided by (used in) operating activities:

             

Interest expense related to warrants granted and accrued interest on notes payable

     —         3,381       1,072       3,759  

Depreciation

     16,363       7,147       556       1,590  

Amortization of intangible assets

     4,690       4,704       573       —    

Impairment charge related to equipment

     —         461       —         —    

Stock-based compensation

     4,864       1,556       650       131  

(Gain) loss on sale of fixed assets

     (16 )     82       —         —    

Changes in operating assets and liabilities:

             

Accounts receivable

     (26,182 )     (20,940 )     (2,528 )     (1,080 )

Inventories

     (9,586 )     (8,731 )     (1,325 )     (1,823 )

Prepaid expenses and other current assets

     (3,697 )     63       (2,334 )     (375 )

Advances to suppliers

     (77,358 )     (278 )     —         —    

Accounts payable

     12,340       2,614       5,091       3,300  

Accounts payable to Cypress

     376       6,139       1,222       4,277  

Accrued liabilities and deferred tax liabilities

     11,148       16       3,032       (498 )

Customer advances

     2,591       37,400       —         —    
                                

Net cash provided by (used in) operating activities

     (37,951 )     17,771       400       (14,021 )
                                

Cash flows from investing activities:

             

Purchase of property, plant and equipment

     (108,307 )     (71,616 )     (9,691 )     (17,231 )

Purchase of marketable securities

     (33,996 )     —         —         —    

Proceeds from sales of marketable securities

     17,500       —         —         —    

Proceeds from sale of fixed assets

     91       1,251       —         —    

Note receivable

     (10,000 )     —         —         —    

Investment in joint venture

     (4,994 )     —         —         —    

Other long-term assets

     (1,639 )     —         —         —    
                                

Net cash used in investing activities

     (141,345 )     (70,365 )     (9,691 )         (17,231 )
                                

Cash flows from financing activities:

             

Proceeds from debt obligations to Cypress

     —         12,500       9,000       30,100  

Proceeds from issuance of preferred stock Cypress

     —         7,000       —         —    

Proceeds from issuance of common stock to Cypress

     —         27,372       —         —    

Proceeds from public issuance of common stock, net of offering expenses

     —         145,609       —         —    

Proceeds from follow-on offering of common stock, net of offering expenses

     197,431       —         —         —    

Principal payments of notes payable to Cypress

     —         (248 )     (99 )     (495 )

Proceeds from exercise of stock options

     3,869       177       1       224  
                                

Net cash provided by financing activities

     201,300       192,410       8,902       29,829  
                                

Net increase (decrease) in cash and cash equivalents

     22,004       139,816       (389 )     (1,423 )

Cash and cash equivalents at beginning of period

     143,592       3,776       4,165       5,588  
                                

Cash and cash equivalents at end of period

   $ 165,596     $ 143,592     $ 3,776     $ 4,165  
                                

Non-cash transactions:

             

Relative fair value of warrants issued (reduction related to debt conversion)

   $ —       $ (7,706 )   $ —       $ 11,023  

Conversion of notes payable to preferred stock

     —         9,000       —         —    

Conversion of notes payable to common stock

     —         76,036       —         1,950  

Conversion of accounts payable to common stock

     —         14,715       —         —    

Conversion of preferred stock to common stock

     —         24,552       —         814  

Cancellation of common stock

     —         —         —         (10,449 )

Supplemental cash flow information:

             

Cash paid for interest

     1,690       —         —         —    

Cash paid for income taxes

     —         —         —         —    

The accompanying notes are an integral part of these financial statements.

 

94


Table of Contents

SunPower Corporation

Notes to Consolidated Financial Statements

Note 1. The Company and Summary of Significant Accounting Policies

The Company and Basis of Presentation

SunPower Corporation (the “Company” or “SunPower”), a majority-owned subsidiary of Cypress Semiconductor Corporation (“Cypress”), was originally incorporated in the State of California on April 24, 1985. In October 1988, the Company organized as a business venture to commercialize high-efficiency or solar cell technologies. The Company designs, develops, manufactures, markets and sells solar electric power products, systems and services based on its proprietary processes and technologies. In addition, the Company offers imaging detectors and infrared detectors based on its solar power technology.

On November 10, 2005, the Company reincorporated in Delaware and filed an amendment to its certificate of incorporation to effect a 1-for-2 reverse stock split of the Company’s outstanding and authorized shares of common stock. All share and per share figures presented herein have been adjusted to reflect the reverse stock split.

In November 2005, the Company raised net proceeds of $145.6 million in an initial public offering of 8.8 million shares of common stock at a price of $18.00 per share. In June 2006, the Company completed a follow-on public offering of 7.0 million shares of its common stock, at a per share price of $29.50, and received net proceeds of $197.4 million.

In November 2006, the Company signed a definitive agreement to acquire PowerLight Corporation (“PowerLight”), a privately-held leading provider of large-scale solar power systems. The transaction was subsequently completed in the first quarter of fiscal 2007 for total consideration of $334.4 million, consisting of $120.7 million in cash and $210.7 million in common stock and options to purchase Class A common stock as well as approximately $3.0 million of direct transaction costs. In February 2007, the Company issued $200.0 million in principal amount of its 1.25% senior convertible debentures. See Note 17 for additional information on the acquisition and senior convertible debentures.

Cypress made a significant investment in the Company in 2002. On November 9, 2004, Cypress completed a reverse triangular merger with the Company in which all of the outstanding minority equity interest of SunPower was retired, effectively giving Cypress 100% ownership of all of our then outstanding shares of capital stock but leaving its unexercised warrants and options outstanding. This transaction resulted in the “push down” of the effect of the acquisition of SunPower by Cypress and created a new basis of accounting. As a result, the balance sheet, statements of operations, cash flows and stockholders’ deficit for the periods up to November 8, 2004 are presented as the “Predecessor Company,” and all subsequent financial statements are presented as the “Successor Company.” After completion of the Company’s initial public offering in November 2005 (“IPO”), Cypress held, in the aggregate, 52,033,287 shares of class B common stock. As of December 31, 2006, including the effect of the secondary public offering in June 2006, Cypress held approximately 75% of the Company’s total outstanding shares of common stock, or approximately 70% on a fully diluted basis after taking into account outstanding stock options, and holds approximately 96% of the voting power of the Company’s total outstanding capital stock.

The financial statements include allocations of certain Cypress expenses, including centralized legal, tax, treasury, information technology, employee benefits and other Cypress corporate services and infrastructure costs. The expense allocations have been determined based on a method that Cypress and the Company considered to be reasonable reflections of the utilization of services provided or the benefit received by the Company. The financial information included herein may not be indicative of the consolidated financial position, operating results, and cash flows of the Company in the future, or what they would have been had the Company been a separate stand-alone entity during the periods presented. See Note 3 for additional information on the transactions with Cypress.

 

95


Table of Contents

SunPower Corporation

Notes to Consolidated Financial Statements—(Continued)

 

As of December 31, 2006, the Company had an accumulated deficit of $32.0 million and, with the exception of fiscal 2006, has a history of operating losses. The Company is subject to a number of business risks including, but not limited to, an industry-wide shortage of polysilicon, an essential raw material in the production of solar cells; limited suppliers for capital equipment; concentration of revenue among few customers; competition from other companies with a longer operating history and significantly greater financial resources; dependency on a third-party subcontractor; the ability to obtain adequate financing to fund operating activities; dependence on key employees; and the ability to attract and retain additional qualified personnel.

Principles of Consolidation

The consolidated financial statements are prepared in accordance with accounting principles generally accepted in the United States of America and include the accounts of the Company and all of its subsidiaries. Intercompany transactions and balances have been eliminated in consolidation.

Reclassifications

Certain reclassifications have been made to the prior year consolidated financial statements to conform to the current year’s presentation. Such reclassification had no effect on previously reported results of operations or retained earnings.

Fiscal Years

The Company reports results of operations on the basis of 52 or 53-week periods, ending on the Sunday closest to December 31. Fiscal 2006 ended on December 31, 2006 and consisted of 52 weeks, fiscal 2005 ended on January 1, 2006 and consisted of 52 weeks and the combined periods of fiscal 2004 ended on January 2, 2005 and consisted of 53 weeks. For presentation purposes only, the consolidated financial statements and notes refer to the calendar year end and month end of each respective period.

Management Estimates

The preparation of financial statements in conformity with generally accepted accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the amounts reported in the financial statements and accompanying notes. Significant estimates in these financial statements include allowances for doubtful accounts receivable, inventory write-downs, estimates for future cash flows and economic useful lives of property, plant and equipment, asset impairments, certain accrued liabilities including accrued warranty reserves and income taxes and tax valuation allowances. Actual results could differ from those estimates.

Fair Value of Financial Instruments

The fair value of a financial instrument is the amount at which the instrument could be exchanged in a current transaction between willing parties. The carrying values of cash and cash equivalents, short-term investments, accounts receivable, accounts payable and accrued liabilities approximate their respective fair values due to their short-term maturities.

Comprehensive Income (Loss)

Comprehensive income (loss) is defined as the change in equity during a period from non-owner sources. The Company’s comprehensive income (loss) for each period presented is comprised of the Company’s net income (loss) and the changes in unrealized gains or losses, net of tax, for derivatives designated as cash flow hedges (see Note 10) and available-for-sale investments carried at their fair value based on quoted market prices as of the

 

96


Table of Contents

SunPower Corporation

Notes to Consolidated Financial Statements—(Continued)

 

balance sheet dates (see Note 6). Comprehensive income (loss) is presented in the Consolidated Statements of Comprehensive Income (Loss).

Cash and Cash Equivalents